Siemens FDB22 Series User manual

Building Technologies
CPS Fire Safety
FDB22x, FDB20x,
FDB241, FDB281, FDB299
Sinteso™
Detector bases and accessories
addressable (FDnet), collective
Bases made from impact-proof and scratch-resistant synthetic material
Screw less terminals for easy connection without any tools
FDB2x1-AA incl. 1 micro terminal
Completely covered by the detector
FDB201, FDB201-AA, FDB221, FDB221-AA for recess or surface cable entry
FDB202, FDB222 for gap free ceiling mounting
Accessories for surface mounting, humid or wet environments, theft preven-
tion, dust protection, location inscription and detector heating unit against
moisture condensation or frost formation, sealing element for higher protec-
tion category
Version for addressable or collective fire detectors
Ecologic material concept

2
Building Technologies
CPS Fire Safety
Characteristics
Environmental
– ecologically processing
– recyclable materials
Characteristics
– universal base, suited for surface and recess cable entries
– extra-large mounting slots facilitate a re-use of existing drill holes resulting from other
systems
– large opening in the detector base for easy cable insertion
– screw less terminals (spring clip principle)
– detector line can be connected without any tools; the wire can be simply plugged in
manually
– loop contact
– place for auxiliary terminals, for the connection of 2 alarm indicators, cable screening
or the connection of a detector heating unit
Detector bases
FDB221 / FDB221-AA
– base with stand-offs for fire detectors with addressable signal processing
– terminals ‘orange’, wire cross-sectional area from 0.2 to 1.5 mm2
– FDB221-AA contains additional 1 micro terminal DBZ1190-AA
FDB201 / FDB201-AA
– base with stand-offs for fire detectors with collective signal processing
– terminals 'grey', wire cross-sectional area from 0.2 to 1.5 mm2
– FDB201-AA contains additional 1 micro terminal DBZ1190-AA
Application
– for recess supply wiring
– for surface supply wiring, cable diameter up to 6 mm
FDB222
– base without stand-offs for fire detectors with addressable signal processing
– terminals ‘orange’, wire cross-sectional area from 0.2 to 1.5 mm2
FDB202
– base without stand-offs for fire detectors with collective signal processing
– terminals 'grey', wire cross-sectional area from 0.2 to 1.5 mm2
Application
– for gap free ceiling mounting, only for recess supply wiring
FDB2x1 / FDB2x1-AA FDB202 / FDB222
Base height 22 mm
Height with inserted detec-
tor 54 mm
Base height 17 mm
Height with inserted detec-
tor 49 mm
Mounting slots min. 46 mm to max. 79 mm
Loop contact
Screw less connecting terminals
Ø100
Opening for cable entry

3
Building Technologies
CPS Fire Safety
Auxiliary terminals / Micro terminals
DBZ1190-AA
– for conductors of max. 0.5 mm2
DBZ1190-AB
– for conductors of max. 2.5 mm2
– for the connection of 2 alarm indicators or cable screening
DBZ1190-AB
Detector bases FDB2xx / FDB2x1-AA
DBZ1190-AA
Sealing element
FDBZ295
– to increase IP rating. However detectors can no longer be inserted or removed
using detector exchanger
Note: Not usable together with designation plate FDBZ291
Designation plates
FDBZ291
– to identify the location address
DBZ1193A
– to identify the location address
FDBZ291 DBZ1193A
for detector base and base attachment for base attachment wet

4
Building Technologies
CPS Fire Safety
Detector heating
FDBH291
– for the operation of the fire detectors in critical environments, danger of frost forma-
tion or moisture condensation, e.g. in cold storage houses, attics, loading ramps,
cheese storage cellars, etc.
– optimum function of the detector heating is only ensured with the base attachment
humid FDB293
– the temperature of the detector is increased by approx. 2° in relation to the ambient
temperature, so that moisture condensation is prevented
– detector heating is fixed to the detector base with a spring-loaded catch
Detector locking device
FDBZ293
– to protect the detector against theft
Threaded pin M3 x 6
Hexagonal wrench

5
Building Technologies
CPS Fire Safety
Base attachment
FDB291
– for the supply of surface-mounted lines > 6 mm
– detector base fixed with spring-loaded catch
Base height 25 mm
Height with inserted detector 60 mm
Opening for cable entry
Mounting slots min. 46 mm, max. 90 mm
Ø 120
Base attachment humid with seal
FDB293
– for higher protection category
– for mounting in humid or wet environments
– detector base FDB2x1/-AA fixed with spring-loaded catch
– when the detector heating unit is used
Mounting holes 153.5 mm
Base height 49 mm
Height with inserted detector 87 mm
Ø 135
Base adaptor
FDB281
– adaptor for MS8 detector base (existing, addressable MS8 fire detection systems)
Detector base MS8
Base height 37 mm
Height with inserted detector 73 mm
Adaptor incl. addressable detector base,
Connecting terminals 'orange’

6
Building Technologies
CPS Fire Safety
FDB241
– Adaptor for AlgoRex or SIGMASYS detector base
SIGMASYS base (SPF3600)
or AnalogPLUS (DB1131A)
or Interactive (DB1151A)
Base height 29.5 mm
Height with inserted detector 74.5 mm
Adaptor incl. detector base,
Connecting terminals 'orange’
FDB299
– Adaptor for AlgoRex collective or SIGMACON detector base
DB1101A (conventional)
SPF600 base
Base height 29.5 mm
Height with inserted detector 74.5 mm
Adaptor incl. detector base,
Connecting terminals ‘grey’
FDUD290
– Removing tool for base adaptor FDB241 or FDB299
Base
Base adaptor FDB241 or FDB299
FDUD290, Removing tool
(S54370-S13-A1)
FDUD291 Detector exchanger or
FDUD292 Detector exchanger and tester

7
Building Technologies
CPS Fire Safety
Protective cages
DBZ1194
– for the protection of the detector against damage
– can only be used together with the base attachment humid FDB293
Base height with inserted protective cage =
145 mm
Ø 158,5
– FDBZ294
– to protect the detector from large electromagnetic fields
– can only be used together with the base attachment humid FDB293
Base height with inserted protective
cage = 110 mm
Ø 140
Detector dust cap
FDZ291
– to cover the detector, for the protection against dust during construction work

Siemens Switzerland Ltd
Infrastructure & Cities Sector
Building Technologies Division
International Headquarters
CPS Fire Safety
Gubelstrasse 22
CH-6301 Zug
Tel. +41 41 – 724 24 24
www.siemens.com/buildin
g
technolo
g
ies
© 2011 Copyright by
Siemens Switzerland Ltd
Data and design subject to change without notice.
Supply subject to availability.
Document no. 007775_o_en_-- Manual FD20
Edition 11.2011 Section 7
Technical data
Detector bases Conductor cross section
– Connecting terminals in detector base 0.2... 1.5 mm2
– Auxiliary terminals 1.0... 2.5 mm2
– Micro terminals 0.28... 0.5 mm2
Operating temperature, Storage temperature,
Humidity, Protection category EN60529 / IEC529
according to data sheet de-
tectors
Color white, ~RAL 9010
Detector heating FDBH291 Operating voltage (normal operation) DC 20... 30 V
Operating current 35... 55 mA
Operating temperature -30... +40 °C
Storage temperature -30... +60 °C
Details for ordering
Type Part no Designation Weight
Detector bases FDB201 A5Q00003814 Detector base conventional 0.026 kg
FDB202
S54319-F3-A1 Detector base conventional, flat 0.025 kg
FDB201-AA A5Q00012742 Detector base conventional incl. 1
micro terminal DBZ1190-AA
0.029 kg
FDB221 A5Q00001664 Detector base addressable 0.026 kg
FDB222
S54319-F1-A1 Detector base addressable, flat 0.025 kg
FDB221-AA A5Q00012741 Detector base addressable incl. 1
micro terminal DBZ1190-AA
0.029 kg
Accessories FDBZ291 A5Q00002621 Designation plate (10x) 0.034 kg
DBZ1193A BPZ:4864330001 Designation plate (10x) 0.076 kg
FDBH291 A5Q00004439 Detector heating incl. micro terminals
DBZ1190-AA
0.039 kg
DBZ1190-AA BPZ:4677080001 Micro terminals 0.28... 0.5 mm20.001 kg
DBZ1190-AB BPZ:4942340001 Auxiliary terminals 1.0... 2.5 mm20.007 kg
FDBZ293 A5Q00005035 Detector locking device (2 hexagonal
key, 100 hexagonal socket pins)
0.035 kg
FDB291 A5Q00001603 Base attachment 0.035 kg
FDB293 A5Q00003945 Base attachment wet 0.320 kg
FDB281 A5Q00004929 Base adaptor 0.123 kg
FDB241 S54319-F13-A1 Base adaptor Sinteso (SIGMA/A+) 0.123 kg
FDB299 S54319-F14-A1 Base adaptor Sinteso (AlgoRex-C) 0.123 kg
FDUD290 S54370-S13-A1 Removing tool for adaptor 0.100 kg
DBZ1194 BPZ:4677110001 Protective cage 0.176 kg
FDBZ294 A5Q00023040 EMC Protective cage 0.144 kg
FDBZ295 S54319-F10-A1 Sealing element 0.062 kg
FDZ291 A5Q00004814 Detector dust cap 0.005 kg
– A5Q00004478 Metal screwed cable gland M20 x 1.5 0.039 kg
Detectors see data sheet 007005, 007850
Colored base and base attachment see data sheet 009409
Details see equipment overview 008164