Assa Abloy Sargent PE80 Series User manual

1-800-727-5477 • www.sargentlock.com
Installation Instructions
Copyright © 2023, SARGENT Manufacturing Company. All rights reserved. Reproduction in whole or in part without the express written
permission ofSARGENT Manufacturing Company is prohibited. Patent pending and/or patent www.assaabloydss.com/patents.
End Cap Mounting Plate
PE80 Series Exit Devices
A8317-1 05/23
WARNING
This product can expose you to
lead which is known to the state of
California to cause cancer and birth
defects or other reproductive harm.
For more information go to www.
P65warnings.ca.gov.
Attention Installer: Improper
installation may result in damage
to the product and void the factory
warranty.
WARNING
1
Slide mounting plate into rail, until the mounting plate is firmly against the rail.
Rail
Mounting plate
Mounting screws
#10-24 Round head
Cover screws
#8-32 Oval head
End cap

1-800-727-5477 • www.sargentlock.com
Copyright © 2023, SARGENT Manufacturing Company. All rights reserved. Reproduction in whole or in part without the express written
permission ofSARGENT Manufacturing Company is prohibited. Patent pending and/or patent www.assaabloydss.com/patents. A8317-1 05/23
Mounting plate base should rest flat on door or
shims, without any overlap of the mounting plate
base and rail.
3
4
New installation shown
For new installation, use the inner mounting holes.
(For retrofit, use whichever holes are in-line with
the holes in the door.)
Inner
Mounting
Holes
Wire
Clearance
Inner
Mounting
Holes
2
5
Ensure mounting rail bracket is against
the rail without a gap.