Simrad ME70 - REV C User manual

307958/H
May2020©KongsbergMaritimeAS
SimradME70
Multibeamscienticechosounder
FactoryAcceptanceTest
ThisistheFactoryAcceptanceTestfortheSimradME70Multibeam
scienticechosounder.
ThepurposeofthisFactoryAcceptanceTestistoverifythattheME70
systemisfullyfunctional,andmeetstheoperationalrequirements.Itis
thenreadyforpackingandshipment.Whenallthetaskshavebeendone,
thereportformmustbesignedbytherelevantparties.Thecompleted
documentthenbecomestheofcialreport.
Vessel/Customer
Serialnumbers(ifapplicable)
ProcessorUnit
TransceiverUnit
PowerSupplyUnit1
PowerSupplyUnit2
PowerSupplyUnit3
Transducer

KongsbergMaritimeAS
www.kongsberg.com
Documentinformation
•Product:SimradME70
•Document:FactoryAcceptanceTest
•Documentpartnumber:307958
•Revision:H
•Dateofissue:14May2020
Copyright
TheinformationcontainedinthisdocumentremainsthesolepropertyofKongsbergMaritimeAS.Nopartof
thisdocumentmaybecopiedorreproducedinanyformorbyanymeans,andtheinformationcontainedwithin
itisnottobecommunicatedtoathirdparty,withoutthepriorwrittenconsentofKongsbergMaritimeAS.
Warning
Theequipmenttowhichthismanualappliesmustonlybeusedforthepurposeforwhichitwasdesigned.
Improperuseormaintenancemaycausedamagetotheequipmentand/orinjurytopersonnel.Youmustbe
familiarwiththecontentsoftheappropriatemanualsbeforeattemptingtooperateorworkontheequipment.
KongsbergMaritimedisclaimsanyresponsibilityfordamageorinjurycausedbyimproperinstallation,
useormaintenanceoftheequipment.
Disclaimer
KongsbergMaritimeASendeavourstoensurethatallinformationinthisdocumentiscorrectandfairlystated,
butdoesnotacceptliabilityforanyerrorsoromissions.
Supportinformation
Ifyourequiremaintenanceorrepair,contactyourlocaldealer.Youcanalsocontactususingthefollowing
address:[email protected].Ifyouneedinformationaboutourotherproducts,visithttps:
//www.simrad.com.Onthiswebsiteyouwillalsondalistofourdealersanddistributors.

307958/H3
Tableofcontents
INTRODUCTION...........................................................................5
Purpose....................................................................................................................................5
Personnelandlocation............................................................................................................6
Referenceddocuments............................................................................................................6
Toolsandtestequipment........................................................................................................7
ACCEPTANCETESTSUMMARY......................................................9
HARDWAREANDSOFTWAREREGISTRATION............................10
Softwareitems.......................................................................................................................11
Hardwareitems.....................................................................................................................12
Display.........................................................................................................................12
ProcessorUnit.............................................................................................................12
TransceiverUnit..........................................................................................................13
PowerSupplyUnit......................................................................................................16
Transducer...................................................................................................................16
VISUALINSPECTION.................................................................17
Inspectinglogisticitems.......................................................................................................18
Visualinspectionofthedisplay............................................................................................18
VisualinspectionoftheProcessorUnit................................................................................19
VisualinspectionoftheTransceiverUnit.............................................................................20
VisualinspectionofthePowerSupplyUnit.........................................................................21
Inspectingthetransducer......................................................................................................22
TESTINGTHEME70OPERATIONALFUNCTIONALITY.................24
AssemblingtheME70Multibeamscienticechosoundertoturniton...............................24
TestingtheserialinterfacesontheProcessorUnit...............................................................26
TestingthereceiverchannelswiththeBITEMatrixfunctionality.......................................27
TestingthetransmitterchannelswiththeBITEMatrixfunctionality..................................29
MeasuringthepowersupplyoutputvoltagesintheTransceiverUnit.................................31
Recordingrawdata...............................................................................................................35
CUSTOMERACCEPTANCEFORM.................................................38
SECONDARYPROCEDURES........................................................39
TurningontheME70............................................................................................................39
TurningofftheME70...........................................................................................................41
Checkingthedatatransferonanexternalinterfaceline.......................................................42
FactoryAcceptanceTest

4307958/H
Deningtheleandfoldersettingsforrawdatarecording.................................................43
SimradME70

307958/H5
Introduction
Topics
Purpose,page5
Personnelandlocation,page6
Referenceddocuments,page6
Toolsandtestequipment,page7
Purpose
ThisistheFactoryAcceptanceTestfortheSimradME70Multibeamscienticechosounder.
ThepurposeofthisFactoryAcceptanceTestistoverifythattheME70systemisfully
functional,andmeetstheoperationalrequirements.Itisthenreadyforpackingand
shipment.Whenallthetaskshavebeendone,thereportformmustbesignedbytherelevant
parties.Thecompleteddocumentthenbecomestheofcialreport.
Note
InsomecasesthetransducerisshippedtotheinstallationshipyardbeforetheFactory
AcceptanceTesttakesplace.Thehardwareregistrationisthenomitted.TheFactory
AcceptanceTestisdonewithareplacementtransduceroradummyload.
Introduction

6307958/H
Personnelandlocation
Successfulcompletionofthetestrequiresqualiedandexperiencedtestengineersand/or
technicians.
ThisFactoryAcceptanceTestisdoneattheKongsbergMaritimepremisesinHorten,
Norway.ThetestisdonebypersonnelfromKongsbergMaritime.Allpersonnelmusthave
goodknowledgeoftheproductand/ormodule(s)athand.Basicknowledgeofcomputer
BIOSandtheWindows®operatingsystems,aswellaselectroniccircuitryanddevice
programmingisrequired.
Representativesfromtheclientand/orendusermaybepresenttowitnessthetestandresults.
Aswithallassemblyandtestproceduresrelatedtoadvancedtechnicaland/orelectronic
equipment,theskilloftheoperatorisvitaltoasuccessfulcompletionofthetasks.Theonly
waytosecurehighqualityofourproductsisrstrateworkmanshipandhighprofessional
standardsthroughouttheproductionchain.
Itisequallyimportantthatallmembersoftheproductionandtestcrewsshowinitiative,and
arewillingtosuggestimprovementstofunctionality,design,proceduresanddocuments.If
youndamistakeinadocument,orndthatinformationismissing,offerthisinformation
totheproperauthoritieswithoutfurtherdelay.Likewise,yourexperienceasaskilledworker
isvaluable.Pleaseforwardanysuggestionstomakeimprovementstotheproduct,the
design,theproductionmethod,oranyothermattersrelatedtoyourexpertise.
Referenceddocuments
TheinstallationanduseoftheME70isdescribedinseveraldocumentsandenduser
manuals.
Thislistisnotcomplete.Additionaldocumentsandendusermanualsmaybeavailablefor
theME70.ThesepublicationsarenotrelevantforthisFactoryAcceptanceTest.
Note
Unlessspeciedintheapplicableprocedure(s),theME70publicationslistedherearenot
requiredduringthisFactoryAcceptanceTest.
AllthedocumentnumbersrefertotheEnglishversionofeachpublication.
Endusermanuals
•ReferenceManualandOn-lineHelp:328588
SimradME70FactoryAcceptanceTest

307958/H7
Softwaredocuments
•SoftwareReleaseNote:308386
Customeracceptancetestprocedures
•FactoryAcceptanceTest:307958
•HarbourAcceptanceTest:307959
•SeaAcceptanceTest:307960
Toolsandtestequipment
SpecictoolsandtestequipmentarerequiredforthisSimradME70FactoryAcceptance
Test.Therequiredtoolsandequipmentmustbemadeavailablebeforethetestcanstart.
Therequiredtestequipmentislisted.Foreachitem,recordtheinstrument'sserialnumber
and-ifrelevant-itscalibrationexpirydate.
Multimeter(Makeandmodel)SerialnumberCalibration
expirydate
Personalcomputer(Makeandmodel)SerialnumberCalibration
expirydate
N/AN/A
Dummyload(Makeandmodel)SerialnumberCalibration
expirydate
KongsbergMaritime321913
N/AN/A
YouneedonedummyloadforeachTransceiverUnitconnector.
Introduction

8307958/H
NMEASimulatorsoftwareSerialnumberCalibration
expirydate
N/AN/A
SimradME70FactoryAcceptanceTest

307958/H9
Acceptancetestsummary
ThepurposeofthisFactoryAcceptanceTestistoverifythattheME70systemisfully
functional,andmeetstheoperationalrequirements.Thisacceptancetestsummaryis
providedtoofferanoverviewofthefunctionsanditemsthatneedtobetested.References
aremadetotheindividualchaptersinthisFactoryAcceptanceTest.
Procedure
1Recordthesoftwareandhardwareitemsthatareincludedinthetest.
•Hardwareandsoftwareregistration,page10
2DoavisualinspectionofeachunitthatiscomprisedbytheME70delivery.
•Visualinspection,page17
3TestthemainfunctionalityoftheME70.
•TestingtheME70operationalfunctionality,page24
4Whenallthetestshavebeensuccessfullyconcluded,opentheCustomeracceptance
form,andllitinwiththerelevantsignatures.
•Customeracceptanceform,page38
TheenduserandtechnicaldocumentationfortheME70containsseveralproceduresthat
arealsoapplicableforthisFactoryAcceptanceTest.Theseproceduresarenotpartofthe
FactoryAcceptanceTest.Theyareprovidedforreferencepurposesonly.
•Secondaryprocedures,page39
Acceptancetestsummary

10307958/H
Hardwareandsoftware
registration
Topics
Softwareitems,page11
Hardwareitems,page12
SimradME70FactoryAcceptanceTest

307958/H11
Softwareitems
EverysoftwareprogramthatisprovidedasapartoftheME70deliverymustberegistered.
Partnumberandsoftwareversionmustberegistered.Whensoftwaremedia(USBash
drive,CD,DVDetc)isprovided,thepartnumberofthemediaandtheME70software
versionprovidedonthemediamustberegistered.
SoftwarePartnumberSoftwareversion
SimradME70308305
SoftwaremediaPartnumberSoftwareversion
SimradME70387585
ThesoftwareversiononthesoftwaremediashallbethesameastheversioninstalledontheProcessorUnit.
Enduserdocumentationisincludedonthesamesoftwaremedia.
Hardwareandsoftwareregistration

12307958/H
Hardwareitems
Topics
Display,page12
ProcessorUnit,page12
TransceiverUnit,page13
PowerSupplyUnit,page16
Transducer,page16
Display
EachdisplayprovidedwiththeME70deliverymustbeuniquelyidentied.Make(s),
model(s),partnumber(s)andserialnumber(s)mustberegistered.Anyunitthatisnot
providedbyKongsbergMaritimeASdoesnotneedtoberegistered.Ifapplicable,addthe
ordernumber.
Display(Makeandmodel)1Partnumber2SerialnumberRevision
1Theunitcontainsneithercircuitboardsnormodulesthatneedtobeidentiedseparately.
2Thisisthepartnumberontheunitlabel.
ProcessorUnit
TheProcessorUnitprovidedwiththeME70deliverymustbeuniquelyidentied.Make,
model,partnumberandserialnumbermustberegistered.
SimradME70FactoryAcceptanceTest

307958/H13
ProcessorUnit1Partnumber2SerialnumberRevision
ME70ProcessorUnit(withME70software)382922
1Theunitcontainsneithercircuitboardsnormodulesthatneedtobeidentiedseparately.
2Thisisthepartnumberontheunitlabel.
TransceiverUnit
TheTransceiverUnitprovidedwiththeME70deliverymustbeuniquelyidentied.Make,
model,partnumberandserialnumbermustberegistered.TheTransceiverUnitcontains
circuitboardsandmodulesthatmustberecordedseparately.
ME70TransceiverUnit
TheTransceiverUnitcontrolsthetransmissionandreceptionmadebythe800transmitters
and800receiverchannels.25identicaltransceiverboardsareused.
TransceiverUnit1Partnumber2SerialnumberRevision
ME70TransceiverUnit345559
1Thisunitcontainscircuitboardsormodulesthatmustidentiedseparately.Observetherelevanthardware
registrationtables.
2Thisisthepartnumberontheunitlabel.
LPT32Transceiverboard
Transceiverboards(Fromright)RevisionSerialnumber
TRXU2
0
1
2
3
Hardwareandsoftwareregistration

14307958/H
Transceiverboards(Fromright)RevisionSerialnumber
4
5
6
7
8
TRXU1
9
10
11
12
13
14
15
16
TRXU0
17
SimradME70FactoryAcceptanceTest

307958/H15
Transceiverboards(Fromright)RevisionSerialnumber
18
19
20
21
22
23
24
Transceiverboard(Type):LPT32Transceiverboard
Partnumber:425841
Ethernetswitch
Makeandmodel(Makeandmodel)1Partnumber2SerialnumberRevision
HewlettPackardHP2920–48G396638
1Theunitcontainsneithercircuitboardsnormodulesthatneedtobeidentiedseparately.IftheHewlett
PackardHP2920–48GEthernetswitchisnotusedwiththisdelivery,llininformationaboutthe
replacementtypeintheemptyrow.
2Thisisthepartnumberontheunitlabel.
Hardwareandsoftwareregistration

16307958/H
PowerSupplyUnit
EachPowerSupplyUnitprovidedwiththeME70deliverymustbeuniquelyidentied.
Make,model,partnumberandserialnumbermustberecorded.
PowerSupplyUnit1Partnumber2Serialnumber
ME70PowerSupplyUnit1304834
ME70PowerSupplyUnit2304834
ME70PowerSupplyUnit3304834
1Theseunitsdonotcontainanycircuitboardsormodulesthatmustbeidentiedseparately.
2Thisisthepartnumberontheunitlabel.
Transducer
ThetransducerprovidedwiththeME70deliverymustbeuniquelyidentied.
Transducer1Partnumber2Serialnumber
ME70Transducer312–208110
1Theunitcontainsneithercircuitboardsnormodulesthatneedtobeidentiedseparately.
2Thisisthepartnumberontheunitlabel.
Note
InsomecasesthetransducerisshippedtotheinstallationshipyardbeforetheFactory
AcceptanceTesttakesplace.Thehardwareregistrationisthenomitted.
SimradME70FactoryAcceptanceTest

307958/H17
Visualinspection
Topics
Inspectinglogisticitems,page18
Visualinspectionofthedisplay,page18
VisualinspectionoftheProcessorUnit,page19
VisualinspectionoftheTransceiverUnit,page20
VisualinspectionofthePowerSupplyUnit,page21
Inspectingthetransducer,page22
Visualinspection

18307958/H
Inspectinglogisticitems
AllrelevantlogisticitemsthatareincludedwiththeME70deliveryshallbeinspected.This
includesend-usermanuals,softwareandsoftwaremedia.Ifsparepartsareincludedin
thedelivery,theseshallalsobeinspected.
Prerequisites
Thelistoflogisticitemstobedelivered(orderconrmationorcontract)mustbeavailable.
Alltherelevantitemsmustbeavailableforinspection.Neithertoolsnorinstrumentsare
required.
Context
ThevericationoftheoperatingsystemlicenseisonlyapplicableiftheProcessorUnitis
providedbySimradasapartoftheME70delivery.
Procedure
1VerifythattheME70end-usermanualshavebeenprovided.
2VerifythattheapplicableME70softwaremedia(USBashdisk,CD,DVDetc)have
beenprovided.
3VerifythattheoperatingsystemsoftwarelicensestickersisplacedontheProcessor
Unit.
4VerifythatthesparepartsprovidedmatchestheorderconrmationfortheME70
delivery.
Result
RequirementsResults
Alllogisticalitemsareavailable.
Dateandsignature:
Visualinspectionofthedisplay
AvisualinspectionoftheME70displayisrequiredtoverifyitsphysicalconditionand
appearancepriortodelivery.
Prerequisites
TheME70hasbeensetupwithitshardwareunitsconnectedasspeciedintheME70
Installationmanual.TheME70isturnedoff.Neithertoolsnorinstrumentsarerequired.
SimradME70FactoryAcceptanceTest

307958/H19
Context
ThistestprocedureisonlyapplicablewhenthedisplayisprovidedbyKongsbergMaritime
asapartoftheME70delivery.
Procedure
1Makesurethattheunit’sserialnumberhasbeenrecordedinthelistofhardwareitems.
2Makesurethatthedisplayisnew.
3Makesurethattheunitisnotphysicallydamaged,andthatthepaint-workisclean
withoutdentsorscratches.
4Makesurethattheunithasbeenidentiedwiththerelevantproductlabel(s),andthat
onelabelincludesthepartandserialnumbers.
Result
RequirementsResults
Thedisplayisnew,cleanandfreefromscratches,dentsorotherphysical
damage.
Thedisplayisclearlyidentiedwiththerelevantproductlabels.
Dateandsignature:
VisualinspectionoftheProcessorUnit
AvisualinspectionoftheME70ProcessorUnitisrequiredtoverifyitsphysicalcondition
andappearancepriortodelivery.
Prerequisites
TheME70hasbeensetupwithitshardwareunitsconnectedasspeciedintheME70
Installationmanual.TheME70isturnedoff.Neithertoolsnorinstrumentsarerequired.
Procedure
1Makesurethattheunit’sserialnumberhasbeenrecordedinthelistofhardwareitems.
2Makesurethatthecomputerisnew.
3Makesurethattheunitisnotphysicallydamaged,andthatthepaint-workisclean
withoutdentsorscratches.
4Makesurethattheunithasbeenidentiedwiththerelevantproductlabel(s),andthat
onelabelincludesthepartandserialnumbers.
Visualinspection

20307958/H
Result
RequirementsResults
TheProcessorUnitisnew,cleanandfreefromscratches,dentsorother
physicaldamage.
TheProcessorUnitisclearlyidentiedwiththerelevantproductlabels.
Dateandsignature:
VisualinspectionoftheTransceiverUnit
AvisualinspectionoftheTransceiverUnitisrequiredtoverifyitsphysicalconditionand
appearancepriortodelivery.
Prerequisites
TheME70hasbeensetupwithitshardwareunitsconnectedasspeciedintheME70
Installationmanual.TheME70isturnedoff.Neithertoolsnorinstrumentsarerequired.
Procedure
1MakesurethattheTransceiverUnitisnew.
2MakesurethattheTransceiverUnitisfullypopulatedwithallcircuitboardsand
modulesmounted.
3Makesurethattheunitisnotphysicallydamaged,andthatthepaint-workisclean
withoutdentsorscratches.
4Makesurethattheunithasbeenidentiedwiththerelevantproductlabel(s),andthat
onelabelincludesthepartandserialnumbers.
5Makesurethattheunit’sserialnumberhasbeenrecordedinthelistofhardwareitems.
Result
RequirementsResults
TheTransceiverUnitisnew,cleanandfreefromscratches,dentsorother
physicaldamage.
TheTransceiverUnitisclearlyidentiedwiththerelevantproductlabels.
TheTransceiverUnitisfullypopulatedwithallcircuitboardsandmodules
mounted.
Dateandsignature:
SimradME70FactoryAcceptanceTest