manuals.online logo
Brands
  1. Home
  2. •
  3. Brands
  4. •
  5. Sioux Tools
  6. •
  7. Tools
  8. •
  9. Sioux Tools 658 Operation manual

Sioux Tools 658 Operation manual

1
CAUTION
Do not at any time attempt to operate this tool without shroud and pad in place.
OPERATION
The sander is designed to operate on 90 p.s.i. air pressure. An air regulator is recommended if pressures are higher than 90
p.s.i. A filter is strongly recommended to provide clean air for long life of the sander.
Lubricate the sander by adding 8-10 drops of air motor oil into the air inlet each day before using.
HOSE AND HOSE CONNECTIONS
Hoses should not be smaller than 3/8" I.D. with 1/4" pipe thread fittings.
LUBRICATION
As mentioned above, 8-10 drops of Sioux air motor oil, Cat. No. 288, should be added to the air intake before using each day.
This will help protect the motor parts from rusting due to water in the air lines and also lubricate the parts for longer life. Caution
should be taken not to add too much oil as it will blow through the tool and may get on the surface being sanded. An air line oiler
will increase the life of the tool. The setting should be about 1 drop of oil per 1-2 minutes of use.
SPEED CONTROL AND SHUT OFF
A speed control and air shut off is located on the bottom of the housing. This
control is adjusted as shown in the diagram. This is to control the speed of the
tool for various sanding operations and to control excessive air pressure. The
control is also used to shut off the air to the tool to safely change sand paper on
the pad.
COUNTER BALANCE
The units are equipped with different counterweights to decrease the vibration.
Following is a chart of pad size and counterweight.
APPROX.
PAD SIZE PAD WEIGHT COUNTERWEIGHT
5" 90-100 Grams 64141 W/Lockout
6" 115-125 Grams 64148 W/Lockout
5" 90-100 Grams 64140 WO/Lockout
6" 115-125 Grams 64147 WO/Lockout
LOSS OF POWER & SPEED
The air motor is probably dirty and sticky. Flush out by adding very light weight oil to the air intake and run unit. Do this
several times until it runs properly. Then add 8-10 drops of Sioux air motor oil, Cat. No. 288, in the air intake and run tool to
lubricate.
WARNING
Continued exposure to vibration may cause injury to your hands or arms.
INSTRUCTIONS & PARTS LIST FOR
NO. 658, 660, 690, 697
SIOUX AIR RANDOM ORBITAL SANDER
INCLUDES B, V, VV, & X SUFFIXES
(SERIAL “E”)
Form Z262A
Date 1-02/C
Page 1 of 6
Printed In U.S.A.
MAXIMUM SPEED
COUNTERWEIGHT
OFF
2
1
2
3
61
62
63
65
64
9
10
11
12
13
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
16
17
18
19
20
21
22
23
24
25
26
58
58
57
57
56
55
54
51
52
53
59
59
4
5
6
7
8
14
15
60
60
54
55
56
58
58
59
59
60
60
61
62
3
Fig. Part
No. No. Description
Fig. Part
No. No. Description
*Order Quantity As Required
FURNISH CATALOG, SERIAL, AND MODEL NUMBER
WHEN ORDERING PARTS
1. 66339 Housing [Also Includes
(2*) Fig. 2, (4*) Fig. 46 & (4*) Fig. 52]
2. 06205 Screw—Fillister Hd. #6-32 x 5/16 Taptite (2)*
3. 35633 Lever—Valve (Palm Grip)
4. 54130 Pin
5. 35842 Lever—Valve
6. 64143 Sleeve
7. 35851 Cover
8. 07225 Screw—Phil. Pan Hd. #10-32 x 3/8
9. 63575 Stem—Valve (658, 660 Units)
66637 Stem—Valve (690, 697 Units)
10. 65289 Ring—“O”
11. 21211 Spring
12. 64132 Control—Output
13. 14312 Ring—“O” (1/16 x 7/16 x 9/16)
14. 41338 Washer—Wave
15. 25680 Washer
16. 21826 Ring—Retaining
17. 35634 Lever—Output Control
18. 41336 Washer—Belleville
19. 06672 Screw—Phil. Rd. Hd. #8-32 x 1/4"
20. 21545 Ring—Retaining
21. 10113 Bearing—Ball
22. 64212 Plate—Upper End
23. 64125 Cylinder
24. 33597 Vane—Rotor (Set of 4)
25. 64122 Rotor
26. 30001 Key—Woodruff
27. 65572 Plate—Lower End
28. 65573 Bearing—Ball
29. 63576 Spindle—Rotor
30. 10005 Bearing—Needle
31. 64140 Counterweight (WO/Lockout)(5" Pad)
64147 Counterweight (WO/Lockout)(6" Pad)
32. 07097 Screw—Button Hd. Soc. #10-24 x 1/2
33. 21751 Ring—Retaining
34. 66350 Bearing—Ball (All units except V & VV)
10228 Bearing—Ball (All V & VV units)
35. 64133 Spindle—Pad
36. 21513 Ring—Retaining
37. 64141 Counterweight (W/Lockout)(5" Pad)
64148 Counterweight (W/Lockout)(6" Pad)
38. 21223 Spring
39. 10303 Ball—Steel (1/8" Dia.)
40. 35845 Ring—Lock
41. 64136 Knob
42. 07263 Screw—Flat Hd. Cap #10-24 x 5/8
43. 05038 Gasket (2 required on V units)
44. 66250 Shroud—Rubber
45. 65863 Retainer
46. 67843 Screw—Pan Hd. #10-32 x 5/8 (Taptite)(4)*
47. 695 5" PSA Tapered Edge Pad
696 6" PSA Tapered Edge Pad
48. 35846 Retainer—Motor
49. 04056 Shroud—Vacuum
50. 35847 Retainer—Motor
51. 35234 Washer (4)*
52. 07251 Screw—Pan Hd. #10-32 x 1 (Taptite)(4)*
53. 585V 5" Backing Pad, Vacuum Type
53. 583V 6" Backing Pad, Vacuum Type
54. 64129 Housing—Muffler
55. 05049 Pad—Silencer
56. 04328 Spacer
57. 64131 Adapter—Intake
58. 14309 Ring—“O” (1/16 x 1/2 x 5/8)
59. 30463 Screen
60. 21541 Ring—Retainer
61. 63561 Ass’y—Exhaust Tube
62. 1376 Ass’y—Air Hose
63. 64130 Handle
64. 64124 Adapter—Intake (Long)
65. 64137 Adapter—Intake (Remote Exhaust)
Not Shown:
30605 Wrench 5/8
INSTRUCTIONS & PARTS LIST FOR
NO. 658, 660, 690, 697
SIOUX AIR RANDOM ORBITAL SANDER
INCLUDES B, V, VV, & X SUFFIXES
(SERIAL “E”)
4
Fig. Part
No. No. Description
1. 585V Vacuum Pad 5"
583V Vacuum Pad 6"
2. 07248 Screw—Pan Head #10-32 X 3/4 (Taptite)(4)*
3. 65863 Retainer—Motor
4. 65734 Shroud—Flexible
5. 14334 Ring—“O”(1/16 X 1 X 1-1/8)
6. 65742 Extractor
7. 14281 Ring—“O”(1/16 X 5/8 X 3/4)
8. 25206 Washer
9. 14309 Ring—“O”(1/16 X 1/2 X 5/8)
10. 64131 Adaptor—Intake (Includes Fig’s. 12, 14 & 15)
11. 30463 Screen
12. 21541 Ring—Retaining
13. 853 Hose—Dust Collection
14. 911A Ass’y—Disposable Dust Bag (Includes Fig’s. 14, 15, 17,
& [1 Only] Fig. 16)
65768 Bag—Outer
15. 65770 Washer
16. 912 Bag—Filter (Quantity of 5)
17. 65771 Clip
18. 21799 Ring—Retaining
** 65505 Cable Ties (Set of 4) (Not Shown)
Note:
To ensure maximum dust pick-up, periodic
cleaning of extractor & filter bag replace-
ment is required.
** Cable ties used to
secure supply hose to
vacuum hose if desired.
INSTRUCTIONS & PARTS LIST FOR
NO. 690VV, 697VV
(SERIAL “D”)
*Order Quantity As Required
1
2
3
4
5
6
7
8
18
9
10
11
12
16
17
15
14
13
5
NOTES
6
Printed In U.S.A.
El polvo generado al lijar, aserrar, afilar, taladrar y realizar otras tareas de construcción contiene
sustancias químicas que podrían causar cáncer, malformaciones congénitas y otras alteraciones del
aparato reproductor.
Some dust created by power sanding, sawing, grinding, drilling, and other construction activities
contains chemicals known to cause cancer, birth defects or other reproductive harm.

This manual suits for next models

3

Other Sioux Tools Tools manuals

Sioux Tools 8020ES Operation manual

Sioux Tools

Sioux Tools 8020ES Operation manual

Sioux Tools 5564A Specifications

Sioux Tools

Sioux Tools 5564A Specifications

Sioux Tools CN9BP Operation manual

Sioux Tools

Sioux Tools CN9BP Operation manual

Sioux Tools SCN3R Operation manual

Sioux Tools

Sioux Tools SCN3R Operation manual

Sioux Tools ST2L1410 Operation manual

Sioux Tools

Sioux Tools ST2L1410 Operation manual

Sioux Tools SC41011A User manual

Sioux Tools

Sioux Tools SC41011A User manual

Sioux Tools SCO10S Series User manual

Sioux Tools

Sioux Tools SCO10S Series User manual

Sioux Tools 65589 User manual

Sioux Tools

Sioux Tools 65589 User manual

Sioux Tools CN9P-4 Series Installation instructions

Sioux Tools

Sioux Tools CN9P-4 Series Installation instructions

Sioux Tools 872 User manual

Sioux Tools

Sioux Tools 872 User manual

Sioux Tools 2A2108BTC Operation manual

Sioux Tools

Sioux Tools 2A2108BTC Operation manual

Sioux Tools SR9A-25 Operation manual

Sioux Tools

Sioux Tools SR9A-25 Operation manual

Sioux Tools 270A Operation manual

Sioux Tools

Sioux Tools 270A Operation manual

Sioux Tools 2A2108BTCF Operation manual

Sioux Tools

Sioux Tools 2A2108BTCF Operation manual

Sioux Tools SCO7AX184 Operation manual

Sioux Tools

Sioux Tools SCO7AX184 Operation manual

Sioux Tools CN9BL Operation manual

Sioux Tools

Sioux Tools CN9BL Operation manual

Sioux Tools 1AM Series User manual

Sioux Tools

Sioux Tools 1AM Series User manual

Sioux Tools SSD4P Series Operation manual

Sioux Tools

Sioux Tools SSD4P Series Operation manual

Sioux Tools TP9A Series Operation manual

Sioux Tools

Sioux Tools TP9A Series Operation manual

Sioux Tools O2550 User manual

Sioux Tools

Sioux Tools O2550 User manual

Sioux Tools SZER4003LV Series Operation manual

Sioux Tools

Sioux Tools SZER4003LV Series Operation manual

Sioux Tools CH42A User manual

Sioux Tools

Sioux Tools CH42A User manual

Popular Tools manuals by other brands

BGS technic 74428 instruction manual

BGS technic

BGS technic 74428 instruction manual

PEM WO-100 User instructions

PEM

PEM WO-100 User instructions

Yost Vises 904-HV manual

Yost Vises

Yost Vises 904-HV manual

ATD Tools ATD-8645 owner's manual

ATD Tools

ATD Tools ATD-8645 owner's manual

SCHUNK GWB 34 Repair instructions

SCHUNK

SCHUNK GWB 34 Repair instructions

TSPROF K01RP instruction manual

TSPROF

TSPROF K01RP instruction manual

Costway ET1387US user manual

Costway

Costway ET1387US user manual

NovoPress KE KELIT ACO103 BT operating manual

NovoPress

NovoPress KE KELIT ACO103 BT operating manual

Tennant 9020747 Instruction bulletin

Tennant

Tennant 9020747 Instruction bulletin

WOODLAND SCENICS RG5162 instructions

WOODLAND SCENICS

WOODLAND SCENICS RG5162 instructions

SAMCHULLY BT Series instruction manual

SAMCHULLY

SAMCHULLY BT Series instruction manual

BGS technic 2832 instruction manual

BGS technic

BGS technic 2832 instruction manual

Legacy WorkForce L8250 owner's manual

Legacy

Legacy WorkForce L8250 owner's manual

Steelman PRO Wireless ChassisEAR2 instruction manual

Steelman

Steelman PRO Wireless ChassisEAR2 instruction manual

ReelCraft G 3050 operating instructions

ReelCraft

ReelCraft G 3050 operating instructions

Ripley UtilityTool SCS Series manual

Ripley

Ripley UtilityTool SCS Series manual

REMS Swing instruction manual

REMS

REMS Swing instruction manual

Milwaukee M12 Fuel Operator's manual

Milwaukee

Milwaukee M12 Fuel Operator's manual

manuals.online logo
manuals.online logoBrands
  • About & Mission
  • Contact us
  • Privacy Policy
  • Terms and Conditions

Copyright 2025 Manuals.Online. All Rights Reserved.