Siemens ARCADIS Varic Installation manual

© Siemens AG
The reproduction, transmission or use
of this document or its contents is not
permitted without express written
authority. Offenders will be liable for
damages. All rights, including rights
created by patent grant or registration
of a utility model or design, are
reserved.
Print No.:
Mühlhäusser
ARCADIS
System
Installation and Startup
SP
2005
SPR2-310.814.05.02.02
Replaces: SPR2-310.814.05.01.02
English
Doc. Gen. Date: 01.05
Installation Video Splitter
Valid for
- ARCADIS Varic
- ARCADIS Orbic
1004768080800017

2 Revision / Disclaimer
ARCADIS SPR2-310.814.05.02.02 Siemens AG
01.05 CS SD 24
Page 2 of 12
Medical Solutions
1Revision / Disclaimer
Document revision level
The document corresponds to the version/revision level effective at the time of system
delivery. Revisions to hardcopy documentation are not automatically distributed.
Please contact your local Siemens office to order current revision levels.
Disclaimer
The installation and service of equipment described herein is to be performed by qualified
personnel who are employed by Siemens or one of its affiliates or who are otherwise
authorized by Siemens or one of its affiliates to provide such services.
Assemblers and other persons who are not employed by or otherwise directly affiliated
with or authorized by Siemens or one of its affiliates are directed to contact one of the
local offices of Siemens or one of its affiliates before attempting installation or service pro-
cedures.

Siemens AG SPR2-310.814.05.02.02 ARCADIS
01.05 CS SD 24
Table of Contents 3
Page 3 of 12
Medical Solutions
0Table of Contents
1 _______ Prerequisites ___________________________________________________ 4
Prerequisites. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
General requirement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Required documents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
System requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Required parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2 _______ Installation and settings __________________________________________ 6
Work sequence. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Installation of the video splitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Final work steps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
3 _______ Changes to Previous Version _____________________________________ 12

4 Prerequisites
ARCADIS SPR2-310.814.05.02.02 Siemens AG
01.05 CS SD 24
Page 4 of 12
Medical Solutions
1-1Prerequisites
Prerequisites 0
General requirement 0
The following monitor specifications are required for use with the video splitter:
Required documents 0
n.a.
System requirements 0
n.a.
Required parts 0
- SX VGA
- 1280 x 1024
- 75 Hz
Video splitter “Live” option, 14 400 894 Part no.: 80 81 882, 1x video split-
ter + mechanical components
incl. rear cover
and if desired
Video splitter "Reference" option, 14 400 895 Part no.: 80 81 890, 1x video split-
ter

Siemens AG SPR2-310.814.05.02.02 ARCADIS
01.05 CS SD 24
Prerequisites 5
Page 5 of 12
Medical Solutions
Fig. 1: Kit
Pos. 1 Threaded plate
Pos. 2 Mounting frame
Pos. 3 Video splitter
Pos. 4 Line and VGA cables
Pos. 5 Slider
Tools 0
Tool kit
Safety information 0
WARNING Risk of physical injury or death and property damage!
Noncompliance can lead to death, physical injury or property
damage.
Strictly follow:
¹The product-specific safety information in these instruc-
tions
¹The general safety information in the instructions
TD00-000.860.01... and
¹The general safety information according to ARTD part 2.

6 Installation and settings
ARCADIS SPR2-310.814.05.02.02 Siemens AG
01.05 CS SD 24
Page 6 of 12
Medical Solutions
2-2Installation and settings
Work sequence 0
Installation of the video splitter 0
NOTE These instructions describe installation of the option for the "live"
and the "reference" monitor.
If only the "live" option is available, carry out the cabling and the
mechanical installation for the "live" monitor.
Fig. 2: Cables

Siemens AG SPR2-310.814.05.02.02 ARCADIS
01.05 CS SD 24
Installation and settings 7
Page 7 of 12
Medical Solutions
1. Remove the rear and side covers of the monitor trolley (already performed in
(Fig.2/p.6)and (Fig.3/p.7)).
2. Check if the space of 4 mounting holes (1/Fig.2/p.6)is available at the slot. If not, dis-
place the panel because the space is necessary for the video splitter.
Fig. 3: Power cable
3. Disconnect the power cable from the live monitor and reference monitor (if option is
available) and pull this cable back to the location shown in (2/Fig.2/p.6).
4. Use the supplied kit to run the power cables as shown in ((4/Fig.2/p.6)and
(Fig.3/p.7)).The angle plug must be inserted into the round cable duct inlet as shown
in (Fig.3/p.7).
5. Pull the angle cable plug of each distributor cable to location (3/Fig.2/p.6).
6. Connect the distributor cable (straight plug) to the disconnected power cable of the
monitors (2/Fig.2/p.6).
7. Connect the 2nd piece of the distributor cable (straight plug) to the corresponding moni-
tor as shown in (Fig.2/p.6).

8 Installation and settings
ARCADIS SPR2-310.814.05.02.02 Siemens AG
01.05 CS SD 24
Page 8 of 12
Medical Solutions
8. Disconnect the monitor VGA cable from the live monitor and reference monitor (if option
is available). Pull the cable(s) back to the location shown in (2/Fig.2/p.6)
Fig. 4: Mounting
9. Use the supplied kit to pull the VGA cable(s) from location (3/Fig.2/p.6)to the moni-
tor(s) and connect it/them to the monitor(s). Run the cables as shown in (Fig.3/p.7).

Siemens AG SPR2-310.814.05.02.02 ARCADIS
01.05 CS SD 24
Installation and settings 9
Page 9 of 12
Medical Solutions
10. Mount the video splitter for the live monitor on the mounting rack as shown in
(Fig.4/p.8).
If a video splitter for the reference monitor is available, mount it next to the video splitter
for the live monitor.
Fig. 5: Wiring diagram
11. Switch the line switch of the video splitter on.

10 Installation and settings
ARCADIS SPR2-310.814.05.02.02 Siemens AG
01.05 CS SD 24
Page 10 of 12
Medical Solutions
12. Connect "VGA IN", "VGA OUT" and "Power" to the video splitter according to the wiring
diagram (Fig.5/p.9).
Fig. 6: Connection
13. Push the video splitter mount into the monitor trolley slot and screw it on via the
threaded plate (Fig.6/p.10).
Fig. 7: Slider
14. Connect the external monitors to the corresponding "RGB OUT" connectors on the
video splitter.

Siemens AG SPR2-310.814.05.02.02 ARCADIS
01.05 CS SD 24
Installation and settings 11
Page 11 of 12
Medical Solutions
15. Mount the cable holders (1/Fig.7/p.10)from the old rear cover on the new rear cover.
16. Mount the slider (2/Fig.7/p.10)on the new rear cover.
Fig. 8: Labels_
17. Affix the new labels as shown in (Fig.8/p.11).
Label 80 80 882 for the live monitor.
Label 80 80 890 for the reference monitor.
18. Reattach all covers and switch the system on.
Final work steps 0
1. Perform a functional check.
2. Check the image on all connected live and reference monitors.

12 Changes to Previous Version
ARCADIS SPR2-310.814.05.02.02 Siemens AG
01.05 CS SD 24
Page 12 of 12
Medical Solutions
3-3Changes to Previous Version
n.a.; initial publication.