Siemens SIMATIC IPC627E User manual

___________________
___________________
___________________
___________________
___________________
___________________
___________________
___________________
___________________
___________________
___________________
___________________
___________________
SIMATIC
Industrial PC
SIMATIC IPC627E
Operating Instructions
12/2018
A5E44297201
-AA
Preface
Product description
1
Safety instructions
2
Installing and connecting the
device
3
Commissioning the device
4
Operating the device
5
Expanding and assigning
parameters to the device
6
Device maintenance and
repair
7
Technical specifications
8
Dimension drawings
9
Standards and approvals
10
Hardware description
A
Technical support
B
Markings and symbols
C
List of abbreviations
D

Siemens AG
Division Digital Factory
Postfach 48 48
90026 NÜRNBERG
GERMANY
A5E44297201-AA
Ⓟ
12/2018 Subject to change
Copyright © Siemens AG 2018.
All rights reserved
Legal information
Warning notice system
This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent
damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert
symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are
graded according to the degree of danger.
DANGER
indicates that death or severe personal injury will result if proper precautions are not taken.
WARNING
indicates that death or severe personal injury may result if proper precautions are not taken.
CAUTION
indicates that minor personal injury can result if proper precautions are not taken.
NOTICE
indicates that property damage can result if proper precautions are not taken.
If more than one degree of danger is present, the warning notice representing the highest degree of danger will
be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to
property damage.
Qualified Personnel
The product/system described in this documentation may be operated only by personnel qualified for the specific
task in accordance with the relevant documentation, in particular its warning notices and safety instructions.
Qualified personnel are those who, based on their training and experience, are capable of identifying risks and
avoiding potential hazards when working with these products/systems.
Proper use of Siemens products
Note the following:
WARNING
Siemens products may only be used for the applications described in the catalog and in the relevant technical
documentation. If products and components from other manufacturers are used, these must be recommended
or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and
maintenance are required to ensure that the products operate safely and without any problems. The permissible
ambient conditions must be complied with. The information in the relevant documentation must be observed.
Trademarks
All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication
may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.
Disclaimer of Liability
We have reviewed the contents of this publication to ensure consistency with the hardware and software
described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the
information in this publication is reviewed regularly and any necessary corrections are included in subsequent
editions.

SIMATIC IPC627E
Operating Instructions, 12/2018, A5E44297201-AA 3
Preface
Purpose of the operating instructions
These operating instructions contain all the information you need for the installation,
electrical connection, commissioning and expansion of the SIMATIC IPC627E and to
maintain and repair the device. They are intended for the following qualified specialist
personnel:
●Installation personnel
●Commissioning engineers
●IT administrators
●Service and maintenance personnel
Basic knowledge required
A solid background in electrical installation, personal computers, Microsoft operating
systems and network technology is required to understand this manual. General knowledge
in the field automation control engineering is recommended.
Scope of the operating instructions
These operating instructions are valid for all order versions of the SIMATIC IPC627E.
History
The following editions of these operating instructions have already been published:
Edition
Comment
12/2018
First edition
See also
Standards and approvals (Page 131)
Technical specifications (Page 109)

Preface
SIMATIC IPC627E
4Operating Instructions, 12/2018, A5E44297201-AA
Security information
Siemens provides products and solutions with industrial security functions that support the
secure operation of plants, systems, machines and networks.
In order to protect plants, systems, machines and networks against cyber threats, it is
necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial
security concept. Siemens' products and solutions constitute one element of such a concept.
Customers are responsible for preventing unauthorized access to their plants, systems,
machines and networks. Such systems, machines and components should only be
connected to an enterprise network or the internet if and to the extent such a connection is
necessary and only when appropriate security measures (e.g. firewalls and/or network
segmentation) are in place.
For additional information on industrial security measures that may be implemented, please
visit (http://www.siemens.de/industrialsecurity).
Siemens' products and solutions undergo continuous development to make them more
secure. Siemens strongly recommends that product updates are applied as soon as they are
available and that the latest product versions are used. Use of product versions that are no
longer supported, and failure to apply the latest updates may increase customers' exposure
to cyber threats.
To stay informed about product updates, subscribe to the Siemens Industrial Security RSS
Feed under (http://www.siemens.de/industrialsecurity).
Disclaimer for third-party software updates
This product includes third-party software. Siemens AG only provides a warranty for
updates/patches of the third-party software, if these have been distributed as part of a
Siemens software update service contract or officially released by Siemens AG. Otherwise,
updates/patches are undertaken at your own risk. You can find more information about our
Software Update Service offer on the Internet at Software Update Service
(http://www.automation.siemens.com/mcms/automation-software/en/software-update-
service).

SIMATIC IPC627E
Operating Instructions, 12/2018, A5E44297201-AA 5
Table of contents
Preface ...................................................................................................................................................... 3
1 Product description.................................................................................................................................. 11
1.1 Important instructions and manuals for operating the device.................................................11
1.2 Product highlights ...................................................................................................................13
1.3 Applications.............................................................................................................................15
1.4 External design of the device..................................................................................................16
1.4.1 Front panel..............................................................................................................................16
1.4.2 Rear of the device...................................................................................................................20
1.4.3 Status displays........................................................................................................................21
1.5 Internal design of the device...................................................................................................23
1.6 Accessories and spare parts ..................................................................................................24
1.6.1 Accessories: Hardware...........................................................................................................24
1.6.2 Accessories: Software ............................................................................................................25
2 Safety instructions ................................................................................................................................... 27
2.1 General safety instructions .....................................................................................................27
2.2 Note on transport and storage................................................................................................29
2.3 Notes on mounting..................................................................................................................30
2.4 Notes on ambient and environmental conditions....................................................................30
2.5 Information on I/O devices......................................................................................................33
2.6 Notes on device and system extensions ................................................................................34
3 Installing and connecting the device ........................................................................................................ 35
3.1 Preparing for installation .........................................................................................................35
3.1.1 Scope of delivery ....................................................................................................................35
3.1.2 Checking the delivery package...............................................................................................37
3.1.3 Identification data of the device ..............................................................................................38
3.2 Installing the device ................................................................................................................39
3.2.1 Installation guidelines .............................................................................................................39
3.2.2 Mounting positions..................................................................................................................41
3.2.3 Installation of the device with wall mounting rails...................................................................42
3.2.4 Installing the device with the vertical mounting kit..................................................................43
3.2.5 Installing the device with the vertical mounting kit for PC port access from the front ............44
3.3 Connecting the device ............................................................................................................45
3.3.1 Country-specific information on supply voltage......................................................................45
3.3.2 Connection of equipotential-bonding cable ............................................................................46

Table of contents
SIMATIC IPC627E
6Operating Instructions, 12/2018, A5E44297201-AA
3.3.3 Connecting the power supply................................................................................................. 47
3.3.3.1 Connecting 100-240 VAC power supply................................................................................ 47
3.3.3.2 Connecting the 24 VDC power supply................................................................................... 49
3.3.4 Connecting I/O devices.......................................................................................................... 51
3.3.5 Connecting the device to networks........................................................................................ 53
3.3.6 Connecting Ethernet/USB strain relief ................................................................................... 54
4 Commissioning the device....................................................................................................................... 55
4.1 Switching on the device ......................................................................................................... 55
4.2 Configuring automatic switch-on of device ............................................................................ 55
4.3 Switching off the device ......................................................................................................... 56
5 Operating the device................................................................................................................................ 59
5.1 Multi-monitoring...................................................................................................................... 59
5.2 Drive configurations ............................................................................................................... 59
5.2.1 RAID1 system ........................................................................................................................ 59
5.3 Operating RAID systems ....................................................................................................... 60
5.3.1 Display of a defective drive of a RAID system....................................................................... 60
5.3.2 RAID1 system: Installation options for drives ........................................................................ 60
5.3.3 Configure the onboard RAID system ..................................................................................... 60
5.3.4 Monitoring the onboard RAID system with "Intel® Rapid Storage Technology" ................... 62
5.3.5 Integrating a new drive into the onboard RAID system ......................................................... 63
5.3.6 Data synchronization in the RAID system ............................................................................. 64
5.4 Monitoring of the device......................................................................................................... 65
5.4.1 Monitoring functions............................................................................................................... 65
5.4.2 SIMATIC IPC DiagBase......................................................................................................... 66
5.4.3 SIMATIC IPC DiagMonitor ..................................................................................................... 66
5.5 Remote maintenance of the device ....................................................................................... 67
5.5.1 Remote maintenance functions ............................................................................................. 67
5.5.2 SIMATIC IPC Remote Manager............................................................................................. 68
5.6 Trusted Platform Module (TPM)............................................................................................. 69
5.7 Buffer memory NVRAM (optional) ......................................................................................... 69
5.8 Operation without monitor and keyboard............................................................................... 69
6 Expanding and assigning parameters to the device................................................................................. 71
6.1 Opening the Device ............................................................................................................... 71
6.2 Expansion cards .................................................................................................................... 73
6.2.1 Usable expansion cards......................................................................................................... 73
6.2.2 Installing/removing expansion cards...................................................................................... 74
6.3 Memory modules.................................................................................................................... 76
6.3.1 Usable memory modules ....................................................................................................... 76
6.3.2 Installing and removing memory module............................................................................... 77

Table of contents
SIMATIC IPC627E
Operating Instructions, 12/2018, A5E44297201-AA 7
6.4 Drives......................................................................................................................................79
6.4.1 Changing the drive in the removable tray...............................................................................79
6.4.2 Changing internal SSD ...........................................................................................................81
6.4.3 Changing internal hard disk drive ...........................................................................................84
6.4.4 Replacing a drive in the RAID system ....................................................................................86
6.4.5 Replacing M.2 NVMe SSD .....................................................................................................87
7 Device maintenance and repair ............................................................................................................... 89
7.1 Repair information...................................................................................................................89
7.2 Maintenance intervals.............................................................................................................89
7.3 Removing and installing hardware..........................................................................................90
7.3.1 Replacing device fans.............................................................................................................90
7.3.2 Replace power supply fan ......................................................................................................93
7.3.3 Changing the backup battery..................................................................................................96
7.3.4 Replace power supply ............................................................................................................98
7.3.5 Replacing the bus board.......................................................................................................100
7.3.6 Replacing the processor .......................................................................................................104
7.4 Installing operating system, software and drivers.................................................................107
7.4.1 Installing the operating system .............................................................................................107
7.4.2 Installing software and drivers ..............................................................................................107
7.5 Configuring firmware/BIOS ...................................................................................................107
7.6 Backing up data and changing partitions..............................................................................107
7.7 Recycling and disposal .........................................................................................................108
8 Technical specifications......................................................................................................................... 109
8.1 Applicability of technical specifications.................................................................................109
8.2 General technical specifications ...........................................................................................109
8.3 Current/power requirements and power supply....................................................................111
8.3.1 Current and power requirements of the system components...............................................111
8.3.2 Technical specifications AC power supply (AC)...................................................................113
8.3.3 Technical specifications DC power supply (DC)...................................................................114
8.4 Electromagnetic compatibility ...............................................................................................115
8.5 Ambient conditions................................................................................................................116
8.6 Technical specifications of the drives ...................................................................................116
8.7 Technical specifications of the motherboard ........................................................................117
8.8 Technical specifications of graphic.......................................................................................118
8.9 Technical specifications of the interfaces .............................................................................118
8.10 Technical specifications of the operating systems ...............................................................119

Table of contents
SIMATIC IPC627E
8Operating Instructions, 12/2018, A5E44297201-AA
9 Dimension drawings .............................................................................................................................. 121
9.1 Dimension drawings of SIMATIC IPC627E (2 expansion slots).......................................... 121
9.2 Dimension drawings of SIMATIC IPC627E (5 expansion slots) .......................................... 125
9.3 Dimension drawing of the expansion cards......................................................................... 129
10 Standards and approvals....................................................................................................................... 131
10.1 CE marking .......................................................................................................................... 131
10.2 DIN ISO 9001 certificate and software license agreements ................................................ 132
10.3 UL approval.......................................................................................................................... 132
10.4 FCC (USA)........................................................................................................................... 133
10.5 Canada................................................................................................................................. 134
10.6 Australia / New Zealand....................................................................................................... 134
10.7 Eurasion Customs Union EAC............................................................................................. 134
10.8 Korea.................................................................................................................................... 134
A Hardware description............................................................................................................................. 135
A.1 Motherboard......................................................................................................................... 135
A.1.1 Layout of the motherboard................................................................................................... 135
A.1.2 Position of the interfaces on the motherboard..................................................................... 136
A.2 Internal interfaces ................................................................................................................ 137
A.2.1 Pin assignment of the internal interfaces............................................................................. 137
A.2.2 Device fan supply (X512)..................................................................................................... 137
A.2.3 Supply for the power supply fan (X515)............................................................................... 138
A.2.4 Supply for the serial ATA drives (X516 - X521)................................................................... 138
A.3 Bus board............................................................................................................................. 139
A.3.1 Expansion card slots on the bus board................................................................................ 139
A.3.2 Pin assignment 12 V power supply connection for expansion cards................................... 141
A.4 External interfaces ............................................................................................................... 142
A.5 System resources ................................................................................................................ 143
A.5.1 Currently allocated system resources.................................................................................. 143
A.5.2 I/O address allocation .......................................................................................................... 143
A.5.3 Interrupt Assignments .......................................................................................................... 146
A.5.4 Exclusive PCI hardware interrupt......................................................................................... 148
A.5.5 Memory address assignments............................................................................................. 149
B Technical support .................................................................................................................................. 151
B.1 Service and support............................................................................................................. 151
B.2 Troubleshooting ................................................................................................................... 152
B.2.1 Problems with device functions............................................................................................ 152
B.2.2 Problems when booting the device...................................................................................... 153
B.2.3 Problems with RAID systems............................................................................................... 154
B.2.4 Problems when using expansion cards ............................................................................... 154

Table of contents
SIMATIC IPC627E
Operating Instructions, 12/2018, A5E44297201-AA 9
C Markings and symbols ........................................................................................................................... 155
C.1 Overview ...............................................................................................................................155
C.2 Safety....................................................................................................................................155
C.3 Operator controls ..................................................................................................................155
C.4 Certificates, approvals and markings....................................................................................156
C.5 Interfaces ..............................................................................................................................157
D List of abbreviations............................................................................................................................... 159
D.1 Abbreviations ........................................................................................................................159
Index...................................................................................................................................................... 161

Table of contents
SIMATIC IPC627E
10 Operating Instructions, 12/2018, A5E44297201-AA

SIMATIC IPC627E
Operating Instructions, 12/2018, A5E44297201-AA 11
Product description
1
1.1 Important instructions and manuals for operating the device
Documentation
Contents
Source
Operating instructions •Product description
•Technical specifications
•Installation of the device
•Operation of the device
•Installing and removing hard-
ware
•Dimension drawings
•Supplied data storage medium
•Online at:
SIMATIC IPC Documentation
(http://www.siemens.com
/simatic-ipc-doku-portal)
Quick Install Guide Information on:
•Operating Instructions of the
device
•Installation of the device
•Steps for connecting the device
to the power supply
•Connecting I/O devices
•Switching the device on
•Supplied in printed form with the
device
•Supplied data storage medium
Current product infor-
mation
•Current notes on the device
•Changes compared with these
operating instructions
•Online at:
SIMATIC IPC Documentation
(http://www.siemens.com
/simatic-ipc-doku-portal)
Firmware/BIOS de-
scription
Information on:
•Important firmware settings
•Firmware settings in the factory
state
•Boot modes
•Supplied data storage medium
•Online at:
Firmware/BIOS description
(https://support.industry.siemens.
com/cs/ww/en/view/109760621)
Windows® operating
system
Information on:
•Commissioning the operating
system
•Restoring the operating system
•Configuration of the operating
system
•Supplied data storage medium
•Online at:
Microsoft® Windows® 10
(https://support.industry.siemens.
com/cs/ww/en/view/109749498)

Product description
1.1 Important instructions and manuals for operating the device
SIMATIC IPC627E
12 Operating Instructions, 12/2018, A5E44297201-AA
Documentation
Contents
Source
SIMATIC IPC Di-
agBase
Information on:
•Temperature monitoring
•Fan monitoring
•Monitoring drives
•Watchdog
•Operating hours counter
•Battery monitoring
•Supplied data storage medium
•Online at:
SIMATIC IPC DiagBase
(https://support.industry.siemens.
com/cs/ww/en/view/109749690)
SIMATIC IPC Diag-
Monitor
Monitoring functions such as with
SIMATIC IPC DiagBase with addi-
tional extended functions.
•Online at:
SIMATIC IPC DiagMonitor
(https://support.industry.siemens.
com/cs/ww/en/view/39129913)
SIMATIC IPC Remote
Manager
Information on:
•Remote maintenance of
SIMATIC industrial PCs (IPCs)
via a management PC
•Using Intel ®Active Management
Technology (Intel® AMT)
•Online at:
SIMATIC IPC Remote Manager
(http://support.automation
.siemens.com/WW/view/en
/48707158)
SIMATIC IPC Image &
Partition Creator
Information on:
•Backup and recovery of files,
directories, drive partitions.
•Online at:
SIMATIC IPC Image Partition
Creator
(https://support.industry.siemens.
com/cs/de/en/view/21766418)
SIMATIC NET Industrial communication •Online at:
SIMATIC NET
(http://w3.siemens.com/mcms/aut
omation/en/industrial-
communications/Pages
/Default.aspx)

Product description
1.2 Product highlights
SIMATIC IPC627E
Operating Instructions, 12/2018, A5E44297201-AA 13
1.2 Product highlights
The SIMATIC IPC627E is a powerful industrial PC. It is perfectly suited for PC applications
with high-level industry functionality.
Device view
Note
Depending on the configuration or
dered the features and illustrations described in this
manual may differ from the features of your device.
Maximum industrial compatibility for 24-hour continuous use in industrial environments
●Maximum processor power (in full configuration) without loss of power (throttling) at up to
55 °C ambient temperature
●Full metal enclosure with high electromagnetic compatibility (EMC) for use in industry
●Independent industrial product design for high shock and vibration resistance
●CE certification for industrial and office use

Product description
1.2 Product highlights
SIMATIC IPC627E
14 Operating Instructions, 12/2018, A5E44297201-AA
High productivity through fast data processing
●8th generation Intel® processors: Celeron, Core i3 and i7, up to 6 cores / 12 threads
●Graphics controller (630/P630) integrated in processor up to 4K Ultra HD resolution, three
independent graphic interfaces
●Maximum performance, e.g. through Intel C246 chip set, DDR4 memory (up to 64 GB)
with support of dual channel technology
●High data transfer rates, e.g. with PCI Express Gen 3 technology, USB 3.1 Gen 2
SuperSpeedPlus (SuperSpeed+) (10 Gbps), M.2 NVMe
●Low noise level due to variable-speed fans
High system availability thanks to minimization of standstill times
●Hot swap (swapping of drive during operation) in removable drive bays in RAID systems
●Efficient event diagnostics through the SIMATIC IPC DiagBase or DiagMonitor monitoring
software (optional) and signaling software OPC/SNMP/LAN
●Remote control and remote maintenance of the device through iAMT (Intel® Active
Management Technology)
●SSD as 2.5" SATA or M.2 NVMe
●Preventative data backup with the SIMATIC IPC Image & Partition Creator
High investment protection
●Platform with embedded Intel components for long-term stability
●Availability: 3 to 6 years
●Assured spare parts availability: 5 years after end of production
●Certified for worldwide marketing (cULus)
●Support of legacy interfaces (COM)
●Compatible installation across device generations
●Worldwide service and support
User-friendly application scenarios for commissioning, use and service
●High flexibility and expandability thanks to integrated interfaces and up to 5 slots (PCI and
PCI Express)
●Pre-installed and activated operating system
●Fast restoration of delivery state of the operating system (with supplied data storage
medium)
●Gbit LAN with teaming capability (3 x LAN 10/100/1000 Mbps connections)
●Service-friendly equipment design (modifications, service)
●Can be used flexibly in a wide variety of positions

Product description
1.3 Applications
SIMATIC IPC627E
Operating Instructions, 12/2018, A5E44297201-AA 15
1.3 Applications
The device offers industrial PC systems for high-performance and space-saving applications
in particular for manufacturers in the field of machine, plant and control cabinet engineering:
●Process and visualization applications
●Industrial image processing
●Quality assurance and monitoring tasks
●Measurement, control and rule-based tasks
●Data acquisition and management
The SIMATIC IPC has CE certification for use in the industrial sector as well as in residential
and commercial areas and small businesses. In addition to the industrial applications,
therefore, it can also be used in building automation or in public facilities.

Product description
1.4 External design of the device
SIMATIC IPC627E
16 Operating Instructions, 12/2018, A5E44297201-AA
1.4 External design of the device
1.4.1 Front panel
Device with two expansion slots
①
On/off button The on/off button has three functions:
•Switch on the PC: Briefly press once
•Shut down operating system and switch off PC: Briefly press once
•Switch off PC without shutting down the operating system (hardware reset): Press for
more than 4 seconds.
Note: The BIOS setup entry "State After G3" is preset to "S0 State (=Always On)". This
means the device is switched on with the on/off switch. You then do not need to press the
on/off button.
②
4 status LEDs
Status display of the operating state (Page 21)
③
COM1 X30
Serial interface
④
DVI/VGA X70
DVI-D connection for CRT or LCD monitor with DVI port
⑤
DisplayPort
X71/X72
DisplayPort connection for digital monitor
⑥
3 × Ethernet
X1P1/X2P1/X3P1
•X1P1, left: RJ45 Ethernet port 1 (exclusive PCI interrupt) with 10/100/1000 Mbps, iAMT
capable
•X2P1, center: RJ45 Ethernet port 2 (shared PCI interrupt) with 10/100/1000 Mbps
•X3PI, right: RJ45 Ethernet port 3 (shared PCI interrupt) with 10/100/1000 Mbps
⑦
2 × USB
X61/X63
USB 3.1 Gen. 2 Type C high current, backward compatible with USB 3.0/2.0/1.1

Product description
1.4 External design of the device
SIMATIC IPC627E
Operating Instructions, 12/2018, A5E44297201-AA 17
⑧
2 × USB
X60/X62
USB 3.1 Gen. 2 Type A high current, backward compatible with USB 3.0/2.0/1.1
⑨
2 × USB
X64/X65
USB 3.1 Gen. 2 Type A high current, backward compatible with USB 3.0/2.0/1.1
⑩
100-240 V AC
Power supply connection
⑪
On/off switch You switch on the device with the on/off switch. This requires that the BIOS setup entry
"State After G3" is set to "S0 State (=Always On)".
The on/off switch does not isolate the device from the power supply. Position "ON", when
the "-)" symbol is pressed inward on the device. Position "OFF" is the delivery state.
⑫
PCI/PCIe expansion
cards,
USB on expansion
card (optional)
2 slots for expansion cards (Slot1/X101, Slot2/X102)
⑬
Fixing screws for strain
relief

Product description
1.4 External design of the device
SIMATIC IPC627E
18 Operating Instructions, 12/2018, A5E44297201-AA
Device with five expansion slots
①
On/off button The on/off button has three functions:
•Switch on the PC: Briefly press once
•Shut down operating system and switch off PC: Briefly press once
•Switch off PC without shutting down the operating system (hardware reset): Press for
more than 4 seconds.
Note: The BIOS setup entry "State After G3" is preset to "S0 State (=Always On)". This
means the device is switched on with the on/off switch. You then do not need to press the
on/off button.
②
4 status LEDs
Status display of the operating state (Page 21)
③
COM1 X30
Serial interface
④
DVI/VGA X70
DVI-D connection for CRT or LCD monitor with DVI port
⑤
DisplayPort
X71/X72
DisplayPort connection for digital monitor
⑥
3 × Ethernet
X1P1/X2P1/X3P1
•X1P1, left: RJ45 Ethernet port 1 (exclusive PCI interrupt) with 10/100/1000 Mbps, iAMT
capable
•X2P1, center: RJ45 Ethernet port 2 (shared PCI interrupt) with 10/100/1000 Mbps
•X3PI, right: RJ45 Ethernet port 3 (shared PCI interrupt) with 10/100/1000 Mbps
⑦
2 × USB
X61/X63
USB 3.1 Gen. 2 Type C high current, backward compatible with USB 3.0/2.0/1.1
⑧
2 × USB
X60/X62
USB 3.1 Gen. 2 Type A high current, backward compatible with USB 3.0/2.0/1.1

Product description
1.4 External design of the device
SIMATIC IPC627E
Operating Instructions, 12/2018, A5E44297201-AA 19
⑨
2 × USB
X64/X65
USB 3.1 Gen. 2 Type A high current, backward compatible with USB 3.0/2.0/1.1
⑩
24 V DC
Power supply connection
⑪
On/off switch You switch on the device with the on/off switch. This requires that the BIOS setup entry
"State After G3" is set to "S0 State (=Always On)".
The on/off switch does not isolate the device from the power supply. Position "ON", when
the "-)" symbol is pressed inward on the device. Position "OFF" is the delivery state.
⑫
PCI/PCIe expansion
cards,
USB on expansion
card (optional)
5 slots for expansion cards (Slot1/X101, Slot2/X102, Slot3/X103, Slot4/X104, Slot5/X105)
⑬
Fixing screws for strain
relief
Device with USB expansion (optional)
The following expansion cards are located at the position of the cover ⑫in the figure above:
①
USB
X66, X67

Product description
1.4 External design of the device
SIMATIC IPC627E
20 Operating Instructions, 12/2018, A5E44297201-AA
1.4.2 Rear of the device
①
Removable drives
Slots for removable d
rives
②
RAID status indicators
HDD alarm
③
Battery compartment
CMOS backup battery
④
Fan