Siemens FS20 Guide

FS20
Fire detection system
Mounting
Installation
MP6
008851_s_en_--
Building Technologies
2016-01-27 Control Products and Systems

Legal notice
2 | 354
Building Technologies
008851_s_en_
--
Fire Safety
2016
-
01
-
27
Legal notice
Technical specifications and availability subject to change without notice.
Transmittal, reproduction, dissemination and/or editing of this document as well as
utilization of its contents and communication thereof to others without express
authorization are prohibited. Offenders will be held liable for payment of damages.
All rights created by patent grant or registration of a utility model or design patent
are reserved.
Issued by:
Siemens Switzerland Ltd.
Building Technologies Division
International Headquarters
Gubelstrasse 22
CH-6301 Zug
Tel. [phone]
www.siemens.com/buildingtechnologies
Edition: 2016-01-27
Document ID: 008851_s_en_--
© Siemens Switzerland Ltd, 2006

3 | 354
Building Technologies
008851_s_en_
--
Fire Safety
2016
-
01
-
27
Table of contents
1About this document .............................................................................9
1.1 Applicable documents................................................................................11
1.2 Download center........................................................................................11
1.3 Technical terms and abbreviations.............................................................11
1.4 Revision history .........................................................................................12
2Safety ............................................................................................... 15
2.1 Safety instructions .....................................................................................15
2.2 Safety regulations for the method of operation ...........................................17
2.3 Standards and directives complied with......................................................19
2.3.1 CPR conformity and firmware version .........................................19
2.4 Release Notes...........................................................................................20
3Setup of the compact control panels ..................................................... 21
3.1 Packaging units .........................................................................................21
3.2 Station rear panels (packaging unit)...........................................................21
3.2.1 Rear panel in Eco housing ..........................................................22
3.2.2 Rear panel in Standard housing ..................................................23
3.2.3 Rear panel in Comfort housing....................................................24
3.2.4 Rear panel in Comfort housing FC2030.......................................26
3.2.5 Rear panel in Large housing .......................................................28
3.2.6 Mounting material .......................................................................30
3.3 Rear panels version [CH]...........................................................................31
3.3.1 Eco rear panel of the FT2040-CZ ................................................31
3.3.2 Standard rear panel for FC2020-CZ ............................................32
3.3.3 Comfort rear panel of the FC2020-CC.........................................33
3.3.4 Comfort rear panel of the FC2030-CC.........................................35
3.3.5 Comfort rear panel of the FC2040-CC.........................................37
3.4 Operating unit, operating add-on and cover cap (packaging unit) ...............39
3.4.1 Operating units and operating add-on .........................................39
3.4.2 Cover cap ...................................................................................40
3.5 Location of components.............................................................................41
3.5.1 Eco housing (fire terminal) ..........................................................41
3.5.2 Standard housing (fire control panels).........................................42
3.5.3 Comfort housing (fire control panels)...........................................43
3.5.4 Large housing (fire control panels) ..............................................45
3.5.5 Operating unit .............................................................................46
3.5.6 Position of modules for extended networking...............................47
4Setup of FC2080 ................................................................................ 52
4.1 Packaging units .........................................................................................52
4.2 Location of components.............................................................................53
4.3 Setup with one power supply group (sample).............................................55
4.4 Setup with two power supply groups (sample)............................................56
4.5 Optional operating units and operating add-ons .........................................58

Building Technologies
008851_s_en_
--
Fire Safety
2016
-
01
-
27
4 | 354
5Mounting and installation of the compact control panels...........................59
5.1 Mounting procedure...................................................................................59
5.2 Mounting and assembling a station............................................................61
5.2.1 Install rear panel .........................................................................61
5.2.2 Installing an additional housing ...................................................62
5.2.3 Connect the mains cable.............................................................64
5.2.4 Installing the operating unit and the operating add-on..................68
5.2.5 Mounting the cover cap...............................................................73
5.3 Periphery board (2-loop) ............................................................................74
5.3.1 Installation ..................................................................................74
5.3.2 Pin assignments .........................................................................75
5.4 Periphery board (4 loops) ..........................................................................81
5.4.1 Installation ..................................................................................81
5.4.2 Pin assignments .........................................................................82
5.5 Fire terminal board ....................................................................................88
5.5.1 Installation ..................................................................................88
5.5.2 Pin assignments .........................................................................90
5.6 Power supply (70 W) .................................................................................94
5.6.1 Installation ..................................................................................95
5.6.2 Pin assignments .........................................................................96
5.7 Power supply (150 W) ...............................................................................98
5.7.1 Installation ..................................................................................98
5.7.2 Fitting an additional power supply (150 W)................................101
5.7.3 Pin assignments version A4......................................................103
5.7.4 Pin assignments version A5......................................................106
5.8 Battery kit (9 V) [FR] ................................................................................113
5.8.1 Installation in the Eco and Standard housings ...........................113
5.8.2 Installation in Comfort housing ..................................................114
5.8.3 Pin assignments .......................................................................114
5.9 Shield connection terminal blocks [DE] ....................................................115
5.10 Loop extension ........................................................................................116
5.10.1 Installation ................................................................................116
5.10.2 Pin assignments .......................................................................117
5.11 Relay module ..........................................................................................119
5.12 Mounting plate.........................................................................................120
5.12.1 Install mounting plate................................................................120
5.12.2 Installation of the mounting plate in the Large housing ..............122
5.13 Fire brigade periphery module [DE]..........................................................124
5.13.1 Installation ................................................................................124
5.13.2 Pin assignments .......................................................................126
5.14 Network module (SAFEDLINK)................................................................131
5.14.1 Installation ................................................................................131
5.14.2 Pin assignments .......................................................................133
5.15 Installing the fiber optic cable network module .........................................134
5.15.1 Replacing the DIN rail clip.........................................................134
5.15.2 Installation variants ...................................................................135
5.15.3 Pin assignments .......................................................................136

5 | 354
Building Technologies
008851_s_en_
--
Fire Safety
2016
-
01
-
27
5.16 Installing an Ethernet switch (modular) FN2012 .......................................142
5.16.1 Installation of Ethernet modules ................................................142
5.16.2 DIN rail clip mounting................................................................143
5.16.3 Installing mounting kit FHA2029................................................144
5.16.4 Installing Ethernet switch FN2012 .............................................150
5.16.5 Wiring .......................................................................................154
5.16.6 Pin assignments .......................................................................156
5.17 Connection module (card cage) ...............................................................158
5.17.1 Installation ................................................................................158
5.18 Card cage................................................................................................159
5.18.1 Installation ................................................................................159
5.18.2 Pin assignment of the card cage (2 slots)..................................161
5.18.3 Pin assignment of the card cage (5 slots)..................................163
5.19 Module bus cards ....................................................................................166
5.19.1 Installation ................................................................................166
5.19.2 Pin assignments .......................................................................167
5.20 RS232 / RS485 module ...........................................................................185
5.20.1 Installation ................................................................................185
5.20.2 Pin assignments .......................................................................187
5.21 Event printer............................................................................................189
5.21.1 Installation ................................................................................189
5.21.2 Pin assignments .......................................................................191
5.22 Key switch (Kaba) FTO2005-C1...............................................................194
5.23 Redux module [DE]..................................................................................195
5.23.1 Installation ................................................................................195
5.23.2 Pin assignments .......................................................................196
5.24 Input/output module FDCIO224 [DE]........................................................197
5.24.1 Installation ................................................................................197
5.25 Sounder module ......................................................................................198
5.25.1 Installation ................................................................................198
5.25.2 Pin assignments .......................................................................199
5.26 Modes of mounting for modules ...............................................................202
5.26.1 Mounting on DIN rail or mounting plate......................................203
5.26.2 Mounting in housing FDCH221 .................................................204
5.27 RT interface [NL] .....................................................................................205
5.27.1 Installation ................................................................................205
5.27.2 Pin assignments .......................................................................207
5.28 RT interface [CH].....................................................................................212
5.28.1 Installation ................................................................................212
5.28.2 Pin assignments .......................................................................213
5.29 Cable kit (communication)........................................................................216
5.30 Insert license key.....................................................................................217
5.31 19" mounting kit.......................................................................................218
5.32 FM blind ..................................................................................................220
5.33 Batteries..................................................................................................223
5.34 Operating add-on with 20 zones EVAC-NL [NL] .......................................224
5.34.1 Adjustment elements.................................................................226

Building Technologies
008851_s_en_
--
Fire Safety
2016
-
01
-
27
6 | 354
5.35 Remote EVAC-NL and EVAC-NL mimic display driver .............................228
5.35.1 Remote 20-zone EVAC-NL indicator .........................................228
5.35.2 Fitting the EVAC-NL mimic display driver FT2003-N1................229
5.35.3 Pin assignments .......................................................................231
5.35.4 Cable length and cable resistance.............................................233
5.35.5 Indicators..................................................................................235
5.35.6 Connection FTI2002-N1............................................................236
5.35.7 Connection FTO2007-N1 ..........................................................243
5.36 Door contact kit [DE]................................................................................244
5.36.1 Installation ................................................................................244
5.36.2 Pin assignments .......................................................................245
5.37 Ethernet switch FN2008 and safety module FN2009................................246
5.37.1 Installing the mounting kit..........................................................246
5.37.2 Installing the modules ...............................................................251
5.37.3 Wiring of FN2008 with fire terminal............................................252
5.37.4 Connecting the Ethernet switch.................................................255
5.37.5 Connecting the safety module FN2009......................................257
5.37.6 Modifications to the modules for class B....................................258
5.38 Installation checklist.................................................................................260
6Mounting and installation FC2080 .......................................................262
6.1 Mounting procedure.................................................................................262
6.2 Processor unit (19", FC2080)...................................................................264
6.2.1 Installation ................................................................................265
6.2.2 View of card cage (CPU) FCC2003-A1 .....................................266
6.2.3 Pin assignments .......................................................................268
6.3 Assembling the carrier (19", card cage)....................................................271
6.3.1 Installing the card cage (5 slots) on the carrier (19", card cage) .272
6.3.2 Installing DIN rails on the carrier (19", card cage)......................273
6.4 Installing the carrier (19", card cage)........................................................274
6.4.1 Installation ................................................................................274
6.4.2 Views of card cage (5 slots) ......................................................275
6.4.3 Pin assignments .......................................................................276
6.5 Installing the carrier (19", option)..............................................................278
6.6 Installing the battery tray (19") .................................................................279
6.7 Installing the switch and socket on the carrier (19", power supply)............281
6.8 Installing the power supply kit (150 W, B).................................................282
6.8.1 Installation ................................................................................282
6.8.2 Parallel connection of three power supplies (150 W) .................284
6.8.3 Wiring .......................................................................................285
6.9 Installing the carrier (19", power supply)...................................................288
6.9.1 Wiring up the mains voltage......................................................291
6.9.2 Installing the temperature sensor ..............................................294
6.10 Wiring up the system supply and module bus...........................................296

7 | 354
Building Technologies
008851_s_en_
--
Fire Safety
2016
-
01
-
27
6.11 Installing the CPU card and communication card .....................................304
6.11.1 Installation in card cage ............................................................304
6.11.2 Switching the network module with dual CPU operation ............306
6.11.3 Ethernet connection ..................................................................307
6.12 Insert license key.....................................................................................308
6.13 Installing the operating unit and operating add-on ....................................309
6.13.1 Installation ................................................................................309
6.13.2 Wiring .......................................................................................312
6.14 Installing the key safe adapter [DE]..........................................................313
6.14.1 Installation on the carrier (19", option) .......................................313
6.14.2 Installation on the side wall .......................................................314
6.14.3 SDA wiring via I/O module and FDnet control............................316
6.14.4 SDA wiring via I/O module FDCIO222.......................................318
6.14.5 SDA wiring via an I/O card ........................................................320
6.15 Installing the fiber optic cable network module .........................................322
6.15.1 Installation ................................................................................322
6.16 Installing an Ethernet switch (MM) FN2008 ..............................................323
6.16.1 Installation ................................................................................323
6.17 Installing an Ethernet switch (modular) FN2012 .......................................324
6.17.1 FHA2029 in the housing (19", pedestal housing) .......................324
6.17.2 FN2012 in station with housing (19", pedestal housing) .............325
6.18 Installing the battery kit (9 V) [FR] ............................................................326
6.18.1 Installation ................................................................................326
6.18.2 Wiring .......................................................................................326
6.19 Install batteries ........................................................................................327
7Mounting and installation of fire terminal (Touch).................................. 329
7.1 Setup of fire terminal (Touch) FT2080......................................................329
7.2 Installation in 19" pedestal housing of the FC2080 ...................................331
7.3 Installation in housing (standard)..............................................................334
7.4 Installation in rear panel (FT2080) FHA2039............................................335
7.5 Installation in desktop housing (FT2080) FHA2040 ..................................340
8Replacing components...................................................................... 346
9Concluding work............................................................................... 347
9.1 Insert printing paper.................................................................................347
Glossary................................................................................................... 351
Index ...................................................................................................... 352

Building Technologies
008851_s_en_
--
Fire Safety
2016
-
01
-
27
8 | 354

About this document
Applicable documents
1
9 |
354
Building Technologies
008851_s_en_
--
Fire Safety
2016
-
01
-
27
1About this document
Goal and purpose
This document describes the installation process for the stations and components
of the FS20fire detection system. It especially provides information on the
following:
●Mounting of the stations
●Mounting of the individual components
●Assembly of the stations
The document 008836 System description contains the overview of the structure
and function of the fire detection system and of the structure of the documentation.
Document 008837 Product data contains the detailed technical description for the
components of the FS20 fire detection system.
You will find information about assembling and installing the gateway (SIGMANET)
and the associated components in the Gateway (SIGMANET) Technical Manual
A6V10281424.
Scope
The information contained in this document is valid for market package MP6.
The document also contains information on country-specific components. Country-
specific components are marked with square brackets, e.g. [DE]. It may be the
case that these cannot be used in your country.
Target groups
The information in this document is intended for the following target groups:
Target group Activity Qualification
Installation personnel ●Assembles and installs the product
components at the place of
installation.
●Carries out a function check
following installation.
●Has received specialist training in
the area of building installation
technology or electrical installations.
Commissioning personnel ●Configure the product at the place
of installation according to
customer-specific requirements.
●Check the product operability and
release the product for use by the
operator.
●Searches for and corrects
malfunctions.
●Has obtained suitable specialist
training for the function and for the
products.
●Has attended the training courses
for commissioning personnel.
Maintenance personnel ●Carries out all maintenance work.
●Checks that the products are in
perfect working order.
●Searches for and corrects
malfunctions.
●Has obtained suitable specialist
training for the function and for the
products.

About this document
Applicable documents
1
10 | 354
Building Technologies
008851_s_en_
--
Fire Safety
2016
-
01
-
27
Source language and reference document
●The source/original language of this document is German (de).
●The reference version of this document is the international version in English.
The international version is not localized.
Document identification
The document ID is structured as follows:
ID code Examples
ID_ModificationIndex_Language_COUNTRY
-- = multilingual or international
A6V10215123_a_de_DE
A6V10215123_a_en_--
A6V10315123_a_--_--
Date format
The date format in the document corresponds to the recommendation of
international standard ISO 8601 (format YYYY-MM-DD).
Conventions for text marking
Markups
Special markups are shown in this document as follows:
⊳Requirement for a behavior instruction
1.
2.
Behavior instruction with at least two operation sequences
– Version, option, or detailed information for a behavior instruction
⇨Intermediate result of a behavior instruction
⇨End result of a behavior instruction
●Numbered lists and behavior instructions with an operation
sequence
[➙ X] Reference to a page number
'Text' Quotation, reproduced identically
<Key> Identification of keys
>Relation sign and for identification between steps in a sequence,
e.g., 'Menu bar' > 'Help' > 'Help topics'
↑Text Identification of a glossary entry
Supplementary information and tips
The 'i' symbol identifies supplementary information and tips for an easier way of
working.

About this document
Applicable documents
1
11 |
354
Building Technologies
008851_s_en_
--
Fire Safety
2016
-
01
-
27
1.1 Applicable documents
Document ID Title
008836 FS20 Fire Detection System System Description
008837 FS20 Fire Detection System Product Data
009052 FS20 Fire Detection System, Commissioning,
Maintenance, Troubleshooting
A6V10281424 Technical manual FG2020
1.2 Download center
You can download various types of documents, such as data sheets, installation
instructions, and license texts via the following Internet address:
http://siemens.com/bt/download
lEnter the document ID in the 'Find by keyword' input box.
You will also find information about search variants and links to mobile
applications (apps) for various systems on the home page.
1.3 Technical terms and abbreviations
You will find details of technical terms and abbreviations in the 'Glossary' chapter.
See also
2Applicable documents [➙11]

About this document
Revision history
1
12 | 354
Building Technologies
008851_s_en_
--
Fire Safety
2016
-
01
-
27
1.4 Revision history
The reference document's version applies to all languages into which the reference
document is translated.
The first edition of a language ve
rsion or a country variant may, for example, be
version 'd' instead of 'a' if the reference document is already this version.
The table below shows this document's revision history:
Version Edition date Brief description
s 2016-01-27 Corrections and additions:
Chapter 'Mounting and installation FC2080' – 'Wiring up the system supply and
module bus': Pin assignments of the optocouplers K1 and K2 modified.
r 2015-12-15 Edition for MP6
New:
●'Installing an Ethernet switch (modular) FN2012' in 'Mounting and installation
of the compact control panels' and 'Mounting and installation FC2080'
●Pin assignment for power supply (70 W) FP2015 inserted
Corrections and additions:
●Chapter 'Installing mounting kits' adapted for FN2008 and FN2009
●Referenced documents updated
●Chapter 'Mounting and installation of fire terminal (Touch)': Mounting of mains
filter removed, mounting of desktop housing (FT2080) modified, installation in
wall housing changed to housing (Standard)
●Chapter 'Insert license key' updated
●Notice about ground fault monitoring incorporated into chapter 'Mounting and
installation FC2080' – 'Installing the operating unit and operating add-on'
●Chapter 'Mounting and installation of the compact control panels' – 'Event
printer' – 'Connection on printer side' product version 02 integrated
●Chapter 'Mounting and installation FC2080' – 'Wiring up the system supply
and module bus', 0 V connection inserted between PSU1 and PSU2 to
guarantee ground fault monitoring, relay wiring K1 and K2 replaced by
optocoupler
●Chapter 'RS232/RS485 module'; cable gland on operating unit removed. All
corresponding graphics revised
●Chapter 'Mounting and installation FC2080' – 'Installing the key safe adapter
[DE]': Wiring drawings modified
q2014-02-10 Information on voltage ranges revised in relation to supply outputs for fire terminal
board

About this document
Revision history
1
13 |
354
Building Technologies
008851_s_en_
--
Fire Safety
2016
-
01
-
27
Version Edition date Brief description
p 2013-11-14 Edition for MP5
Change to date format according to ISO 8601
New:
Mounting and installation of fire terminal (Touch) FT2080-A1
Installation of module bus cards for AlgoRex migration:
●Line card (AnalogPLUS) FCL2005-A1
●Line card (interactive) FCL2006-A1
●Line card (interactive Ex) FCL2007-A1
Corrections and additions:
●Note on Ethernet loop FN2008 added.
●RS485 module: Slot address assignment
●FC2080: Chapter 'Wiring the system supply and module bus' moved up one
level and detailed wiring diagrams added
●FC2080: Chapter 'Parallel connection of three power supplies' – Connection
diagram modified
●FC2080: Wiring diagram of the mains supply cable on carrier (19", power
supply) integrated
●FC2080: Installing the power supply kit (150 W) – Wiring, connection diagram
for mains supply cable modified
●FC2080: Key safe adapter, chapter on wiring with FDCIO222 added and
wiring via I/O card (programmable) changed (heating isolation integrated)
●Various minor corrections and adaptations
CPR replaces CPD: The Construction Products Regulation (CPR 305/2011)
replaces the previous Construction Products Directive (CPD 89/106).
o 05.2012 Edition MP-EN 4.0
Fire control panel FC2080:
●Housing (19", pedestal cabinet) FH2080-AA
●Processor unit (19", FC2080) FCC2002-A1
●CPU card (FC2080) FCC2004-A1
●Communication card (FC2080) FCC2005-A1
●Network module (SAFEDLINK, CC) FN2010-A1
●I/O card (remote transmission) FCI2007-A1
●Installation and wiring of key safe adapter [DE]
Fire control panel FC2060/FC2080:
●I/O card (horn/monitored) FCI2009-A1
●Power supply unit (150 W) Version A5
FG2020
●Link to the Technical Manual FG2020, A6V10281424
Revision of:
Power supply unit (150 W) Version A4
n 05.2010 Third edition MP3.0
●Revision history redefined and standardized
●Installation of FN2008 and FN2009 revised (symmetry element removed)
●Integration of PMI & mainboard FCM2027
●Mounting of remote EVAC-NL revised
●Pin assignment for event printer FTO2001-A1
●Various minor changes

About this document
Revision history
1
14 | 354
Building Technologies
008851_s_en_
--
Fire Safety
2016
-
01
-
27
Version Edition date Brief description
m 03.2010 Second edition MP3.0 for VdS:
●Assignment of manufacturer designation "Scalance" to BT designation
l 10.2009 First edition MP3.0 for VdS
Integration of Scalance module for extended networking:
●Installation arrangement
●Installing mounting kit
●Installing Scalance modules
k02.2009 Fifth edition MP2.1
●Operating add-on FCM2015-D1 removed
●Mounting of remote EVAC-NL FCM2008-N1 integrated
●Mounting of EVAC-NL mimic display driver FT2003-N1 integrated
●Various minor corrections
j 01.2009 Fourth edition MP2.1
●Operating add-on FCM2008-N1 modified (adjustment elements)
i 11.2008 Third edition MP2.1
●Various corrections
●150 W supply, horizontal
●Card cage mounting
●Module bus card pin assignment
h 08.2008 Second edition MP2.1 for field test
●Various corrections and additions
g 2008-05 First edition MP2.1 for VdS
●New MP2.1 components
●Minor changes
f 2007-12 Fourth, corrected and extended edition of MP1.2
●RT interface [CH]
●Rear panels [CH] added to chap. 3
●Mounting material extended
●Chap. 4 mounting process added to
●Chap. 6.25 recess mounting kit, mounting steps corrected
e 09.2007 Third extended edition MP1.2
●Insert printing paper
●Sounder module
●RT interface [NL]
●Chap. 4.3 new cascading diagrams
d 08.2007 Second extended edition MP1.2
c 06.2007 Extended edition MP1.2
b 02.2007 MP1.2 edition for VdS
a 09.2006 First edition MP1.1

Safety
Safety instructions
2
15 |
354
Building Technologies
008851_s_en_
--
Fire Safety
2016
-
01
-
27
2Safety
2.1 Safety instructions
The safety notices must be observed in order to protect people and property.
The safety notices in this document contain the following elements:
●Symbol for danger
●Signal word
●Nature and origin of the danger
●Consequences if the danger occurs
●Measures or prohibitions for danger avoidance
Symbol for danger
This is the symbol for danger. It warns of risks of injury.
Follow all measures identified by this symbol to avoid injury or death.
Additional danger symbols
These symbols indicate general dangers, the type of danger or possible
consequences, measures and prohibitions, examples of which are shown in the
following table:
General danger Explosive atmosphere
Voltage/electric shock Laser light
Battery Heat
Signal word
The signal word classifies the danger as defined in the following table:
Signal word Danger level
DANGER DANGER identifies a dangerous situation, which will result directly in death or
serious injury if you do not avoid this situation.
WARNING WARNING identifies a dangerous situation, which may result in death or serious
injury if you do not avoid this situation.
CAUTION CAUTION identifies a dangerous situation, which could result in slight to
moderately serious injury if you do not avoid this situation.
NOTICE NOTICE
identifies possible damage to property that may result from non-
observance.

Safety
Safety instructions
2
16 | 354
Building Technologies
008851_s_en_
--
Fire Safety
2016
-
01
-
27
How risk of injury is presented
Information about the risk of injury is shown as follows:
WARNING
Nature and origin of the danger
Consequences if the danger occurs
●
Measures / prohibitions for danger avoidance
How possible damage to property is presented
Information about possible damage to property is shown as follows:
NOTICE
Nature
and origin of the danger
Consequences if the danger occurs
●Measures / prohibitions for danger avoidance

Safety
Safety regulations for the method of operation
2
17 |
354
Building Technologies
008851_s_en_
--
Fire Safety
2016
-
01
-
27
2.2 Safety regulations for the method of operation
National standards, regulations and legislation
Siemens products are developed and produced in compliance with the relevant
European and international safety standards. Should additional national or local
safety standards or legislation concerning the planning, mounting, installation,
operation or disposal of the product apply at the place of operation, then these
must also be taken into account together with the safety regulations in the product
documentation.
Electrical installations
WARNING
Electrical voltage
Electric shock
●Work on electrical installations may only be carried out by qualified
electricians or by instructed persons working under the guidance and
supervision of a qualified electrician, in accordance with the electrotechnical
regulations.
●Wherever possible disconnect products from the power supply when carrying
out commissioning, maintenance or repair work on them.
●Lock volt-free areas to prevent them being switched back on again by mistake.
●Label the connection terminals with external external voltage using a
'DANGER External voltage' sign.
●Route mains connections to products separately and fuse them with their own,
clearly marked fuse.
●Fit an easily accessible disconnecting device in accordance with IEC 60950-1
outside the installation.
●Produce earthing as stated in local safety regulations.
CAUTION
Noncompliance with the
following safety regulations
Risk of injury to persons and damage to property
●
Compliance with the following regulations is required.
●Specialist electrical engineering knowledge is required for installation.
●Only an expert is permitted to carry out installation work.
Incorrect installation can take safety devices out of operation unbeknown to a
layperson.

Safety
Safety regulations for the method of operation
2
18 | 354
Building Technologies
008851_s_en_
--
Fire Safety
2016
-
01
-
27
Mounting, installation, commissioning and maintenance
●If you require tools such as a ladder, these must be safe and must be intended
for the work in hand.
●When starting the fire control panel ensure that unstable conditions cannot
arise.
●Ensure that all points listed in the 'Testing the product operability' section below
are observed.
●You may only set controls to normal function when the product operability has
been completely tested and the system has been handed over to the customer.
Testing the product operability
●Prevent the remote transmission from triggering erroneously.
●If testing building installations or activating devices from third-party companies,
you must collaborate with the people appointed.
●The activation of fire control installations for test purposes must not cause
injury to anyone or damage to the building installations. The following
instructions must be observed:
–Use the correct potential for activation; this is generally the potential of the
building installation.
–Only check controls up to the interface (relay with blocking option).
– Make sure that only the controls to be tested are activated.
●Inform people before testing the alarm devices and allow for possible panic
responses.
●Inform people about any noise or mist which may be produced.
●Before testing the remote transmission, inform the corresponding alarm and
fault signal receiving stations.
Modifications to the system design and the products
Modifications to the system and to individual products may lead to faults,
malfunctioning and safety risks. Written confirmation must be obtained from
Siemens and the corresponding safety bodies for modifications or additions.

Safety
Standards
and directives complied with
2
19 |
354
Building Technologies
008851_s_en_
--
Fire Safety
2016
-
01
-
27
Modules and spare parts
●Components and spare parts must comply with the technical specifications
defined by Siemens. Only use products specified or recommended by
Siemens.
●Only use fuses with the specified fuse characteristics.
●Wrong battery types and improper battery changing lead to a risk of explosion.
Only use the same battery type or an equivalent battery type recommended by
Siemens.
●Batteries must be disposed of in an environmentally friendly manner. Observe
national guidelines and regulations.
Disregard of the safety regulations
Before they are delivered, Siemens products are tested to ensure they function
correctly when used properly. Siemens disclaims all liability for damage or injuries
caused by the incorrect application of the instructions or the disregard of danger
warnings contained in the documentation. This applies in particular to the following
damage:
●Personal injuries or damage to property caused by improper use and incorrect
application
●Personal injuries or damage to property caused by disregarding safety
instructions in the documentation or on the product
●Personal injury or damage to property caused by poor maintenance or lack of
maintenance
2.3 Standards and directives complied with
A list of the standards and directives complied with is available from your Siemens
contact.
2.3.1 CPR conformity and firmware version
In order to satisfy Ordinance No. 305/2011 (the Construction Products Regulation –
CPR), the firmware of a newly installed fire detection installation must be current
market package version MP6 or higher.
NOTICE
Firmware version of a newly installed fire detection installation not updated
No CPR conformity
●Compare the firmware version of a newly installed fire detection installation
with the firmware version MP6.
●
Update the firmware if necessary.

Safety
Release Notes
2
20 | 354
Building Technologies
008851_s_en_
--
Fire Safety
2016
-
01
-
27
2.4 Release Notes
Limitations to the configuration or use of devices in a fire detection installation with
a particular firmware version are possible.
WARNING
Limited or non
-
existent fire detection
Personal injury and damage to property in the event of a fire.
●Read the 'Release Notes' before you plan and/or configure a fire detection
installation.
●Read the 'Release Notes' before you carry out a firmware update to a fire
detection installation.
NOTICE
Incorrect planning and/or configuration
Important standards and specifications are not satisfied.
Fire detection installation is not accepted for commissioning.
Additional expense resulting from necessary new planning and/or configuration.
●Read the 'Release Notes' before you plan and/or configure a fire detection
installation.
●Read the 'Release Notes' before you carry out a firmware update to a fire
detection installation.