Simrad GO XSE Series User manual

GO™XSE™/XSR Series
OPERATOR MANUAL
ENGLISH
www.simrad-yachting.com

Preface
Disclaimer
As Navico is continuously improving this product, we retain the
right to make changes to the product at any time which may not be
reflected in this version of the manual. Please contact your nearest
distributor if you require any further assistance.
It is the owner’s sole responsibility to install and use the equipment
in a manner that will not cause accidents, personal injury or
property damage. The user of this product is solely responsible for
observing maritime safety practices.
NAVICO HOLDING AS AND ITS SUBSIDIARIES, BRANCHES AND
AFFILIATES DISCLAIM ALL LIABILITY FOR ANY USE OF THIS PRODUCT
IN A WAY THAT MAY CAUSE ACCIDENTS, DAMAGE OR THAT MAY
VIOLATE THE LAW.
This manual represents the product as at the time of printing.
Navico Holding AS and its subsidiaries, branches and affiliates
reserve the right to make changes to specifications without notice.
Governing language
This statement, any instruction manuals, user guides and other
information relating to the product (Documentation) may be
translated to, or has been translated from, another language
(Translation). In the event of any conflict between any Translation of
the Documentation, the English language version of the
Documentation will be the official version of the Documentation.
Trademarks
®Reg. U.S. Pat. & Tm. Off, and ™ common law marks. Visit
www.navico.com/intellectual-property to review the global
trademark rights and accreditations for Navico Holding AS and
other entities.
•Navico® is a trademark of Navico Holding AS.
•SIMRAD® is a trademark of Kongsberg Maritime AS, Licensed to
Navico Holding AS.
•BEP® is a trademark of Power Products, LLC.
•Bluetooth® is a trademark of Bluetooth SIG, Inc.
•Broadband Radar™ is a trademark of Navico Holding AS.
•C-MAP® is a trademark of Navico Holding AS.
•C-Monster™ is a trademark of JL Marine Systems, Inc.
Preface | GO XSE/XSR Operator Manual 3

•CZone® is a trademark of Power Products LLC.
•DownScan Imaging™ is a trademark of Navico Holding AS.
•DownScan Overlay® is a trademark of Navico Holding AS.
•Easy Routing™ is a trademark of Navico Holding AS.
•Evinrude® is a trademark of Bombardier Recreational Products
(BRP) US, Inc.
•FishReveal™ is a trademark of Navico Holding AS.
•ForwardScan® is a trademark of Navico Holding AS.
•FUSION-Link™ is a trademark of Garmin Ltd.
•Genesis® is a trademark of Navico Holding AS.
•Ghost® is a trademark of Navico Holding AS.
•GO™ is a trademark of Navico Holding AS.
•Halo® is a trademark of Navico Holding AS.
•HONDA® is a trademark of American Honda Motor Co., Inc.
•Insight Genesis® is a trademark of Navico Holding AS.
•JOHNSON® is a trademark of Bombardier Recreational Products
(BRP) US, Inc.
•Link™ is a trademark of Navico Holding AS.
•Mercury®, Mercury Marine®, VesselView®, and SmartCraft® are
trademarks of Brunswick Corporation.
•NAC™ is a trademark of Navico Holding AS.
•Navionics® is a trademark of Navionics S.r.l.
•Naviop® is a trademark of Navico Holding AS.
•Naviop Loop® is a trademark of Navico Holding AS.
•NMEA® and NMEA 2000® are trademarks of the National Marine
Electronics Association.
•Power-Pole® is a trademark of JL Marine Systems, Inc.
•SD™ and microSD™ are trademarks of SD-3C, LLC.
•SiriusXM® is a trademark of Sirius XM Radio Inc.
•SmartCraft® and VesselView® are trademarks of Brusnwick
Corporation.
•StructureMap™ is a trademark of Navico Holding AS.
•StructureScan® is a trademark of Navico Holding AS.
•Suzuki® is a trademark of Suzuki Motor Corporation.
•TripIntel™ is a trademark of Navico Holding AS.
•VelocityTrack™ is a trademark of Navico Holding AS.
•Yamaha® is a trademark of Yamaha Corporation.
•XSE™ is a trademark of Navico Holding AS.
•ZoneTrack™ is a trademark of Navico Holding AS.
4Preface | GO XSE/XSR Operator Manual

Copyright
Copyright © 2021 Navico Holding AS.
Warranty
The warranty card is supplied as a separate document. In case of any
queries, refer to the brand website of your unit or system:
www.simrad-yachting.com
Compliance statements
Declarations
The relevant declarations of conformity are available at:
www.simrad-yachting.com
Europe
Navico declare under our sole responsibility that the product
conforms with the requirements of:
•CE under RED 2014/53/EU
United States of America
Navico declare under our sole responsibility that the product
conforms with the requirements of:
•Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference
received, including interference that may cause undesired
operation
Warning: The user is cautioned that any changes or
modifications not expressly approved by the party
responsible for compliance could void the user’s
authority to operate the equipment.
ÚNote: This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
Preface | GO XSE/XSR Operator Manual 5

communications. However, there is no guarantee that the
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna
•Increase the separation between the equipment and receiver
•Connect the equipment into an outlet on a circuit different from
that of the receiver is connected
•Consult the dealer or an experienced technician for help
ISED Canada
This device complies with ISED (Innovation, Science and Economic
Development) Canada’s license-exempt RSSs. Operation is subject
to the following two conditions: (1) This device may not cause
interference; and (2) This device must accept any interference,
including interference that may cause undesired operation of the
device.
La traduction française de ce document est disponible sur le site
Web du produit.
Australia and New Zealand
Navico declare under our sole responsibility that the product
conforms with the requirements of:
•Level 2 devices of the Radiocommunications (Electromagnetic
Compatibility) standard 2017
•Radiocommunications (Short Range Devices) Standards 2021
Internet usage
Some features in this product use an internet connection to
perform data downloads and uploads. Internet usage via a
connected mobile/cell phone internet connection or a pay-per-MB
type internet connection may require large data usage. Your service
provider may charge you based on the amount of data you transfer.
If you are unsure, contact your service provider to confirm rates and
restrictions.
6Preface | GO XSE/XSR Operator Manual

About this manual
This manual is a reference guide for operating the unit. It assumes
that all equipment is installed and configured, and that the system
is ready to use.
Images used in this manual might not exactly match the screen on
your unit.
Important text conventions
Important text that requires special attention from the reader is
emphasized as follows:
ÚNote: Used to draw the reader’s attention to a comment or
some important information.
Warning: Used when it is necessary to warn
personnel that they should proceed carefully to
prevent risk of injury and/or damage to equipment/
personnel.
Manual version
This manual is written for software version 20.2. The manual is
continually updated to match new software releases. The latest
available manual version can be downloaded from the following
website:
•www.simrad-yachting.com
Translated manuals
Available translated versions of this manual can be found on the
following website:
•www.simrad-yachting.com
Viewing the manual on the screen
The PDF viewer included in the unit makes it possible to read the
manuals and other PDF files on the screen.
The manuals can be read from a storage device connected to the
unit or copied to the unit’s internal memory.
Preface | GO XSE/XSR Operator Manual 7

The following shows an example of a manual file name. Manual file
names can vary depending on the unit.
Device registration
You are prompted to register your device during startup. You can
also register it by following the instructions when selecting the
registration option in the system settings dialog or system controls
dialog.
8Preface | GO XSE/XSR Operator Manual

Contents
17 Introduction
17 Front controls
17 Card reader
18 Home page
21 Application pages
23 Basic operation
23 Turning the system on and off
23 Remote controllers
23 System controls dialog
25 Screen capture
26 Customizing your system
26 Customizing the Home page wallpaper
26 Customizing the long press feature
27 Multiple panel pages
27 Customizing favorite pages
28 Customizing the instrument bar
31 Adjusting the split on multiple panel pages
32 Enabling or disabling features
32 Activating/deactivating features and applications
33 Password Protection
34 Charts
34 The Chart panel
34 Chart data
35 Chart sharing
35 Selecting chart source
35 Showing dual chart sources
35 Vessel symbol
35 Zooming the chart
35 Panning the chart
36 Chart orientation
36 Look ahead
37 Displaying information about chart items
37 Using the cursor on the panel
38 Measuring distance
39 Saving waypoints
Contents | GO XSE/XSR Operator Manual 9

39 Creating routes on the chart panel
39 Find objects on chart panels
40 3D charts
40 Chart overlay
41 C-MAP charts
46 Navionics charts
50 Chart settings
53 Waypoints, routes, and tracks
53 Waypoints, Routes, and Tracks dialogs
53 Waypoints
55 Routes
59 Tracks
61 Using the synchronize feature
63 Navigating
63 About navigating
63 Navigation panels
65 Menu options
65 Navigating with the autopilot
65 Navigation settings
69 TripIntel
69 About TripIntel
69 Current trip statistics
69 Automatic trip recording
70 Start and stop trip recordings
70 Long-term statistics
71 Estimated fuel range ring
72 Fuel gauge
72 Tide gauge
72 View trip recordings
74 Autopilot
74 Safe operation with the autopilot
74 Selecting active autopilot
75 The autopilot controller
75 Engaging and disengaging the autopilot
76 Autopilot indication
76 Autopilot modes
10 Contents | GO XSE/XSR Operator Manual