Sizewise Bari Rehab Platform 3 Series User manual

1
User
Manual
BariRehabPlatform3™
8113
Rev.2.0
2/26/2021

2
Declaration of Conformity

3
Table of Contents
Declaration of Conformity.............................................................................................................. 1
Definitions and Symbols................................................................................................................. 6
Definitions................................................................................................................................... 6
Symbols....................................................................................................................................... 6
General Warnings and Safety Instructions ................................................................................. 8
Device Information ......................................................................................................................... 9
Description of the Bari Rehab Platform 3™............................................................................... 9
Bari Rehab Platform 3™ Specifications................................................................................... 10
Description of the SW Rest Secure System™ (RSS) ............................................................... 12
SW Rest Secure System™ Specifications ................................................................................ 13
RSS Control Module............................................................................................................. 13
RSS Hand Control................................................................................................................. 14
Description of the Power Drive ................................................................................................ 15
Power Drive Specifications....................................................................................................... 16
Unpacking and Set-Up Instructions .......................................................................................... 17
Unpacking/Parts Breakdown ................................................................................................ 17
Bed Set-Up............................................................................................................................ 18
Side Rail Set-Up ................................................................................................................... 21
Read and fully understand
operator’s manual before
using this device.
Failure to follow operating
instructions could result in
a serious in
j
ur
y
.

4
Bed Operating Instructions ....................................................................................................... 22
Hand Control......................................................................................................................... 22
RSS Operating Instructions....................................................................................................... 23
Hand Control......................................................................................................................... 23
Basic Set-Up ......................................................................................................................... 24
Bed Exit Alarm ..................................................................................................................... 24
Scale System: Zeroing the Scale........................................................................................... 25
Scale System: Adding/Removing Items ............................................................................... 25
Scale System: Weight History Time Setting ........................................................................ 26
Protocol: Set Alert Reminder................................................................................................ 26
Protocol Timer: Sound Level Setting ................................................................................... 27
Setting the Time/Date ........................................................................................................... 27
Bed Exit Alarm: Use Alarm.................................................................................................. 29
Scale System: Use Scale and Access Weight History .......................................................... 30
Protocol Timer: Using the Timer.......................................................................................... 31
Bed Exit Alarm: Set Alert Tones.......................................................................................... 31
Bed Exit Alarm: Record Message......................................................................................... 32
Scale System: Adjust Weight................................................................................................ 32
Scale System: Change LBS/KGS Setting............................................................................. 33
Scale System: Locking/Unlocking the Unit in LBS/KGS .................................................... 33
Power Drive Operating Instructions ......................................................................................... 34
Additional Driving Instructions ............................................................................................ 35
In Patient Cardiac Situation .................................................................................................. 35
Proper Use of the Bed ................................................................................................................... 36
Reaching or Leaning................................................................................................................. 36
Side Rails .................................................................................................................................. 37
Transfers ................................................................................................................................... 38
Features......................................................................................................................................... 39
Casters....................................................................................................................................... 39
Connection of Electrical Components ...................................................................................... 40
Expandable Bed Deck............................................................................................................... 41
IV Pole ...................................................................................................................................... 41
Manual Crank............................................................................................................................ 41
Power Drive Control ................................................................................................................. 42

5
Serial Number Location............................................................................................................ 42
Trapeze Assembly..................................................................................................................... 43
Trendelenburg Disabling .......................................................................................................... 44
Seven Zones of Bed Rail Entrapment........................................................................................... 45
Safety Tips .................................................................................................................................... 47
Electrical Leakage Test Point ................................................................................................... 47
Acceptable Levels of Leakage Current..................................................................................... 47
Electromagnetic Compatibility (EMC)..................................................................................... 47
Electromagnetic Interference (EMI) from Radio Wave Sources.............................................. 49
General Safety........................................................................................................................... 54
Pinch Point................................................................................................................................ 54
Transport................................................................................................................................... 55
Cleaning Instructions .................................................................................................................... 56
Laundry Instructions ................................................................................................................. 60
Optional Accessories ................................................................................................................ 61
Maintenance.................................................................................................................................. 62
Service/Replacement of Hand Control ..................................................................................... 63
Lubricating the Actuators ......................................................................................................... 63
Fasteners ................................................................................................................................... 64
Storage and Disposal................................................................................................................. 64
Troubleshooting ............................................................................................................................ 65
Bari Rehab Platform 3™ Troubleshooting ............................................................................... 65
SW Rest Secure System™ Troubleshooting ............................................................................ 66
Power Drive Troubleshooting................................................................................................... 67
Touchpad Flash Codes.......................................................................................................... 67
Warranty Information.................................................................................................................... 68
Limited Product Warranty .......................................................................................................... 68
Manufacturer Disclaimer .......................................................................................................... 72
User Assistance Information......................................................................................................... 73

6
Definitions and Symbols
Definitions
Throughout this manual different type fonts and symbols are used to aid user readability and
understanding of the content. Below are some examples.
Standard Text Used for regular information.
Bold Face Text Emphasizes a word or phrase.
NOTE SETS APART SPECIAL INFORMATION OR IMPORTANT
INSTRUCTION CLARIFICATION.
Symbols
Warnings/Cautions: This symbol is intended to alert the user to the presence of
important operating, maintenance or servicing instructions. Disregarding a warning
could result in patient and/or user injury as well as damage to equipment.
Electrical Shock Hazard Warning: This symbol is intended to alert the user to the
presence of electrical shock hazards. It’s important to follow all instructions and special
procedures to avoid electrical shock to the operator, care provider and/or patient.
Pinch Point Hazard Warning: This symbol is intended to alert the user to the
presence of a potential pinch point hazard. It’s important to follow all instructions and
special procedures to avoid patient and/or user injury as well as damage to equipment.
Follow Operating Instructions: Read Entire Manual Prior To Use.
Model
Information
Fuse
Specifications
ETL
Logo
Mode of Operation
Battery
Specification

7
Symbol for Type B applied parts indicating protection provided against
electrical shock.
The pinch point is spacing between movable parts of the
device which, in positions of normal use fail to maintain
a clearance of ≤8mm (0.315”) or ≥25mm (0.984”).
Protective Earth Terminal Grounding symbol. It is placed at the equipment earth
ground point and is mandatory for all grounded equipment.
AP- Anesthetics Proof
For medical equipment intended for use in ordinary locations but likely to be brought
into the operating or delivery room.
Located on the ECM
Located on the ECM
The hazards and warnings are
indicated on the shipping
container by this label.

8
General Warnings and Safety Instructions
WARNING: The bed is to be used in accordance with each facility’s policies and
procedures.
For user and patient safety, read and follow all warnings and instructions that apply to use of the
Bari Rehab Platform 3™. Before using this bed, the user must know what to do to ensure safety.
Put the patient at ease. The care provider should communicate with the patientby telling them
what they are planning to do.
Work with the patient’s doctor, nurse or therapist to learn safe methods best suited to the care
provider’s abilities and those of the patient.
Always use good posture and proper body mechanics. When possible use assistive safe patient
handling devices, if necessary to manually lift or support the patient, bend knees slightly and keep
back as upright and straight as possible.
Failure to follow the set-up instructions could result in patient or user injury as well as damage to
equipment or other property.
Use only parts, accessories and adapters authorized by the manufacturer.
Many of the screws and bolts used in the bed are special high-strength fasteners. Contact an
authorized Sizewise technician to assist in finding the correct fasteners. If improper fasteners are
used, they could result in patient and/or user injury as well as damage to equipment or other
property.
Only authorized personnel should engage in the troubleshooting process. Troubleshooting by
unauthorized persons could result in personal injury or equipment damage.
Do not attempt to install, perform maintenance, or use this product without first reading and
understanding these instructions and accompanying documents such as, the User Manual,
Technical Manual, and Work Instructions. If you do not understand these instructions, or
documents referenced, contact Sizewise at 1-800-814-9389.
Do not attempt to install, repair, or remove the trapeze,
single pole patient assist, or any other overhead components/devices
while bed is occupied.
Before positioning patient on bed, verify all components are secure after adjustments, repairs, or
servicing of the trapeze, single pole patient assist, or any other overhead components/devices.
Use only parts, accessories and adapters authorized by Sizewise.

9
Device Information
Description of the Bari Rehab Platform 3™
The Bari Rehab Platform 3™ is an electric bed. Its purpose is to support patients who have
problems requiring specialized positioning for their rehabilitation. The positioning nature of this
bed also provides care providers convenience in attending to the patients. The frame is constructed
entirely from metal and is adjustable in height from a low position of 15.75” (39 cm) to a high
position of 30” (76 cm). The frame is designed to support a safe working load of up to 1,000 lbs.
(453 kg). The bed is standard equipped with four 5” heavy-duty casters, headboard and footboard,
a manual emergency crank, four electric drive modules, a set of four side rails and a hand control.
Options include Trapeze, Line Management, O2 Holder, Pillow Speaker, Power Outlet (6), HL7
EMR Connectivity, IV Pole Holder and Low Air Loss Mattress.
Side Rails
Steering Casters
Mattress
Bed Deck
Bed Frame
Footboard Headboard
Brake Pedal
Rest Secure System
Hand Control
Braking Casters

10
Bari Rehab Platform 3™ Specifications
Quality Assurance Standards ............................................................................... IEC 60601
CSA C22.2 No. 601.1
IEC/EN 60601-2-52
IEC/EN 60601-1
IEC 60601-1-2
Degree of Protection Against Electric Shock ............................................................Type B
Degree of Protection Against Ingress of Water ............................................................ IPX4
Electrical Rating........................................................ 115VAC 60Hz, 7.6 amps (US model)
230VAC 50/60Hz, 7.6 amps (non-US models)
Duty Cycle .......................................................5 Min ON / 10 Min OFF Cycle (US model)
4 Min ON / 10 Min OFF Cycle (non-US models)
Fuses ........................................................................................................10 amp time delay
Overall Width – 39” / 99 cm .....................................................................41.5” / 105.5 cm
48” / 122 cm ...................................................................50.5” / 128.5 cm
Overall Length – 80” / 203 cm .........................................................................96” / 244 cm
86” / 218.5 cm ....................................................................102” / 259 cm
Length – Regular ..............................................................................84.5” / 215 cm
Extra Tall...........................................................................90.5” / 230 cm
(Between Head & Footboard)
Deck Low (without mattress).........................................................................15.75” / 39 cm
Deck High (without mattress).............................................................................30” / 76 cm
Trendelenburg.................................................................................................................. 15º
Reverse Trendelenburg ...................................................................................................-15º
Head Section .................................................................................................................... 64º
Knee Section .................................................................................................................... 35º
Foot Section ..................................................................................................................... 10º
(Angles have a ± 2º variance)
Under Bed Clearance .........................................................................................................8”
Bed Weight – .......................39” / 99 cm Expandable (48” / 122 cm) 560 lbs. / 254 kg.
(Weight depends on options on the bed)
Optional IV Pole Weight ...................................................................................3 lbs. / 1 kg.
Optional Trapeze Weight...............................................................................80 lbs. / 36 kg.

11
Safe Working Load – Bed........................................................................1000 lbs. / 453 kg.
Optional IV Pole................................................................50 lbs. / 22 kg.
Optional Trapeze ...........................................................850 lbs. / 385 kg.
(Exceeding these limits will void the warranty)
WARNING: Exceeding the weight capacity and/or safe working load listed in the
specifications could result in patient or user injury as well as damage to equipment
or other property.

12
Description of the SW Rest Secure System™ (RSS)
The purpose of the SW Rest Secure System™ (RSS) is to alert the care provider that a patient is
attempting to exit the bed or is in an immediate risk of falling in settings where continuous
surveillance of a patient is not possible. This is achieved by precisely monitoring a change in
patient position. When the patient makes an attempt to get out of bed an alarm will sound either
at the hand control or activate the nurse call signal.
The SW Rest Secure System™ also has an integrated scale that utilizes a transducer based system
to accurately record the weight of the patient while in the bed. It also has the capability to record
the weight automatically every day for 30 days at user-defined intervals.
Another feature is the protocol timer, which can be set for 1, 2 or 4 hours, to alert the care provider
that the patient needs attended to or checked on. It has the capability to alert the care provider by
an audible tone or activating the nurse call signal.

13
SW Rest Secure System™ Specifications
RSS Control Module
The RSS Control Module is located under the bed.
Housing
Material ............................................................................................... ABS, UL94-V0 rated
Width.............................................................................................................7.25” / 18.5 cm
Length .............................................................................................................3.25” / 8.5 cm
Thickness ...........................................................................................................2.00” / 5 cm
Connectors
Power ...............................................................................................2.1 mm Center Positive
Load Cell.............................................................................................................. 6 pin RJ12
Nurse Call ................................................................................................................ DB-15P
CAN Network ...................................................................................................... 6 pin RJ12
Nurse Call
Open..........................................................................................................................0 Ohms
Alarm .....................................................................................................................0.3 Ohms
Output ......................................................................................................0.206 VRMS Max
External Power
AC Adapter ...............................................................12.0 Volts DC, Medical Grade supply
Current .........................................................................................................800 mA, 1.25 A
Battery Power
Type ......................................................................................................................... 6V SLA
Capacity .....................................................................................................................3.5 AH
Recharge Time ....................................................................... fully discharged, 12-15 hours
Operating Time .................................................................................... (No Alarms) 8 hours
Operating Current
Normal .............................................................................................................. 300-450 mA
Charging....................................................................................................................600 mA
Alarming ...................................................................................................................320 mA
Weighing Function
Resolution ...................................................................................................... 1 lb. / 0.45 kg.
Weight Stability .......................................................................................................... ± 1 lb.
Averaging........................................................................................16 samples/ 1.6 seconds
WARNING: Any change to the specifications can result in malfunction or damage
to the SW Rest Secure System™.

14
RSS Hand Control
The RSS Hand Control is located on the footboard.
Housing
Material ............................................................................................... ABS, UL94-V0 rated
Width...............................................................................................................3.50” / 8.9 cm
Length ..............................................................................................................7.00” / 18 cm
Thickness ........................................................................................................1.75” / 4.5 cm
Connectors
CAN Network ...................................................................................................... 6 pin RJ11
Operating Current
Normal ................................................................................................................ 54-160 mA
Alarming ...................................................................................................................150 mA
Audio
Record Memory ...................................................................................................4 Megabits
Voice Record Alarm Time...................................................................................15 seconds
Sound Level ......................................................................... 90 dB @ 12 inches (30.48 cm)
Tones......................................................................................................... 5 selectable tones
Display
Type .......................................................................... LCD Graphic, blue LED backlighting
Size..................................................................................64 mm x 17.9 mm (2.52” x .705”)
Resolution ...............................................................................................................32 Pixels
Functions
Bed Exit Alarm Sensitivity Levels ............................................... Off, Low, Medium, High
Protocol Timer Alarm............................................................................... Off, 1, 2, 4 Hours
Sound Volumes............................................................................. Off, Low, Medium, High
Scale............................................................................................... 0-1000 lbs. / 0-453.5 kg.
Scale Accuracy*...................................................................................................... +/- 4 lbs.
*Scale accuracy can only be achieved by proper factory calibration.
WARNING: Any change to the specifications can result in malfunction or damage
to the SW Rest Secure System™.

15
Description of the Power Drive
The Power Drive 360 is an assistive device for the movement of the bariatric bed easing the
transport of patients. The device is battery powered to provide complete flexibility in transport
without the constraint of a power cord. The drive wheel is retractable to allow more traditional,
manual movement, when desired. It is set-up so that only the care provider is able to access the
controls. It is not intended, nor has the ability for the patient to use any mobility controls.
WARNING: Be sure to secure the patient before operating the power drive.
WARNING: Avoid feet in the path of the bed when using the power drive.
The power drive is powered by two 12V 26AH SLA (sealed lead acid) batteries. The drive
includes a charging system to recharge the batteries, when necessary. To charge the batteries,
plug the cord into a grounded or hospital grade outlet. A maximum charge time of 12 hours is
recommended, although a full charge may be complete in 2-4 hours.

16
Power Drive Specifications
The Power Drive is located on the patient head center of the bed.
Battery Power
Type ................................................................................. (2) 12V SLA (Sealed Lead Acid)
Capacity ......................................................................................................................26 AH
Recharge Time............................................................. (recommended maximum) 12 hours
Operating Time ........................................................................................................2 hours*
Operating Current
Normal ....................................................................................................................13 Amps
Charging................................................................................................................ 2.6 Amps
Alarming ................................................................. Battery Charge indicator on Touchpad
* Operating time may vary depending on the patient load and options the bed is equipped with.

17
Unpacking and Set-Up Instructions
Unpacking/Parts Breakdown
Inspect for any signs of freight damage. If obvious damage is detected, contact the freight
company and file a damage complaint. It may be necessary to take pictures of the damage. After
visual inspection make sure all of the proper components have been received.
Items enclosed in the box:
Bed Frame Head Section
Bed Frame Foot Section
Headboard
Footboard
Power Cord
Hand Control
Hand Crank
Side Rails with Mounts (4)
Foot Rail (Mattress Stop)
Power Drive
Information Packet
Assembly Bolts*
*The bed requires four bolts, two on each
side, as indicated (A) to connect the head
and the foot mainframe sections together.
The bolts must be 5/16”-18 x 2 1/2” long
Grade 8 Hex Head Cap Screws. There are
no exceptions or substitutions to this
requirement. Sizewise part number is
27001204.
Tools required for assembly:
Phillips Screwdriver
3/16” Allen Wrench
7/32” Allen Wrench
2-1/2” Combination Wrench
DO NOT discard any packing material until all components are accounted for and are in good
condition.
WARNING: Failure to follow the set-up instructions could result in patient or user
injury as well as damage to equipment or other property.

18
Bed Set-Up
1. Position both ends of the bed so that the sections are lined
up with each other.
2. Insert a 5/16”-18 x 2 1/2” long Grade 8 bolt (A) in the
bottom holes, 2 places. Lift both sections of the bed and
insert the brackets (B) on section A, behind the bolts on
section B. Slowly lower the two sections.
NOTE: For ease of assembly it may be necessary to have
two people assemble the bed.
3. Install the 5/16”-18 x 2 1/2” long Grade 8 bolts (C)
through the top holes on the brackets to lock the two
sections together. Install and tighten the nuts on the 4
bolts.
WARNING: Failure to securely fasten the
four bolts in place during bed set-up could
result in patient or user injury as well as
damage to equipment or other property.
4. Locate the headboard and footboard; mount them on their respective posts.
The headboard mount should be bolted onto the
bed frame on the outer receptacles.
The footboard mount should be bolted onto the bed
frame on the inner receptacles.

19
5. Locate the electrical connectors in the middle of the bed frame and
insert them together.
6. Next, plug the small modular connectors into the black
box mounted on the center frame.
7. Locate the Electronic Control Module (ECM) at the head end of the
bed. Connect the hospital grade power cord provided and the hand
control cord to the ECM.
8. The hand control for the bed is routed to the center of the bed and
should be routed to exit the bed either on the left or the right side,
hanger hooks are provided to secure the cable from the floor.
9. Install the mattress stop bar/rail.
Carefully remove the protective covering from the mattress. Slide
the mattress onto the bed frame.
NOTE: DO NOT use a sharp object to cut protective covering on
the mattress as you may damage the mattress covering.

20
10. Position the bed at least 12” (30.5 cm) from any walls. This will prevent any damage to the
walls while the bed is in movement.
11. Lock the casters into their proper position as indicated by the stickers located near the
casters on the bed.
NOTE: This step is imperative. The bed may fail if the casters are not placed in the proper
position prior to use.
12. Plug the bed into a grounded or hospital grade outlet.
Locate the “ON/OFF switch on the ECM and switch it to
the “ON” position.
WARNING: To avoid electrical shock when plugging this bed into the wall outlet,
only use grounded or hospital grade outlets.
WARNING: Follow EMC guidelines and safety precautions when the bed is
connected to powered source (page 47).
Radio wave sources such as radio stations, TV stations, amateur radio (HAM)
transmitters, two-way radios and cellular phones can affect this bed. Following
the warnings listed for electromagnetic interference should reduce the chance of
the bed’s unintended movement that could result in serious injury.
On/Off Switch