
- 3 -
USED TO PREPARE
A preparation in advance must be made before getting your hair done if you desire to
achieve a professional hairdressing effect.
Please dry your hair with hair drier, and use the hair comb to make it smooth and silky.
OPERATION GUIDELINES
1. Install the straight hair plate on the heating plate
2. Plug the power supply into power outlet.
3. Press the On/Off button, the product will be heated if the indicator light turns red.
4. Pick a strand of hair with a width of no more than 5 cm, place it between the two plates
and press the handle of the product tightly.
5. Slide and move the hair straightener from the hair root to the hair end in a few seconds
please don't pause the movement in case of getting overheating and damaging your hair.
6. Let the hair cool down; please don't comb the hair before the cooling so as not to
damage the well-dressed hair.
7. The styled or dressed hair effect will be better if using hair wax.
REDUCE STATIC ELECTRICITY AND LOOSE HAIR
The electrical ceramic coating of the style can produce ionic current to cover your hair
which will protect and care your hair all around.
The produce ionic current can reduce the occurrence of static electricity and unruly hair
and keep your hair in a smooth and silky condition all the time.
CLEANING AND STORAGE
Always turn the product's switches off and keep its power off, put it in a safe place and
leave it aside until it cools down. Do not rinse or clean the product with water. Do not
twine the power cord around the product. And please store this product in a safe and dry
place.
CAUTION
For additional protection, the installation of a residual current device with a rated residual
operating current not exceeding 30 mA is advisable in the electrical circuit supplying the
bathroom. Ask your installer for advice.
CAUTION: If the electric cable is damaged, it must be replaced by the manufacturer, his
after-sales service or people with similar qualification, in order to avoid any danger. In
order to minimize the risks of electric shock, In the event of breakdown, not to open the
case but to call upon a qualified technician for repairs.
This apparatus satisfied EC directives; it was controlled according to all the European
current directives, like: electromagnetic compatibility (EMC) and low tension (LVD). This
apparatus was designed and manufactured in respect of the last safety regulations and
technical specifications.