Simons Voss SmartIntego SmartHandle Series User manual

SmartHandle
SmartIntego
Manual
28.10.2020

Contents
1 General safety instructions.....................................................................................................................6
2 Product specific safety notices .............................................................................................................9
3 Meaning of the text formatting ............................................................................................................12
4 Intended use ...............................................................................................................................................13
5 General information ................................................................................................................................ 14
6 Designs ........................................................................................................................................................ 16
6.1 Prerequisites......................................................................................................................................................17
6.2 Mechanical Override (MO).........................................................................................................................21
6.3 Profiles..................................................................................................................................................................21
6.4 Fastening............................................................................................................................................................22
6.4.1 RRMO ................................................................................................................................................. 23
6.4.2 RMO ....................................................................................................................................................24
6.5 Distances and door thicknesses.............................................................................................................25
6.5.1 Profile cylinder (PC)....................................................................................................................26
6.5.2 Swiss round (SR) .........................................................................................................................28
6.5.3 Scandinavian oval (SO)............................................................................................................29
6.6 ES1/SKG/PAS24............................................................................................................................................30
6.7 SmartHandle without electronics ........................................................................................................30
6.8 Spindle .................................................................................................................................................................31
6.9 Backplate width/wide .................................................................................................................................32
6.10 DoorMonitoring (DM)...................................................................................................................................32
6.11 Handle variants...............................................................................................................................................33
6.12 Surface finishes.............................................................................................................................................. 34
6.13 Reader technology ....................................................................................................................................... 34
6.14 Options............................................................................................................................................................... 34
6.14.1 WP Version (weatherproof) ...................................................................................................34
6.14.2 DP version (drill protection)....................................................................................................34
6.14.3 Escape&Return function ..........................................................................................................35
7 Storage ....................................................................................................................................................... 36
8 Installation (manual) .............................................................................................................................37
8.1 Snap-in................................................................................................................................................................37
8.1.1 Contents of packaging............................................................................................................... 37
8.1.2 Tools required ................................................................................................................................ 37
8.1.3 Installation instructions SnapIn............................................................................................. 37
8.1.4 Snap-in............................................................................................................................................. 38
SmartHandle SmartIntego (Manual) Contents
2 / 160

8.1.5 Snap-in WP......................................................................................................................................41
8.1.6 Snap-in diagrams.........................................................................................................................43
8.1.7 Restore storage mode for Snap-in..................................................................................... 44
8.2 Snap-in DoorMonitoring ............................................................................................................................ 45
8.2.1 Contents of packaging.............................................................................................................. 45
8.2.2 Tools required ............................................................................................................................... 45
8.2.3 Installation instructions SnapIn............................................................................................ 45
8.2.4 Assembly Snap-In Door Monitoring................................................................................... 46
8.3 Conventional fastening .............................................................................................................................. 53
8.3.1 Contents of packaging...............................................................................................................53
8.3.2 Tools required ................................................................................................................................53
8.3.3 Installation instructions.............................................................................................................53
8.3.4 Conventional fastening system............................................................................................ 54
8.3.5 Conventional fastening system WP.................................................................................... 57
8.3.6 Diagrams for conventional fastening system................................................................60
8.3.7 Restore storage mode for conventional fastening system ....................................60
8.4 Conventional fastening system WO..................................................................................................... 61
8.4.1 Contents of packaging................................................................................................................61
8.4.2 Tools required .................................................................................................................................61
8.4.3 Installation instructions MO .....................................................................................................61
8.4.4 Conventional fastening system WO.................................................................................. 63
8.4.5 Conventional fastening system MO WP.......................................................................... 66
8.4.6 Diagrams for conventional fastening system................................................................ 69
8.4.7 Restore storage mode for conventional fastening system MO ............................70
8.5 Conventional fastening ES1/SKG/PAS24......................................................................................... 70
8.5.1 Contents of packaging...............................................................................................................70
8.5.2 Tools required ................................................................................................................................. 71
8.5.3 Installation instructions.............................................................................................................. 71
8.5.4 Assembly ES1-/SKG-/PAS24 SmartHandle .................................................................. 72
8.6 Conventional fastening system for DoorMonitoring..................................................................... 77
8.6.1 Contents of packaging................................................................................................................77
8.6.2 Tools required ................................................................................................................................78
8.6.3 Installation instructions.............................................................................................................78
8.6.4 Installation conventional fastening door monitoring .................................................79
8.6.5 Disassembling DoorMonitoring components................................................................ 86
8.7 Additional info: DoorMonitoring sensor lock.....................................................................................87
8.7.1 Sensor lock components..........................................................................................................87
8.7.2 Installation (manual) .................................................................................................................87
8.8 Swiss Round MO ...........................................................................................................................................89
8.8.1 Contents of packaging.............................................................................................................. 89
8.8.2 Tools required ............................................................................................................................... 89
8.8.3 Installation instructions MO................................................................................................... 89
8.8.4 Conventional fastening system, including Swiss Round MO: ...............................90
SmartHandle SmartIntego (Manual) Contents
3 / 160

8.8.5 Conventional fastening system, including Swiss Round MO WP........................ 93
8.8.6 Diagrams for conventional fastening system................................................................ 96
8.8.7 Restore storage mode for SwissRound MO....................................................................97
8.9 Scandinavian Oval ........................................................................................................................................97
8.9.1 Contents of packaging...............................................................................................................97
8.9.2 Tools required ............................................................................................................................... 98
8.9.3 Installation instructions............................................................................................................ 98
8.9.4 Conventional fastening system Scandinavian Oval .................................................. 99
8.9.5 Conventional fastening system for Scandinavian Oval DP...................................103
8.9.6 Conventional fastening system for Scandinavian Oval MO ................................ 106
8.9.7 Diagrams for Scandinavian Oval........................................................................................ 107
8.9.8 Restore storage mode for ScandinavianOval.............................................................. 107
8.10 SmartHandle Hybrid .................................................................................................................................107
8.11 Steel frame with/without MO (RRMO) ...........................................................................................108
8.11.1 Contents of packaging............................................................................................................ 108
8.11.2 Tools required ............................................................................................................................. 109
8.11.3 Installation instructions MO ................................................................................................. 109
8.11.4 Installation......................................................................................................................................110
8.12 Escutcheon fixing with/without MO (RMO).................................................................................... 121
8.12.1 Contents of packaging............................................................................................................. 122
8.12.2 Tools required .............................................................................................................................. 123
8.12.3 Installation instructions MO .................................................................................................. 123
8.12.4 Installation ..................................................................................................................................... 124
9 SmartIntego programming .................................................................................................................144
10 Configuration...........................................................................................................................................145
11 Status messages....................................................................................................................................146
12 Signal ......................................................................................................................................................... 147
13 Battery warning in SmartIntego........................................................................................................148
14 Battery replacement in SmartIntego...............................................................................................149
15 Maintenance, cleaning and disinfection.......................................................................................... 151
16 Disassembly............................................................................................................................................. 152
16.1 Restore storage mode for Snap-in .....................................................................................................152
16.2 Restore storage mode for conventional fastening system.....................................................152
16.3 Restore storage mode for conventional fastening system MO ............................................153
16.4 Restore storage mode for SwissRound MO ...................................................................................153
16.5 Restore storage mode for ScandinavianOval ...............................................................................153
16.6 Restore storage mode for ScandinavianOval DP........................................................................154
SmartHandle SmartIntego (Manual) Contents
4 / 160

16.7 Disassembling DoorMonitoring components ................................................................................154
16.8 Restore storage mode for RRMO.........................................................................................................155
16.9 Restore storage mode for RMO............................................................................................................155
17 Accessories ..............................................................................................................................................156
17.1 Battery set ...................................................................................................................................................... 156
17.2 Sleeves............................................................................................................................................................. 156
17.3 Handles............................................................................................................................................................ 156
17.4 Covers............................................................................................................................................................... 156
18 Technical specifications ...................................................................................................................... 157
19 Declaration of conformity ...................................................................................................................158
20 Help and other information ................................................................................................................159
SmartHandle SmartIntego (Manual) Contents
5 / 160

1 General safety instructions
Signal word (ANSI
Z535.6) Possible immediate effects of non-compliance
DANGER Death or serious injury (likely)
WARNING Death or serious injury (possible, but unlikely)
CAUTION Minor injury
IMPORTANT Property damage or malfunction
NOTE Low or none
WARNING
Blocked access
Access through a door may stay blocked due to incorrectly fitted and/or in-
correctly programmed components. SimonsVoss Technologies GmbH is
not liable for the consequences of blocked access such as access to in-
jured or endangered persons, material damage or other damage!
Blocked access through manipulation of the product
If you change the product on your own, malfunctions can occur and access through a door can
be blocked.
Modify the product only when needed and only in the manner described in the
documentation.
CAUTION
Fire hazard posed by batteries
The batteries used may pose a fire or burn hazard if handled incorrectly.
1. Do not try to charge, open, heat or burn the batteries.
2. Do not short-circuit the batteries.
IMPORTANT
Damage resulting from electrostatic discharge (ESD)
This product contains electronic components that may be damaged by electrostatic discharges.
1. Use ESD-compliant working materials (e.g. Grounding strap).
2. Ground yourself before carrying out any work that could bring you into contact with the
electronics. For this purpose, touch earthed metallic surfaces (e.g. door frames, water pipes
or heating valves).
SmartHandle SmartIntego (Manual) 1. General safety instructions
6 / 160

Damage resulting from liquids
This product contains electronic components that may be damaged by liquids of any kind.
Keep liquids away from the electronics.
Damage resulting from aggressive cleaning agents
The surface of this product may be damaged as a result of the use of unsuitable cleaning agents.
Only use cleaning agents that are suitable for plastic or metal surfaces.
Damage as a result of mechanical impact
This product contains electronic components that may be damaged by mechanical impacts of
any kind.
1. Avoid touching the electronics.
2. Avoid other mechanical influences on the electronics.
Damage due to polarity reversal
This product contains electronic components that may be damaged by reverse polarity of the
power source.
Do not reverse the polarity of the voltage source (batteries or mains adapters).
Failure of operation due to different discharged batteries
This product uses one or more batteries for power supply. The batteries are discharged at ap-
proximately the same rate.
Always replace all batteries at the same time.
Operational malfunction due to radio interference
This product may be affected by electromagnetic or magnetic interference.
Do not mount or place the product directly next to devices that could cause electromagnetic
or magnetic interference (switching power supplies!).
Communication interference due to metallic surfaces
This product communicates wirelessly. Metallic surfaces can greatly reduce the range of the
product.
Do not mount or place the product on or near metallic surfaces.
NOTE
Intended use
SimonsVoss-products are designed exclusively for opening and closing
doors and similar objects.
Do not use SimonsVoss products for any other purposes.
SmartHandle SmartIntego (Manual) 1. General safety instructions
7 / 160

Battery contact malfunction due to grease film
When touching batteries, leave a thin film of skin grease on the batteries. This film deteriorates
the contact between the electronics and the batteries.
1. Do not touch the contacts of the new batteries with your hands.
2. Use clean and grease-free gloves.
Dispose of the batteries as per local and country-specific regulations.
Function error due to poor battery contact
If the contact surface to the battery is too small, then the battery connection may not create a
stable connection to the battery.
Only use batteries that are approved by SimonsVoss.
Different times for G2 locks
The internal time unit of the G2 locks has a technical tolerance of up to ± 15 minutes per year.
Qualifications required
The installation and commissioning requires specialized knowledge.
Only trained personnel may install and commission the product.
Incorrect installation
SimonsVoss Technologies GmbH accepts no liability for damage caused to doors or compon-
ents due to incorrect fitting or installation.
Modifications or further technical developments cannot be excluded and may be implemented
without notice.
The German language version is the original instruction manual. Other languages (drafting in the
contract language) are translations of the original instructions.
Read and follow all installation, installation, and commissioning instructions. Pass these instruc-
tions and any maintenance instructions to the user.
SmartHandle SmartIntego (Manual) 1. General safety instructions
8 / 160

2 Product specific safety notices
WARNING
Mounting on fire and smoke protection doors
The SmartHandle 3062 meets the requirements for installation on fire and
smoke protection doors. All relevant proofs and certificates can be found
on our homepage under certificates.
There may be additional requirements for fire and smoke protection doors.
1. When installing electronic fittings, please pay attention to the door's
requirements relevant for approval.
2. In case of doubt, contact the exhibitor of the approval.
CAUTION
Combination with SVP lock
SmartHandle must be combined with a self-locking panic lock to guaran-
tee all functions work correctly.
Observe the lock manufacturers' Declaration of Conformity as per EN
179.
IMPORTANT
Material damage through drilling error
When you drill, you can cause damage to the door or the product if unsuitable tools are used.
The SimonsVoss Technologies GmbH accepts no responsibility for material damage due to
drilling errors.
Observe safety instructions on drill.
Malfunction due to moisture
If the exterior of the door is outside or in areas with a high level of humidity (bathrooms or laun-
dries), then use the WP version. All cable connections are then drawn into the interior area. The
inside of the WP version is not protected against moisture.
1. Always use a WP version where the outside could come into contact with moisture.
2. Ensure that no moisture can reach the inside of the door.
Damage to the cables/cable connections
If you pull the cables, the cable connections or the cable itself could be damaged.
1. Do not pull the cables.
2. Disengage and separate the plug connectors carefully.
SmartHandle SmartIntego (Manual) 2. Product specific safety notices
9 / 160

Loss of the precise guidance of the handle
It may be difficult to install on mortise locks with a retaining nut.
Do not mechanically alter the locking nut. The handle would then lose its precise guidance.
Freeze mode due to separate storage
If you store the housing halves separately for a longer period of time (more than a week), Smart-
Handle may switch to freeze mode.
Only separate the two halves of SmartHandle when installing it.
Mechanical damage to the LockNode
If the cover is fitted or removed, the LockNode can be damaged.
1. Fit or remove the cover carefully.
2. In removal, be aware of the slit in the cover.
Mechanical damage to the SmartHandle due to obstructions
If the handle can hit the wall or other objects due to the installation location, it can become de-
formed or break off.
In such situations, use a suitable door-stopper.
Mechanical damage to the handle through misuse as door-opener
Some doors are very heavy and solidly constructed. The handle is not suitable for opening such
doors.
Make suitable door openers available (suitable handles) to avoid misuse of the knob.
NOTE
Qualifications required
The installation and commissioning requires specialized knowledge.
Only trained personnel may install and commission the product.
Damage from unsuitable tool
Only use the SimonsVossfitting tool for assembly and battery changes.
Faulty orientation before fitting the conventional MO-version
The fastening holes and the spindle must be vertically aligned; otherwise, you may not be able to
install the fitting. Use the drill-hole template.
Effect of theSI:SmartHandle
The SI:SmartHandle affects only the latch of the mortice lock.
Programming with obsolete LSM version
New components can only be programmed with the current version of LSM.
SmartHandle SmartIntego (Manual) 2. Product specific safety notices
10 / 160

Stiffness of the SmartHandle due to stiff mortice lock
If the mortice lock is stiff, the SmartHandle will also be stiff.
Check that the mortice lock is free-moving.
Fitting error or incorrect order
If you make a mistake in measuring the door and order a SmartHandle, the SmartHandle will not
fit.
Check the dimensions of the door again before ordering.
SmartHandle SmartIntego (Manual) 2. Product specific safety notices
11 / 160

3 Meaning of the text formatting
This documentation uses text formatting and design elements to facilitate
understanding. The table explains the meaning of possible text formatting:
Example button
Example
Example checkbox
Example Option
[Example] Tab
"Example" Name of a displayed window
|Example| Upper programme bar
Example Entry in the expanded upper pro-
gramme bar
Example Context menu entry
▼ Example Name of a drop-down menu
"Example" Selection option in a drop-down
menu
"Example" Area
Example Field
Example Name of a (Windows) service
Example
Commands (e.g. Windows CMD
commands)
Example Database entry
[Example] MobileKey type selection
SmartHandle SmartIntego (Manual) 3. Meaning of the text formatting
12 / 160

4 Intended use
Products in the SI:SmartHandle range consist of electronic door fittings.
Users can engage SI:SmartHandle and open the door onto which it is fitted
with an authorised ID medium, such as a transponder.
The corresponding authorisations need to be issued using an electronic
locking plan.
NOTE
The SI:SmartHandle must be programmed before it is fitted to the door!
Products in the SI:SmartHandle range may only be used for locking and
unlocking doors. No other use is permitted.
SmartIntego is an independent product group from SimonsVoss. The
SmartIntego components can be set up using the SimonsVoss
configuration software and connected to an integrator system via the
SmartIntego interface. The integrator is usually a manufacturer of building
management software (access control software, EMEA solution, fire alarm
system, etc.), in which the SimonsVoss SmartIntego locking devices are
also managed. It develops the interface to his system independently and is
also responsible for the connected functions. The SmartIntego interface is
available in two versions:
SmartIntego WirelessOnline (WO)
SmartIntego Virtual Card Network (SVCN)
Integrator
Integrator system
Integrator
- Access control software
- Intrusion detection system
- Fire alarm system
- ...
establishesincludes functions
Connected
SmartHandle SmartIntego (Manual) 4. Intended use
13 / 160

5 General information
The SI:SmartHandle is an electronic fitting that can be used to open and
close doors.
Electronic fittings of the SI:SmartHandle series are available in the
following models:
Fastening Variants information
Snap-in
(drill hole-free)
Mounting on doors
Designed for a handle lock with Euro
profile or Swiss Round
The outer side can only be operated
with identification medium
The inner side always engaged
Conventional
(drill holes)
Without mechanical
override
Mounting on doors
Designed for a handle lock with Euro
profile, Swiss Round or Scandinavian
Oval
The outer side can only be operated
with identification medium
The inner side always engaged
With mechanical override
(MO)
Like the version without mechanical over-
riding, but with recess for installation of a
locking cylinder for overriding
Escutcheon installation
(Use of existing drill
holes)
see RMO [}24]
Without mechanical
override
Mounting on doors with existing
escutcheon holes (DIN 18251)
Designed for a handle lock with Euro
profile or Swiss Round
The outer side can only be operated
with identification medium
The inner side always engaged
With mechanical override
(MO)
Like the version without mechanical over-
riding, but with recess for installation of a
locking cylinder for overriding
SmartHandle SmartIntego (Manual) 5. General information
14 / 160

Fastening Variants information
Metal frame mounting
(Mounting on metal
frame doors)
see RRMO [}23]
Without mechanical
override
Mounting on metal frame doors
Designed for a handle lock with Euro
profile or Swiss Round
The outer side can only be operated
with identification medium
The inner side always engaged
With mechanical override
(MO)
Like the version without mechanical over-
riding, but with recess for installation of a
locking cylinder for overriding
In addition, fittings belonging to the SI:SmartHandle series can have the
following special functions:
ES1 certification
SKG certification
PAS24 certification
For increased safety at doors (see
ES1/SKG/PAS24 [}30] ).
DoorMonitoring
The current status of the door can
be transmitted to appropriate soft-
ware (see
DoorMonitoring (DM)
[}32] ).
SmartHandle SmartIntego (Manual) 5. General information
15 / 160

6 Designs
The following section describes the available variants or options of the
SI:SmartHandle in detail.
NOTE
Avoidance of incorrect orders through the order placement guide
SmartIntego components offer a wide variety of combinations. Not every
combination makes sense and is actually available. A manual compilation
of the product features can lead to combinations that are not available or
to incorrect orders.
Always use the order placement guide from the partner area of the
SmartIntego website (
www.smartintego.com) ).
The SI:SmartHandle has a reader on one side. The inside handle is
mechanically permanently engaged. You can use the inside handle to
operate or open the door at any time in dangerous situations, even without
an identification medium.
You can use the SI:SmartHandle for mortise locks with an operating angle
of up to 38°.
SmartHandle SmartIntego (Manual) 6. Designs
16 / 160

6.1 Prerequisites
These distances depend on the design of the door (door-specific).
SmartHandle SmartIntego (Manual) 6. Designs
17 / 160

Distance lock fol-
lower face (out-
side) to the outside
door leaf
Interior side Exterior side
The SI:SmartHandle is suitable for the following distances, depending on
the fastening:
Fastening Door thick-
ness S
Door thick-
ness M
Door thick-
ness L
conventional fastening for mortise locks
with Euro profile cylinder or Swiss Round
cylinder
SnapIn fastening for mortise locks with Euro
profile cylinder or Swiss Round cylinder
(see Fastening [}22] )
min. 4mm min. 4mm min. 4mm
Escutcheon fastening (with/without
mechanical override)
Metal frame fastening (with/without
mechanical override)
(see Fastening [}22] and RMO [}24] /
RRMO [}23] )
min. 1mm min. 1mm min. 1mm
Conventional fastening with certification ac-
cording to:
ES1
SKG
PAS24
(see Fastening [}22] and ES1/SKG/PAS24
[}30] )
no minimum
thickness
no minimum
thickness
no minimum
thickness
SmartHandle SmartIntego (Manual) 6. Designs
18 / 160

Fastening Door thick-
ness S
Door thick-
ness M
Door thick-
ness L
Conventional fixing for mortise locks with
Scandinavian Oval cylinder (with/without
mechanical override)
(see Fastening [}22] )
min. 1mm min. 1mm min. 1mm
Distance lock fol-
lower end face
(outside) to inside
door leaf
Interior side Exterior side
The SI:SmartHandle is suitable for the following distances, depending on
the fastening:
Fastening Door thick-
ness S
Door thick-
ness M
Door thick-
ness L
conventional fastening for mortise locks
with Euro profile cylinder or Swiss Round
cylinder
SnapIn fastening for mortise locks with Euro
profile cylinder or Swiss Round cylinder
(see Fastening [}22] )
min. 5mm min. 5mm min. 5mm
Escutcheon fastening (with/without
mechanical override)
Metal frame fastening (with/without
mechanical override)
(see Fastening [}22] and RMO [}24] /
RRMO [}23] )
min. 1mm min. 1mm min. 1mm
SmartHandle SmartIntego (Manual) 6. Designs
19 / 160

Fastening Door thick-
ness S
Door thick-
ness M
Door thick-
ness L
Conventional fastening with certification ac-
cording to:
ES1
SKG
PAS24
(see Fastening [}22] and ES1/SKG/PAS24
[}30] )
no minimum
thickness
no minimum
thickness
no minimum
thickness
Conventional fixing for mortise locks with
Scandinavian Oval cylinder (with/without
mechanical override)
(see Fastening [}22] )
min. 2mm min. 2mm min. 2mm
Distance lock fol-
lower face (out-
side) to the inside
door leaf
Interior side Exterior side
The SI:SmartHandle is suitable for the following distances, depending on
the fastening:
Fastening Door thick-
ness S
Door thick-
ness M
Door thick-
ness L
conventional fastening for mortise locks
with Euro profile cylinder or Swiss Round
cylinder
SnapIn fastening for mortise locks with Euro
profile cylinder or Swiss Round cylinder
(see Fastening [}22] )
max. 41mm max. 61mm max. 81mm
SmartHandle SmartIntego (Manual) 6. Designs
20 / 160