Siemens FC361 Series User manual

FC361-xx
Fire control panel
Technical Manual
A6V10421795_en
--
_g
Building Technologies
2016-11-18 Control Products and Systems

Legal notice
2 | 124
Building Technologies
A6V10421795_en
--
_g
Fire safety
2016
-
11
-
18
Legal notice
Technical specifications and availability subject to change without notice.
Transmittal, reproduction, dissemination and/or editing of this document as well as
utilization of its contents and communication thereof to others without express
authorization are prohibited. Offenders will be held liable for payment of damages.
All rights created by patent grant or registration of a utility model or design patent
are reserved.
Issued by:
Siemens Switzerland Ltd.
Building Technologies Division
International Headquarters
Gubelstrasse 22
CH-6301 Zug
Tel. [phone]
www.siemens.com/buildingtechnologies
Edition: 2016-11-18
Document ID: A6V10421795_en--_g
© Siemens Switzerland Ltd, 2015

3 | 124
Building Technologies
A6V10421795_en
--
_g
Fire safety
2016
-
11
-
18
Table of Contents
1About this document ................................................................................... 7
1.1 Applicable documents .....................................................................................9
1.2 Download center ...........................................................................................10
1.3 Abbreviations.................................................................................................10
1.4 History of changes.........................................................................................11
2Safety....................................................................................................... 13
2.1 Intended use..................................................................................................13
2.2 Safety instructions .........................................................................................13
2.3 Safety regulations for the method of operation .............................................14
2.4 Release notes ...............................................................................................16
2.5 Cyber security disclaimer ..............................................................................17
3System description ................................................................................... 18
3.1 System overview ...........................................................................................18
3.2 Features ........................................................................................................19
3.3 Panel types....................................................................................................20
3.4 Technical data ...............................................................................................21
3.4.1 General data ..................................................................................21
3.4.2 Electrical data ................................................................................22
3.4.3 Mechanical data.............................................................................23
3.4.4 Environmental conditions...............................................................23
3.5 Structure........................................................................................................24
4Options with requirements ........................................................................ 25
5Installation ................................................................................................ 26
5.1 Instruction......................................................................................................26
5.2 Surface mounting ..........................................................................................28
5.3 Power supply - mains voltage .......................................................................29
5.4 Battery ...........................................................................................................30
5.5 Connection overview .....................................................................................31
5.6 C-NET detector line.......................................................................................32
5.6.1 Connectable C-NET devices .........................................................33
5.6.2 C-NET topology .............................................................................35
5.6.3 Wiring on C-NET devices ..............................................................36
5.7 Sounder.........................................................................................................38
5.8 Inputs / outputs..............................................................................................39
5.9 Relay .............................................................................................................41
5.10 Terminals and switches.................................................................................42

Building Technologies
A6V10421795_en
--
_g
Fire safety
2016
-
11
-
18
4 | 124
5.11 Accessories ...................................................................................................44
5.11.1 Key switch (FCA3601-Z1) / Key switch (Nordic) (FCA3603-Z1) ...44
5.11.2 Evacuation module (NL) (FTO3601-H1)........................................45
5.11.3 LED indicator (16 zones) (FTO3602-Z1) .......................................46
5.11.4 Output card (4M) (FCA3602-Z1)....................................................47
5.11.5 RS232 module ...............................................................................50
5.11.6 Event printer (Optional)..................................................................51
5.12 Spare Parts ...................................................................................................52
5.12.1 Mainboard FCM3601-Z1................................................................52
5.12.2 Door incl. PMI FHD3601-Z1 ..........................................................54
6Function overview......................................................................................55
6.1 Access levels.................................................................................................55
6.2 LED indicators ...............................................................................................56
6.3 Keys...............................................................................................................57
6.4 LCD ...............................................................................................................58
6.5 Operating menu overview .............................................................................59
6.6 Entry of numbers and letters .........................................................................61
6.7 Event views ...................................................................................................62
6.7.1 Sample of Alarm view ....................................................................62
6.7.2 Sample of Fault view......................................................................63
6.7.3 Sample of Isolation view ................................................................63
7Operation ..................................................................................................64
7.1 Alarm procedure in unmanned mode............................................................64
7.2 Alarm procedure in manned mode................................................................66
7.3 Procedure in case of fault..............................................................................67
7.4 Access level 1 ...............................................................................................68
7.4.1 System status ................................................................................68
7.4.2 Login ..............................................................................................69
7.4.3 Query alarm count .........................................................................70
7.4.4 About..............................................................................................70
7.5 Access level 2 ...............................................................................................71
7.5.1 Isolation..........................................................................................71
7.5.2 Test ................................................................................................73
7.5.3 Event memory................................................................................76
7.5.4 Logout ............................................................................................79
7.6 Access level 3 ...............................................................................................80
7.6.1 Test log ..........................................................................................80
8Engineering ...............................................................................................81
8.1 Set date & time..............................................................................................81
8.2 Edit zone and section name ..........................................................................82
8.3 Change password .........................................................................................83

5 | 124
Building Technologies
A6V10421795_en
--
_g
Fire safety
2016
-
11
-
18
8.4 Detector line ..................................................................................................84
8.4.1 Restart ...........................................................................................84
8.4.2 Power off........................................................................................84
8.4.3 Read in...........................................................................................85
8.4.4 Maintenance ..................................................................................86
8.4.5 Auto configuration..........................................................................89
8.4.6 View / Locate .................................................................................90
8.4.7 Reset detection module .................................................................92
8.5 Calibrate output card (4M) ............................................................................93
8.6 Reset alarm counter ......................................................................................94
8.7 Restore factory settings ................................................................................94
8.8 Configuration tools ........................................................................................95
8.8.1 Connect PC to panel......................................................................95
9Commissioning......................................................................................... 96
9.1 Install and check the detector line.................................................................96
9.2 Install panel ...................................................................................................97
9.3 Startup panel .................................................................................................97
9.4 General commissioning steps .......................................................................97
9.4.1 Auto configure detector line ...........................................................97
9.4.2 Configure the system manually .....................................................98
9.4.3 Function test ................................................................................100
9.4.4 Completing work ..........................................................................100
9.5 Set Windows firewall ...................................................................................101
9.6 Update firmware ..........................................................................................103
9.7 Backup configuration to PC.........................................................................104
9.8 Restore configuration to panel ....................................................................104
9.9 Backup event log to PC...............................................................................104
9.10 Backup test report to PC .............................................................................105
9.11 Factory reset ...............................................................................................105
9.12 Add output card (4M) ..................................................................................105
10 Maintenance............................................................................................106
10.1 General........................................................................................................106
10.2 Preparatory work .........................................................................................106
10.3 Function test................................................................................................107
10.4 Device test...................................................................................................108
10.5 Completion of work......................................................................................108
11 Trouble shooting......................................................................................109
11.1 Fault message indication ............................................................................109
11.2 Panel ...........................................................................................................109
11.3 Accessories .................................................................................................110
11.4 Recover short fault of detector line .............................................................110
12 Components and spare parts...................................................................111
13 Environmental protection and disposal.....................................................112
14 Appendix A: Alarm Verification Concept (AVC) ........................................113
15 Appendix B: Zone type list .......................................................................115

Building Technologies
A6V10421795_en
--
_g
Fire safety
2016
-
11
-
18
6 | 124
16 Appendix C: Flash file behaviors..............................................................116
17 Appendix D: Default setting for panel/devices ..........................................117
18 Appendix E: Switch mains to AC 115 V....................................................121
Index ................................................................................................................122

About this document
Applicable documents
1
7 | 124
Building Technologies
A6V10421795_en
--
_g
Fire safety
2016
-
11
-
18
1About this document
●Specialist electrical engineering knowledge is required for installation.
●Only an expert is permitted to carry out installation work.
Incorrect installation can take safety devices out of operation unbeknown to a
layperson.
Goal and purpose
The information provided in this manual is a summary of the key procedures and
functions required to assemble, install, operate, commission and maintain the
system.
It is intended to provide experienced and qualified personnel a guide on the
required processes.
Scope
The technical manual applies to the Cerberus FIT fire control panel FC361-xx
series.
Target groups
The information in this document is intended for the following target groups:
Target group Activity Qualification
Installation personnel ●Assembles and installs the product
components at the place of
installation.
●Carries out a performance check
following installation.
●Has received specialist training in
the area of building installation
technology or electrical installations.
Commissioning personnel ●Configure the product at the place of
installation according to customer-
specific requirements.
●Check the product operability and
release the product for use by the
operator.
●Searches for and corrects
malfunctions.
●Has obtained suitable specialist
training for the function and for the
products.
●Has attended the training courses
for commissioning personnel.
Operating personnel ●Carries out procedures to correctly
operate the product.
●No particular basic training is
needed.
●Has been instructed by the
commissioning personnel.
Maintenance personnel ●Carries out all maintenance work.
●Checks that the products are in
perfect working order.
●Searches for and corrects
malfunctions.
●Has obtained suitable specialist
training for the function and for the
products.

About this document
Applicable documents
1
8 | 124
Building Technologies
A6V10421795_en
--
_g
Fire safety
2016
-
11
-
18
Document identification
The document ID is structured as follows:
A6Vxxxxxxxx_aaAA_vv
A6Vxxxxxxxx_--AA_vv
A6Vxxxxxxxx_aa--_vv
A6Vxxxxxxxx_----_vv
ID coding1Description
A6Vxxxxxxx
x
STEP-ID generated by the STEP system
_Separator
aa Language abbreviation in accordance with ISO 639-1
AA Country abbreviation in accordance with ISO-3166-1
-- Multilingual or international
vv Document version, single or double digit: a, b, …z; aa, ab, …az;
ba, bb, …bz; etc.
1Some documents have different ID that are generated by an earlier system.
There are also documents with up-to date ID codes along with additional
features in the designation.
ID code Examples
ID_languageCOUNTRY_version
-- = multilingual or international
A6V10215123_deDE_a
A6V10215123_en--_a
A6V10315123_----_a
Date format
The date format in the document corresponds to the recommendation of
international standard ISO 8601 (format YYYY-MM-DD).
Reference document and source language
●The source language of this document is English (en).
●The reference version of this document is the international version in English.
The international version is not localized.
The reference document has the following designation:
ID_en--_x
x = version, en = English, -- = international

About this document
Applicable documents
1
9 | 124
Building Technologies
A6V10421795_en
--
_g
Fire safety
2016
-
11
-
18
Conventions for text marking
Markups
Special markups are shown in this document as follows:
⊳Requirement for a behavior instruction
1.
2.
Behavior instruction with at least two operation sequences
– Version, option, or detailed information for a behavior instruction
⇨Intermediate result of a behavior instruction
⇨End result of a behavior instruction
●Numbered lists and behavior instructions with an operation
sequence
[➙ X] Reference to a page number
'Text' Quotation, reproduced identically
<Key> Identification of keys
>In addition to mathematical operator, for identification between
steps in a sequence, e.g., 'Menu bar' > 'Help' > 'Help topics'
Supplementary information and tips
The 'i' symbol
identifies supplementary information and tips for an easier way of
working.
1.1 Applicable documents
The list below is used as a reference for the FC361-xx fire control panel and as a
supplement to this document.
Number Name
008250 Operation manual FDUL221 line tester
A6V10210416 FS720 Fire Detection System, Commissioning,
Maintenance, Troubleshooting
A6V10419665 Datasheet FC361-xx fire control panel
A6V10421792 Installation FC361-xx fire control panel
A6V10421797 Operation manual FC361-xx fire control panel (short)
A6V10431009 Installation FTO3601-H1 evacuation module (NL)
A6V10431011 Installation FTO3602-Z1 LED indicator (16 zones)
A6V10431013 Installation FCA3601-Z1 / FCA3603-Z1 key switch
A6V10431015 Installation FCA3602-Z1 output card (4M)
A6V10450591 Installation FHD3601-Z1 door incl. PMI
A6V10450593 Installation FCM3601-Z1 mainboard

About this document
Download center
1
10 | 124
Building Technologies
A6V10421795_en
--
_g
Fire safety
2016
-
11
-
18
Number Name
A6V10450595 Operation manual ‘FC360 Panel Configurator‘
A6V10882301 List of compatibility for FC361-xx fire control panel
A6V10893024 Installation FHA3602-Z1 semi flush mount bezel
1.2 Download center
You can download various types of documents, such as data sheets, installation
instructions, and license texts via the following Internet address:
http://siemens.com/bt/download
lEnter the document ID in the 'Find by keyword' input box.
You will also find information about search variants and links to mobile
applications (apps) for various systems on the home page.
1.3 Abbreviations
Abbreviations Explication
AVC Alarm Verification Concept
EOL End of Line
MCP Manual Call Point
PSU Power Supply Unit
PMI Person Machine Interface
EVAC Evacuation
GUI Graphical User Interface
EMC Electro Magnetic Compatibility

About this document
History of changes
1
11 | 124
Building Technologies
A6V10421795_en
--
_g
Fire safety
2016
-
11
-
18
1.4 History of changes
The reference document's version applies to all languages into which the reference
document is translated.
The first edition of a language version or a country variant may, for example, be
version 'd' instead of 'a' if the reference document is already this version.
The table below shows this document’s history of changes:
Version Edition date Brief description
g2016-11-18 Add information of mainboard FCM3601-Z1 and
door incl. PMI FHD3601-Z1 in chapter 5.12 and
chapter 12.
Change default setting of relay 3 in chapter 5.9
and 5.5.
Add ‘Intended use’ sub-chapter in chapter 2.1.
Some minor editorial changes.
f2016-08-23 Add technical information on output card (4M)
concerning creeping open / creeping short when
the output is configured as RT fault in chapter
5.11.4.
e2016-08-18 Add technical information on output card (4M)
concerning creeping open / creeping short in
chapter 3.4.2 and 5.11.4.
d2016-07-22 Completely update the document.
c2016-04-08 Add RS485 / RS232 communication parameters
in chapter 5.11.5.
Change name of ‘FC360 Tool’ to ‘FC360 Panel
Configurator’.
Change name of ‘FC360 Editor’ to ‘FC360
Desktop Editor’.
Change password of access level 3.1 in chapter
6.1.
Add information of updating firmware of FT2010
/ FT2011 / FDUL221 in chapter 9.7.
b2016-02-23 Add sticker information in chapter 5.2.
Add description to quit replace mode in chapter
8.3.4.3.
Add how to adjust brightness in chapter 11.2.
Update information in chapter 3.4.2 and chapter
5.8 about the total output current of configurable
IOs and Aux power output is max. 0.2 A.
Add access level 3.1 in chapter 6.1.
Add action of P2 line overload in chapter 11.2.
Add ‘Shielded cable is required.’ for RS485
application in chapter 5.11.5.
a2015-06-08 First version

About this document
History of changes
1
12 | 124
Building Technologies
A6V10421795_en
--
_g
Fire safety
2016
-
11
-
18
The table below shows the published language versions and country variants with
the corresponding modification index:
Modification index en_-- de_-- fr_-- it_-- es_--
g X - X X X
f X - - X -
e X - - - -
d X - - X -
c X - - - -
b X - - - -
a X - - - -
X = published
- = no publication with this modification index

Safety
Intended use
2
13 | 124
Building Technologies
A6V10421795_en
--
_g
Fire safety
2016
-
11
-
18
2Safety
2.1 Intended use
The panel is intended to be mounted in a building to detect, evaluate and alarm in
the event of fire, together with C-NET detector line.
2.2 Safety instructions
The safety notices must be observed in order to protect people and property.
The safety notices in this document contain the following elements:
●Symbol for danger
●Signal word
●Nature and origin of the danger
●Consequences if the danger occurs
●Measures or prohibitions for danger avoidance
Symbol for danger
This is the symbol for danger. It warns of risks of injury.
Follow all measures identified by this symbol to avoid injury or death.
Additional danger symbols
These symbols indicate general dangers, the type of danger or possible
consequences, measures and prohibitions, examples of which are shown in the
following table:
General danger Explosive atmosphere
Voltage/electric shock Laser light
Battery Heat
Signal word
The signal word classifies the danger as defined in the following table:
Signal word Danger level
DANGER DANGER identifies a dangerous situation, which will result
directly in death or serious injury if you do not avoid this
situation.
WARNING WARNING identifies a dangerous situation, which may
result in death or serious injury if you do not avoid this
situation.
CAUTION CAUTION identifies a dangerous situation, which could
result in slight to moderately serious injury if you do not
avoid this situation.
NOTICE NOTICE identifies possible damage to property that may
result from non-observance.

Safety
Safety regulations for the method of operation
2
14 | 124
Building Technologies
A6V10421795_en
--
_g
Fire safety
2016
-
11
-
18
How risk of injury is presented
Information about the risk of injury is shown as follows:
WARNING
Nature and
origin of the danger
Consequences if the danger occurs
●
Measures / prohibitions for danger avoidance
How possible damage to property is presented
Information about possible damage to property is shown as follows:
NOTICE
Nature and origin of the
danger
Consequences if the danger occurs
●
Measures / prohibitions for danger avoidance
2.3 Safety regulations for the method of operation
National standards, regulations and legislation
Siemens products are developed and produced in compliance with the relevant
European and international safety standards. Should additional national or local
safety standards or legislation concerning the planning, assembly, installation,
operation or disposal of the product apply at the place of operation, then these
must also be taken into account together with the safety regulations in the product
documentation.
Electrical installations
WARNING
Electrical voltage
Electric shock
●Work on electrical installations may only be carried out by qualified
electricians or by instructed persons working under the guidance and
supervision of a qualified electrician, in accordance with the electrotechnical
regulations.
●Wherever possible disconnect products from the power supply when carrying
out commissioning, maintenance or repair work on them.
●Lock volt-free areas to prevent them being switched back on again by mistake.
●Label the connection terminals with external voltage using a
'DANGER External voltage' sign.
●Route mains connections to products separately and fuse them with their own,
clearly marked fuse.
●Fit an easily accessible disconnecting device in accordance with IEC 60950-1
outside the installation.
●Produce earthing as stated in local safety regulations.

Safety
Safety regulations for the method of operation
2
15 | 124
Building Technologies
A6V10421795_en
--
_g
Fire safety
2016
-
11
-
18
CAUTION
Noncompliance with the following safety regulations
Risk of injury to persons and damage to property
●
Compliance with the following regulations is required.
●Specialist electrical engineering knowledge is required for installation.
●Only an expert is permitted to carry out installation work.
Incorrect installation can take safety devices out of operation unbeknown to a
layperson.
Mounting, installation, commissioning and maintenance
●If you require tools such as a ladder, these must be safe and must be intended
for the work in hand.
●When starting the fire control panel ensure that unstable conditions cannot
arise.
●Ensure that all points listed in the 'Testing the product operability' section below
are observed.
●You may only set controls to normal function when the product operability has
been completely tested and the system has been handed over to the customer.
Testing the product operability
●Prevent the remote transmission from triggering erroneously.
●If testing building installations or activating devices from third-party companies,
you must collaborate with the people appointed.
●The activation of fire control installations for test purposes must not cause
injury to anyone or damage to the building installations. The following
instructions must be observed:
–Use the correct potential for activation; this is generally the potential of the
building installation.
–Only check controls up to the interface (relay with blocking option).
–Make sure that only the controls to be tested are activated.
●Inform people before testing the alarm devices and allow for possible panic
responses.
●Inform people about any noise or mist which may be produced.
●Before testing the remote transmission, inform the corresponding alarm and
fault signal receiving stations.
Modifications to the system design and the products
Modifications to the system and to individual products may lead to faults,
malfunctioning and safety risks. Written confirmation must be obtained from
Siemens and the corresponding safety bodies for modifications or additions.
Modules and spare parts
●Components and spare parts must comply with the technical specifications
defined by Siemens. Only use products specified or recommended by
Siemens.
●Only use fuses with the specified fuse characteristics.

Safety
Release notes
2
16 | 124
Building Technologies
A6V10421795_en
--
_g
Fire safety
2016
-
11
-
18
●Wrong battery types and improper battery changing lead to a risk of explosion.
Only use the same battery type or an equivalent battery type recommended by
Siemens.
●Batteries must be disposed of in an environmentally friendly manner. Observe
national guidelines and regulations.
Disregard of the safety regulations
Before they are delivered, Siemens products are tested to ensure they function
correctly when used properly. Siemens disclaims all liability for damage or injuries
caused by the incorrect application of the instructions or the disregard of danger
warnings contained in the documentation. This applies in particular to the following
damage:
●Personal injuries or damage to property caused by improper use and incorrect
application
●Personal injuries or damage to property caused by disregarding safety
instructions in the documentation or on the product
●Personal injury or damage to property caused by poor maintenance or lack of
maintenance
2.4 Release notes
Limitations to the configuration or use of devices in a fire detection installation with
a particular firmware version are possible.
WARNING
Limited or non
-
existent fire detection
Personal injury and damage to property in the event of a fire.
●Read the 'Release Notes' before you plan and/or configure a fire detection
installation.
●Read the 'Release Notes' before you carry out a firmware update to a fire
detection installation.
NOTICE
Incorrect planning and/or configuration
Important standards and specifications are not satisfied.
Fire detection installation is not accepted for commissioning.
Additional expense resulting from necessary new planning and/or configuration.
●Read the 'Release Notes' before you plan and/or configure a fire detection
installation.
●Read the 'Release Notes' before you carry out a firmware update to a fire
detection installation.

Sa
fety
Cyber security disclaimer
2
17 | 124
Building Technologies
A6V10421795_en
--
_g
Fire safety
2016
-
11
-
18
2.5 Cyber security disclaimer
Products, solutions and services from Siemens include security functions to ensure
the secure operation of building automation and control, fire safety, security
management, and physical security systems. The security functions on these
products, solutions and services are important components of a comprehensive
security concept. Drafting, implementing and managing a comprehensive and up-
to-date security concept, customized to individual needs, is nevertheless
necessary, and may result in additional plant- or site-specific preventive measures
to ensure secure operation of your site regarding building automation and control,
fire safety, security management, and physical security. These measures may
include, for example, separating networks, physically protecting system
components, user training, multi-level defensive measures, etc. For additional
information on security as part of building technology and our product, solution and
service offerings, please contact your Siemens sales representative or project
department. We strongly recommend to always comply with our security advisories
on the latest security threats, patches and other related measures.
http://www.siemens.com/cert/en/cert-security-advisories.htm

System description
System overview
3
18 | 124
Building Technologies
A6V10421795_en
--
_g
Fire safety
2016
-
11
-
18
3System description
3.1 System overview
The panel is a compact panel with an integrated operating unit for processing
signals from FD720 devices. See list of compatibility A6V10882301 in chapter
'Applicable documents [➙9]'.
The panel is operated as standalone control panel.
The panel supports operation of the C-NET detector line in a loop or stub.
Automatic fire detectors (e.g. smoke and heat detectors), manual call points, I/O
modules and other C-NET devices are connected to the C-NET detector line.
The picture below shows the FC360 system overview.
Figure 1: Overview of FC360 system
1Fire control panel FC361-xx
2C-NET detector line
3Sounders, RT fire, RT fault, Fire controls, configurable IOs
4FC360 configuration tools (i.e.,'FC360 Panel Configurator', 'FC360 Desktop
Editor') for configuration via PC
C-NET
1
4
2
3

System description
Features
3
19 | 124
Building Technologies
A6V10421795_en
--
_g
Fire safety
2016
-
11
-
18
3.2 Features
System
●Monitors detector and sounder lines
●Up to 126 addresses per loop
●LCD with 7 lines, max. 21 characters per line
●Up to 2000 events can be stored in history log with date and time stamp
●Alarm counter for up to 999 alarms
●Integrated configuration tool 'FC360 Panel Configurator'
●Automatic summer / winter time change
●Country specific settings
●Multilingual

System description
Panel types
3
20 | 124
Building Technologies
A6V10421795_en
--
_g
Fire safety
2016
-
11
-
18
3.3 Panel types
Overview of panels and options
FC361-ZZ FC361-ZA
batteries max. 2x 12 Ah
without LED indicator
batteries max. 2x 25 Ah
without LED indicator
FC361-YZ FC361-YA
batteries max. 2x 12 Ah
with LED indicator (16 zones)
batteries max. 2x 25 Ah
with LED indicator (16 zones)
More options
●Output card (4M)
●Evacuation module (NL)
●LED indicator (16 zones)
●Key switch
●Key switch (Nordic)
●RS232 module
●Ext. printer DL3750+
●Output module FCA1209-Z1
●Semi flush mounting bezel