Sirona Intego User manual

pÉêîáÅÉ=j~åì~ä
MSKOMNR
fkqbdl=L=fkqbdl=éêç
kÉï=~ë=çÑW==
båÖäáëÜ
=
båÖäáëÜ
Service Manual DARWIN low/DARWIN high
0
S

64 57 316 D3543
2D3543.076.01.04.02 06.2015
Table of contents Sirona Dental Systems GmbH
Service Manual INTEGO / INTEGO pro
Table of contents
1Structure of the document........................................................................................ 7
1.1 Identification of danger levels........................................................................ 7
1.2 Formats and symbols used ........................................................................... 7
1.3 Symbols ........................................................................................................ 8
1.4 Abbreviations ................................................................................................ 9
2General safety information ....................................................................................... 10
2.1 Qualifications of service personnel ............................................................... 10
2.2 Power connection.......................................................................................... 10
2.3 Modifications and extensions of the system.................................................. 10
2.4 Radiotelephones ........................................................................................... 10
2.5 Electrostatic discharge .................................................................................. 11
2.6 Protective ground connection........................................................................ 11
2.7 EMC interference suppression...................................................................... 11
2.8 Operating the treatment center with HELIODENT Plus unit model............... 11
3Prerequisites ............................................................................................................ 12
4Technical data.......................................................................................................... 13
4.1 Operating, transport and storage conditions ................................................. 14
4.2 Weight and packaging................................................................................... 15
5Important information ............................................................................................... 16
5.1 Storage location for system- and user-specific data ..................................... 16
5.2 Installing the treatment center software ........................................................ 17
5.3 CAN BUS ...................................................................................................... 23
5.3.1 General ............................................................................................ 23
5.3.2 Measurements on the CAN BUS ..................................................... 24
5.4 S-COM .......................................................................................................... 25
5.4.1 General ............................................................................................ 25
5.4.2 Measurements on the S-COM bus................................................... 26
5.5 RS-485 .......................................................................................................... 27
5.5.1 General ............................................................................................ 27
5.5.2 Measurements on the RS-485 interface .......................................... 27
5.6 CAN, S-COM, and RS-485 wiring diagram ................................................... 28
5.7 Safety switches ............................................................................................. 29
5.8 Water heater in the water unit ....................................................................... 30

64 57 316 D3543
D3543.076.01.04.02 06.2015 3
Sirona Dental Systems GmbH Table of contents
Service Manual INTEGO / INTEGO pro
båÖäáëÜ
5.9 Overview of signal paths for camera control ................................................ 32
5.10 Acoustic feedback from the treatment center............................................... 32
5.11 Connecting the motors and turbines in the dentist element ......................... 35
5.12 Chair movement self-test ............................................................................. 39
6Overview of modules and boards............................................................................ 40
6.1 Locations of modules and boards ................................................................ 40
6.2 Patient chair ................................................................................................. 44
6.2.1 Locations of boards......................................................................... 44
6.2.2 DSA board – Patient chair control ................................................... 45
6.2.3 DSS board – DTC unit memory....................................................... 52
6.2.4 DSL board – LAN interface.............................................................. 53
6.2.5 Board DSU - USB-HUB chair.......................................................... 54
6.3 Dentist element ............................................................................................ 55
6.3.1 Locations of boards......................................................................... 55
6.3.2 DAB board – Dentist element control .............................................. 56
6.3.3 Board DAT - EasyPad..................................................................... 59
6.3.4 DAK Board - EasyTouch user interface .......................................... 61
6.3.5 DAR board – Relay module............................................................. 63
6.3.6 DAI board – Instrument light supply ................................................ 65
6.3.7 DAU1 board – USB HUB................................................................. 67
6.3.8 DAU2 board – USB HUB................................................................. 68
6.3.9 DAP board – Instrument control ...................................................... 69
6.3.10 Board DAPm - instrument control.................................................... 72
6.3.11 NAA board - Apex locator................................................................ 74
6.4 Water unit..................................................................................................... 76
6.4.1 Locations of boards......................................................................... 76
6.4.2 DWEm board compact water unit control........................................ 77
6.4.3 DWE board – Comfort water unit control......................................... 80
6.4.4 DWB board – Compact water unit control ....................................... 84
6.4.5 NWM board - Automatic tumbler filling............................................ 87
6.4.6 DWV board – Air Venturi, LEDview................................................. 88
6.4.7 DHI board – Instrument light supply ................................................ 89
6.5 Assistant element......................................................................................... 90
6.5.1 Locations of boards......................................................................... 90
6.5.2 NOP board - 5 V power supply ........................................................ 91
6.5.3 DHI board – Instrument light supply ................................................ 92
6.5.4 DHT board – Standard user interface.............................................. 93
6.6 LEDview ....................................................................................................... 94
6.6.1 NLV board - LEDview control.......................................................... 94
7Replacing components............................................................................................ 96

64 57 316 D3543
4D3543.076.01.04.02 06.2015
Table of contents Sirona Dental Systems GmbH
Service Manual INTEGO / INTEGO pro
7.1 General: ........................................................................................................ 96
7.2 Removing the cover ...................................................................................... 97
7.2.1 Patient chair ..................................................................................... 97
7.2.1.1 Removing the connection box cover ................................. 97
7.2.1.2 Removing the rear covers from the base of the chair ....... 97
7.2.1.3 Removing the localizer cover ............................................ 98
7.2.2 TS dentist element ........................................................................... 99
7.2.2.1 Removing the arm cover sections..................................... 99
7.2.2.2 Opening the dentist element ............................................. 101
7.2.3 CS dentist element........................................................................... 102
7.2.3.1 Removing the arm cover sections..................................... 102
7.2.3.2 Opening the CS dentist element ....................................... 104
7.2.4 Comfort assistant element ............................................................... 106
7.2.4.1 Removing covers............................................................... 106
7.2.5 Compact assistant element.............................................................. 108
7.2.5.1 Removing covers............................................................... 108
7.2.6 Comfort water unit............................................................................ 109
7.2.7 Compact water unit .......................................................................... 111
7.3 Replacing boards .......................................................................................... 113
7.3.1 Important information when replacing boards .................................. 113
7.3.2 Removing a board from the CS dentist element .............................. 113
7.3.3 Removing a board from the TS dentist element............................... 113
7.3.4 Board removal in the assistant element Compact............................ 114
7.4 Mechanical components ............................................................................... 117
7.4.1 Support arm brake ........................................................................... 117
7.5 Hydraulic/pneumatic modules ....................................................................... 118
7.5.1 Releasing the pressure in the water unit.......................................... 118
7.5.2 Mixing tank ....................................................................................... 118
7.5.3 Disinfectant tank............................................................................... 119
7.5.4 Replace SPRAYVIT, 3-way syringe and hoses ............................... 119
8Mechanical adjustments........................................................................................... 120
8.1 Adjusting the comfort assistant element brakes............................................ 120
8.2 Adjusting the brakes...................................................................................... 122
8.3 Adjusting the support arm and support column brakes on LEDview............. 123
8.4 Adjusting other joint brakes........................................................................... 124
8.5 Checking and setting brakes and spring force on the dentist element.......... 126
8.5.1 Checking the spring force of the flexible support arm ...................... 126
8.5.2 Setting the spring force of the flexible support arm.......................... 128
8.5.3 Adjusting the brakes......................................................................... 130
8.5.4 Removing/fitting panels on the support arm..................................... 131

64 57 316 D3543
D3543.076.01.04.02 06.2015 5
Sirona Dental Systems GmbH Table of contents
Service Manual INTEGO / INTEGO pro
båÖäáëÜ
9Diagnostic information............................................................................................. 135
9.1 Overview ...................................................................................................... 135
9.2 LED concept................................................................................................. 135
9.3 Function pad concept ................................................................................... 136
10 Service and configuration of the treatment center................................................... 137
10.1 Setup with EasyPad user interface .............................................................. 137
10.1.1 Standard EasyPad user interface.................................................... 137
10.1.2 Setting the time and date ................................................................ 138
10.1.3 Presetting the timer ......................................................................... 139
10.1.4 Setting the purging time for the purge function ............................... 139
10.1.5 Setting the purging time for the autopurge function ........................ 139
10.1.6 Adjusting the cleaning agent mixture for chemical suction hose
cleaning
140
10.1.7 Coupling suction to the 4-way foot switch. ...................................... 140
10.1.8 Switching afterblow on/off ............................................................... 140
10.1.9 Switching the key sound on/off........................................................ 141
10.2 Service settings with the EasyPad user interface ........................................ 141
10.2.1 Opening the Service domain........................................................... 141
10.2.2 Software version.............................................................................. 141
10.2.3 Display of the next maintenance due date ...................................... 141
10.2.4 Amalgam test .................................................................................. 142
10.2.5 Set the opening time of the cuspidor bowl valve ............................. 142
10.2.6 Assigning an instrument to holder 2................................................ 142
10.2.7 Assigning an instrument to holder 3................................................ 143
10.2.8 Assigning an instrument to holder 4................................................ 143
10.2.9 Assigning an instrument to holder 5................................................ 143
10.2.10 Safety switch test ............................................................................ 144
10.2.11 Fixed button and LED test............................................................... 144
10.2.12 Packing position .............................................................................. 144
10.2.13 Factory setting................................................................................. 145
10.3 Service settings with EasyTouch user interface........................................... 146
10.3.1 Opening the Service domain........................................................... 146
10.3.2 Entry dialog ..................................................................................... 147
10.3.2.1 Save to SD card ............................................................... 147
10.3.2.2 Amalgam separator test ................................................... 148
10.3.2.3 Calibrating the touchscreen.............................................. 148
10.3.2.4 Fixed button test............................................................... 148
10.3.2.5 Display service code list ................................................... 149
10.3.2.6 Display service information............................................... 149
10.3.3 Instrument allocation for tray 2 and 3 .............................................. 151
10.3.4 Instrument allocation for tray 4 and 5 .............................................. 151

64 57 316 D3543
6D3543.076.01.04.02 06.2015
Table of contents Sirona Dental Systems GmbH
Service Manual INTEGO / INTEGO pro
10.3.5 Default settings ................................................................................ 152
10.3.5.1 Set the opening time of the cuspidor bowl valve ............... 152
10.3.5.2 Display of the next maintenance due date ........................ 152
10.3.5.3 Packing position ................................................................ 152
10.3.5.4 Factory setting................................................................... 152
10.4 Reading service codes.................................................................................. 153
10.5 Service support with the PC.......................................................................... 153
10.6 PC connection, networking ........................................................................... 154
10.6.1 Control via SIUCOM plus /SIVISION connect................................. 154
11 Biofilm removal......................................................................................................... 155
11.1 Approved resources for biofilm removal........................................................ 155
11.2 Preparation.................................................................................................... 155
11.3 Execution ...................................................................................................... 157
11.4 Re-processing ............................................................................................... 159

64 57 316 D3543
D3543.076.01.04.02 06.2015 7
Sirona Dental Systems GmbH 1Structure of the document
Service Manual INTEGO / INTEGO pro 1.1Identification of danger levels
båÖäáëÜ
1Structure of the document
1.1 Identification of danger levels
To prevent personal injury and material damage, please observe the
warning and safety information provided in this document. Such
information is highlighted as follows:
Tip: Information on making work easier.
1.2 Formats and symbols used
The formats and symbols used in this document have the following
meaning:
DANGER
An imminent danger that could result in serious bodily injury or death.
WARNING
A possibly dangerous situation that could result in serious bodily injury
or death.
CAUTION
A possibly dangerous situation that could result in slight bodily injury.
NOTICE
A possibly harmful situation which could lead to damage of the product
or an object in its environment.
IMPORTANT
Application instructions and other important information.
Prerequisite
1. First action step
2. Second action step
or
➢ Alternative action
Result
➢Individual action step
Prompts you to do something.
see "Formats and symbols
used [ → 7]"
Identifies a reference to another text
passage and specifies its page
number.
● List Designates a list.
"Command/menu item" Indicates commands, menu items or
quotations.

64 57 316 D3543
8D3543.076.01.04.02 06.2015
1Structure of the document Sirona Dental Systems GmbH
1.3Symbols Service Manual INTEGO / INTEGO pro
1.3 Symbols
TS dentist element
CS dentist element
Assistant element Compact
Assistant element Comfort
Water unitCompact
Water unitComfort
Patient chair
Electrical foot control
Pneumatic foot switch
X-ray image viewer
LEDview

64 57 316 D3543
D3543.076.01.04.02 06.2015 9
Sirona Dental Systems GmbH 1Structure of the document
Service Manual INTEGO / INTEGO pro 1.4Abbreviations
båÖäáëÜ
LEDlight
1.4 Abbreviations
DE Dentist element
AK Connection box
ASE Assistant element
DTC Dental treatment center
BL Bootloader
BL motor Brushless motor
UI User interface
CS INTEGO with swivel arms
DLM Download manager
DNA Dürr wet suction system
DUMC Dental Unit Management Console
(PC program for service support)
EBL Extended bootloader
PCB Printed circuit board/board
FS Foot control
GND Ground
HW Hardware
L Cable
LED Light emitting diode
MV Solenoid valve
PC Personal computer
RÖBI X-ray image viewer
S Switch
SBL Standard bootloader
CH Patient chair
SW Software
TS INTEGO with hanging hoses
VDC DC voltage
WU Water unit
X Connector

64 57 316 D3543
10 D3543.076.01.04.02 06.2015
2General safety information Sirona Dental Systems GmbH
2.1Qualifications of service personnel Service Manual INTEGO / INTEGO pro
2General safety information
2.1 Qualifications of service personnel
Installation and startup may be carried out only by personnel specifically
authorized by Sirona.
2.2 Power connection
2.3 Modifications and extensions of the system
Modifications to this unit which might affect the safety of the system
owner, patients or other persons are prohibited by law.
For reasons of product safety, this product may be operated only with
original Sirona accessories or third-party accessories expressly approved
by Sirona. The user assumes the risk of using non-approved accessories.
If any devices not approved by Sirona are connected, they must comply
with the applicable standards, e.g.:
● IEC 60950-1 for data devices (e.g. PC, Ethernet Switch, Ethernet
Hub, Ethernet Converter, USB Repeater, Ethernet Router, USB
Switch, HDMI Repeater/Amplifier, audio sources, Display Port
Repeater/Amplifier etc. and their power supplies), as well as
● IEC 60601-1 for medical electrical equipment.
The treatment center monitor must fulfill the requirements of the
IEC 60950-1 standard.
The loudspeaker port of the monitor may be connected only to a device
that complies with IEC 60950-1 (e.g. a PC) or
IEC 60601-1. Under no circumstances may it be connected to a stereo
system or the like.
If a system is created during the installation process, the requirements of
IEC 60601-1, 3rd edition, must be fulfilled. The person assembling the
system assumes responsibility for ensuring conformity, e.g. acc. to
Directive 93/42/EEC.
2.4 Radiotelephones
Mobile RF communications equipment can affect electro-medical
equipment. Therefore, the use of mobile wireless phones in medical office
or hospital environments must be prohibited.
WARNING
Shock hazard
It is essential that you switch off the power supply PRIOR to beginning
the installation. There is a risk of electric shock. People can be injured
or electrical components of the unit destroyed.

64 57 316 D3543
D3543.076.01.04.02 06.2015 11
Sirona Dental Systems GmbH 2General safety information
Service Manual INTEGO / INTEGO pro 2.5Electrostatic discharge
båÖäáëÜ
2.5 Electrostatic discharge
Use an ESD wrist band. Connect it to the protective ground wire.
Please comply with the usual precautionary measures for handling
printed circuit boards (ESD). Make sure you touch a ground point to
discharge yourself prior to touching the components. Otherwise, electrical
components of the device can be destroyed.
2.6 Protective ground connection
The building water supply is at protective ground potential and must not
touch the electronics of the chair.
2.7 EMC interference suppression
GA131
2.8 Operating the treatment center with HELIODENT
Plus unit model
Shock hazard
NOTICE
Loss of device approval
The removal of interfering components (such as ferrite cores) leads to a
loss of device approval.
In addition, faults may occur on the dental treatment center and
neighboring electronic devices.
➢Do not remove any interfering components.
WARNING
Shock hazard
The HELIODENT Plus unit has its own mains supply.
This is the reason why mains voltage can exist in the distribution box
when the treatment center is switched off.

64 57 316 D3543
12 D3543.076.01.04.02 06.2015
3Prerequisites Sirona Dental Systems GmbH
Service Manual INTEGO / INTEGO pro
3Prerequisites
Always remember to take the following with you on customer visits:
● Service Manual
●SD card
The following manufacturers and cards were tested:
– Kingston 8GB, 16GB and 32GB
– Transcend 8GB, 16GB and 32GB
– SanDisk 8GB, 16GB and 32GB
– Verbatim 8GB, 16GB and 32GB
● Spare parts list
● Wiring diagrams
● Service notebook with DUMC
You will need the DUMC (Dental Unit Management Console) to read out/
display the service information on the service notebook and update the
treatment station software.
The LED displays and the function pads can also be used for fault
diagnosis. Nevertheless, the service codes of DUMC will provide more
detailed service information in most cases.
The technical documentation and product software are subject to
constant updates. Download the current versions from the dealer area of
the Sirona home page on a regular basis.
Always refer to the DUMC when performing service work.

64 57 316 D3543
D3543.076.01.04.02 06.2015 13
Sirona Dental Systems GmbH 4Technical data
Service Manual INTEGO / INTEGO pro
båÖäáëÜ
4Technical data
Model designation, power ratings
Unit classifications, without HF surgery
Year of manufacture
Minimum PC requirements
Model designation: INTEGO / INTEGO pro
Power connection: 100 – 240 V AC ± 10%
50/60 Hz
Rated current: 3.3 A–1.5 A at 100–240 V
also max. 6 A for external devices
Type of ground connection: TN-C-S system or TN-S system
(acc. to IEC 60364-1)
Overvoltage category: 2 acc. to IEC 60664-1
Average power consumption
(for dimensioning an air
conditioning system):
100 W
Power consumption when
switched off:
0 W (power switch present)
Main building fuse: Type B automatic circuit breaker
100 - 115 VAC: 20 A slow-blow
220 – 240 VAC: 16 A slow blow
Protection class: Class Idevice
Device class in accordance
with Directive 93/42/EEC:
Class IIa equipment
Degree of protection against
electrical shock:
Type B applied parts
External intraoral camera SiroCam F /
AF / AF+. Namely:
Applied part type BF
Degree of protection against
ingress of water:
Ordinary equipment (without protection
against ingress of water)
The foot switch has an IPX1 degree of
protection against liquids (drip-proof).
Year of manufacture:
(on the rating plate)
USB port: corresponds to USB 2.0 standard
IMPORTANT
Minimum requirements for PC
See document "Installation instructions and system requirements for PC
configuration," (REF 61 94 075 SIVISION digital.

64 57 316 D3543
14 D3543.076.01.04.02 06.2015
4Technical data Sirona Dental Systems GmbH
4.1Operating, transport and storage conditions Service Manual INTEGO / INTEGO pro
4.1 Operating, transport and storage conditions
Mode of operation
Operating and transport conditions
Load capacity of the patient chair
Media pressures and flow rates
Mode of operation Continuous operation with intermittent
loading corresponding to the dental
mode of working.
Drive motors for chair operation:
intermittent use, max. 2 minutes on and
18 minutes off
Permanently connected unit. Operation
is not permitted in mobile vehicles.
Transport and storage
conditions:
Temperature: -40 °C – +70 °C
(-40 °F – 158 °F)
Relative humidity: 10% – 95%
Air pressure: 500 hPa – 1,060 hPa
Operating conditions: Ambient temperature: 10 °C – 40 °C (50
°F – 104 °F)
Relative humidity: 30% – 85%
no condensation
Air pressure: 700 hPa – 1,060 hPa
Installation location: ≤ 3000 m above sea level
This treatment center is not suitable for
operation in areas subject to explosion
hazards.
Pollution degree: 2 acc. to IEC 60664-1
-40
+70 1060
500
95
10
+10
+40 1060
700
85
30
Load capacity of the patient
chair:
140 kg (308.6 lbs) or 185 kg (407.9 lbs),
depending on the model
The max. load capacity is indicated on a
sticker next to the rating plate of the
treatment center.
Local pressure (min./
max):For details see page
Requirements of the supply
media
Air: 5.5 / 7.5 bar
Water 2.5 / 6 bar
Suction air: pu min. 0.12 bar (1.7 psi),
max. 0.18 bar (2.6 psi)
≥ 500 l/min
Water flow:
For details see page
Requirements of the supply
media
Water absorption max. 3 l/min
Residual water max. 3 l/min

64 57 316 D3543
D3543.076.01.04.02 06.2015 15
Sirona Dental Systems GmbH 4Technical data
Service Manual INTEGO / INTEGO pro 4.2Weight and packaging
båÖäáëÜ
4.2 Weight and packaging
Weight, packaging
Weight (with packaging /
without packaging):
Dentist element
CS: 36 kg / 24 kg
TS: 37.2 kg / 24.5 kg
Assistant element
Comfort: 13.2 kg / 6.2 kg
Water unit
Compact: 52.2 kg / 42 kg
Comfort: 56.8 kg / 43 kg
Chair: 77.2 kg / 59 kg
Upholstery: 8.5 kg / 5.5 kg
LEDview: 12kg/8kg
Support column: 4.9 kg / 3.9 kg
Support column with monitor adapter:
6.4 kg / 5.6 kg
LEDlight: 13.7 kg / 9.9 kg
Support tube: 2.4 kg / 1.9kg
Support tube with monitor adapter: 5.6
kg / 4.6 kg
Accessories: 62.6 kg
Dimensions of the packaging Dentist element
CS: 120 cm x 80 cm x 88 cm
TS: 120 cm x 80 cm x 68 cm
Assistant element:
Comfort: 87 cm x 40 cm x 82 cm
Water unit: 82 cm x 56 cm x 116 cm
Chair: 165 cm x 63 cm x 68 cm
Upholstery: 80 cm x 60 cm x 36 cm
LEDview: 98 cm x 60 cm x 42 cm
LEDlight: 118 cm x 38 cm x 23 cm
Support tube for lamp without monitor
adapter: 128 cm x 20 cm x 20 cm
Support tube for lamp with monitor
adapter: 128 cm x 38 cm x 20 cm
There are 2 types of accessory boxes:
120 cm x 80 cm x 54/78 cm

64 57 316 D3543
16 D3543.076.01.04.02 06.2015
5Important information Sirona Dental Systems GmbH
5.1Storage location for system- and user-specific data Service Manual INTEGO / INTEGO pro
5Important information
5.1 Storage location for system- and user-specific
data
The treatment center features a central unit memory, which is
permanently connected to the center. Consequently, data does not have
to be backed up and written back if the board is replaced.
Composition of DTC data
The DTC data is made up of the operating data, the service log, the
device configurations, the DTC settings, and the dentist data.
DTC data General definition Example
Operating data Recorded operational periods, operating states
of service/maintenance-related functions, and
registered maintenance and service operations
Sanitation, purge and auto-purge
logs; lifting and backrest motor duty
cycles; amalgam separator filling
level; Sprayvit vent
Service log Service information from the "info", "warning",
"error" categories and user information (always
provided in conjunction with the time when it was
recorded)
Device configurations It is always the most recently detected
configuration that is saved. This consists of all
the boards that can be detected by the SW
(together with serial numbers and detectable
options/versions, where applicable)
Module (DWE, DAB, etc.), serial
numbers (treatment center, boards)
DTC settings All the settings for functions that are
independent of the dentist
MSBV opening time, IP address, etc.
Dentist data All the settings for functions that are dependent
on the dentist
Flushing time, tumbler filling time,
instrument setting, chair programs,
LED lamp, etc.
IMPORTANT
The DUMC displays service information only.

64 57 316 D3543
D3543.076.01.04.02 06.2015 17
Sirona Dental Systems GmbH 5Important information
Service Manual INTEGO / INTEGO pro 5.2Installing the treatment center software
båÖäáëÜ
5.2 Installing the treatment center software
Users can install the firmware via the PC program (DUMC) in two different
ways. They can either install it directly using the optionally available
Ethernet interface or they can copy it onto an SD card and then transfer
it to the treatment center.
Installing the software via a LAN
✔The treatment center is switched off.
✔The connection box cover on the patient chair has been removed
(see Removing the connection box cover [ → 97]).
1. Use an Ethernet cable to connect the service notebook to the RJ45
socket on the DSL board.
2. Switch the treatment center on.
For details of how to use the DUMC to install the latest firmware on the
treatment center directly via a LAN, please refer to the "Dental Unit
Management Console Service Manual" (DUMC) with order number
6194497.
IMPORTANT
During the software installation via LAN, no SD card with activated
download process may be inserted at system start.

64 57 316 D3543
18 D3543.076.01.04.02 06.2015
5Important information Sirona Dental Systems GmbH
5.2Installing the treatment center software Service Manual INTEGO / INTEGO pro
Software installation via SD card on EasyPad
For details of how to use the DUMC to prepare the SD card for the
software update process, please refer to the "Dental Unit Management
Console Service Manual" (DUMC) with order number 6194497.
✔The treatment center is switched off.
✔The connection box cover on the patient chair has been removed
(see Removing the connection box cover [ → 97]).
✔The SD card has been prepared for the firmware update process
using the DUMC.
1. Insert the SD card in the SD card slot on the DSA board.
2. Switch the treatment center on.
The SD card is detected.
The firmware update for the individual boards (nodes) has started
and is in progress.
dL.1: DSA
dL.2: DSL
dL.3: DAB
dL.4: DAP
dL.5: NAA
dL.6: DWE
dL.7: NLV
dL.8: DAK
The number after the text "dL." stands for the board ID. It does
not necessarily reflect the update order.
✔The firmware update has been successfully completed.
1. Remove the SD card.
2. Reattach the connection box cover.

64 57 316 D3543
D3543.076.01.04.02 06.2015 19
Sirona Dental Systems GmbH 5Important information
Service Manual INTEGO / INTEGO pro 5.2Installing the treatment center software
båÖäáëÜ
In case of an error
The update for the separate CAN nodes (DSA) could not be completed
successfully.
The treatment station software no. in the download request is invalid. The
download manager performs a reset.
A serious error has occurred during the download procedure. The update
process is terminated.
If the download for a specific CAN node (board) fails, the error displayed
in the margin column is shown. The number stands for the ID of the board
(in this example, board NAA) where the download failed.
Board IDs:
dL.Er.1: DSA
dL.Er.2: DSL
dL.Er.3: DAB
dL.Er.4: DAP
dL.Er.5: NAA
dL.Er.6: DWE
dL.Er.7: NLV
dL.Er.8: DAK
No valid associated application could be found. Unable to start the
download manager
A software inconsistency between a CAN board and the complete
software of the treatment center has occurred.
Board IDs:
Err.1: DSA
Err.2: DSL
Err.3: DAB
Err.4: DAP
Err.5: NAA
Err.6: DWE
Err.7: NLV
Err.8: DAK

64 57 316 D3543
20 D3543.076.01.04.02 06.2015
5Important information Sirona Dental Systems GmbH
5.2Installing the treatment center software Service Manual INTEGO / INTEGO pro
Software installation via SD card on EasyTouch
For details of how to use the DUMC to prepare the SD card for the
software update process, please refer to the "Dental Unit Management
Console Service Manual" (DUMC) with order number 6194497.
✔The treatment center is switched off.
✔The connection box cover on the patient chair has been removed
(see Removing the connection box cover [ → 97]).
✔The SD card has been prepared for the firmware update process
using the DUMC.
1. Insert the SD card in the SD card slot on the DSA board.
2. Switch the treatment center on.
Downloading the update files has started.
The updates of the individual boards are performed
consecutively.