Skil 2148 User manual

CORDLESS SCREWDRIVER
2148 (F0152148 . . )
ME77
SKIL Europe BV - Konijnenberg 60 11/08 2610396335
4825 BD Breda - The Netherlands
www.skileurope.com
ORIGINAL INSTRUCTIONS . . . . . 4
NOTICE ORIGINALE . . . . . . . . . . . 7
ORIGINALBETRIEBS-
ANLEITUNG . . . . . . . . . . . . . . . . 12
ORIGINELE
GEBRUIKSAANWIJZING . . . . . . 17
BRUKSANVISNING I ORIGINAL . 21
ORIGINAL BRUGSANVISNING . 25
ORIGINAL DRIFTSINSTRUKS . . 29
ALKUPERÄISET OHJEET . . . . . 32
MANUAL ORIGINAL . . . . . . . . . . 36
MANUAL ORIGINAL . . . . . . . . . . 41
ISTRUZIONI ORIGINALI . . . . . . . 45
EREDETI HASZNÁLATI
UTASÍTÁS . . . . . . . . . . . . . . . . . . 50
PÒVODNÍM NÁVODEM
K POUÎÍVÁNÍ . . . . . . . . . . . . . . . 54
OR‹J‹NAL ‹fiLETME TAL‹MATI. . 58
INSTRUKCJÑ ORYGINALNÑ . . . 62
ОРИГИНАЛНЬОЕ РУКОВОДСТВО
ПО ЭКСПЛУАТАЦИИ . . . . . . . . . 66
ОРИГІНАЛЬНА ІНСТРУКЦІЯ
З ЕКСПЛУАТАЦІЇ. . . . . . . . . . . . . 72
ΠΡΩΤΟΤΥΠΟ Ο∆ΗΓΙΩΝ
ΧΡΗΣΗΣ . . . . . . . . . . . . . . . . . . . 77
INSTRUCØIUNI DE FOLOSIRE
ORIGINALE . . . . . . . . . . . . . . . . . 82
ОРИГИНАЛНО РЪКОВОДСТВО
ЗА ЕКСПЛОАТАЦИЯ . . . . . . . . . 86
PÔVODN¯ NÁVOD
NA POUÎITIE . . . . . . . . . . . . . . . 92
ORIGINALNE UPUTE ZA RAD . . 96
ORIGINALNO UPUTSTVO
ZA RAD . . . . . . . . . . . . . . . . . . . 100
IZVIRNA NAVODILA. . . . . . . . . 104
ALGUPÄRANE
KASUTUSJUHEND. . . . . . . . . . 108
ORI˛INÅLÅ LIETO·ANAS
PAMÅC±BA . . . . . . . . . . . . . . . . 111
ORIGINALI INSTRUKCIJA . . . . 116
GB
F
D
NL
S
DK
N
FIN
E
P
I
H
CZ
TR
PL
RU
UA
GR
RO
BG
SK
HR
SRB
SLO
EST
LV
LT

2
1
A
B
C
23
4
5a
2148 (NiMH)
180
5 mm
5 hours
5b
5c
4,8
Volt 0,4 kg
EPTA 01/2003

3
NiMH
6 7
8 9
0 ! PHILLIPS
POZIDRIV
SLOTTED
TORX
#@

4
GB
Cordless screwdriver 2148
INTRODUCTION
• This tool with left/right rotation is
intended for screwdriving in wood
• Read and save this instruction
manual 3
TECHNICAL SPECIFICATIONS 1
Max. torque for hard screwdriving
application according to ISO 5393: 7 Nm
TOOL ELEMENTS 2
ASwitch for on/off
BSwitch for changing direction of
rotation
CBitholder
SAFETY
GENERAL SAFETY INSTRUCTIONS
WARNING! Read all safety warnings
and all instructions. Failure to follow the
warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for
future reference. The term “power tool”
in the warnings refers to your mains-
operated (corded) power tool or battery-
operated (cordless) power tool.
1)WORK AREA SAFETY
a) Keep work area clean and well lit.
Cluttered or dark areas invite
accidents.
b)Do not operate power tools in
explosive atmospheres, such as in
the presence of flammable liquids,
gases or dust. Power tools create
sparks which may ignite the dust or
fumes.
c) Keep children and bystanders away
while operating a power tool.
Distractions can cause you to lose
control.
2)ELECTRICAL SAFETY
a) Power tool plugs must match the
outlet. Never modify the plug in any
way. Do not use any adapter plugs
with earthed (grounded) power
tools. Unmodified plugs and matching
outlets will reduce risk of electric
shock.
b)Avoid body contact with earthed or
grounded surfaces such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric
shock if your body is earthed or
grounded.
c) Do not expose power tools to rain
or wet conditions. Water entering a
power tool will increase the risk of
electric shock.
d)Do not abuse the cord. Never use
the cord for carrying, pulling or
unplugging the power tool.
Keep cord away from heat, oil,
sharp edges or moving parts.
Damaged or entangled cords increase
the risk of electric shock.
e) When operating a power tool
outdoors, use an extension cord
suitable for outdoor use. Use of a
cord suitable for outdoor use reduces
the risk of electric shock.
f) If operating a power tool in a damp
location is unavoidable, use an
earth leakage circuit breaker. Use of
an earth leakage circuit breaker
reduces the risk of electric shock.
3)PERSONAL SAFETY
a) Stay alert, watch what you are doing
and use common sense when
operating a power tool. Do not use
a power tool while you are tired or
under the influence of drugs,
alcohol or medication. A moment of
inattention while operating power tools
may result in serious personal injury.
b)Use personal protective equipment.
Always wear eye protection.
Protective equipment such as dust
mask, non-skid safety shoes, hard hat,
or hearing protection used for
appropriate conditions will reduce
personal injuries.

5
c) Prevent unintentional starting.
Carrying power tools with your finger
on the switch or energising power
tools that have the switch on invites
accidents.
d)Remove any adjusting key or
wrench before turning the power
tool on. A wrench or a key left
attached to a rotating part of the
power tool may result in personal
injury.
e) Do not overreach. Keep proper
footing and balance at all times.
This enables better control of the
power tool in unexpected situations.
f) Dress properly. Do not wear loose
clothing or jewellery. Keep your
hair, clothing and gloves away from
moving parts. Loose clothes,
jewellery or long hair can be caught in
moving parts.
g)If devices are provided for the
connection of dust extraction and
collection facilities, ensure these
are connected and properly used.
Use of dust collection can reduce
dust-related hazards.
4)POWER TOOL USE AND CARE
a) Do not force the power tool.
Use the correct power tool for your
application. The correct power tool
will do the job better and safer at the
rate for which it was designed.
b)Do not use the power tool if the
switch does not turn it on and off.
Any power tool that cannot be
controlled with the switch is
dangerous and must be repaired.
c) Ensure the switch is in the off
position before making any
adjustments, changing accessories,
or storing power tools.
Such preventive safety measures
reduce the risk of starting the power
tool accidentally.
d)Store idle power tools out of the
reach of children and do not allow
persons unfamiliar with the power
tool or these instructions to operate
the power tool. Power tools are
dangerous in the hands of untrained
users.
e) Maintain power tools. Check for
misalignment or binding of moving
parts, breakage of parts and any
other condition that may affect the
power tool’s operation. If damaged,
have the power tool repaired before
use. Many accidents are caused by
poorly maintained power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to
bind and are easier to control.
g)Use the power tool, accessories
and tool bits etc., in accordance
with these instructions, taking into
account the working conditions and
the work to be performed. Use of the
power tool for operations different
from those intended could result in a
hazardous situation.
5)BATTERY TOOL USE AND CARE
a) Recharge only with the charger
specified by the manufacturer.
A charger that is suitable for one type
of battery pack may create a risk of
fire when used with another battery
pack.
b)Under abusive conditions, liquid
may be ejected from the battery;
avoid contact. If contact
accidentally occurs, flush with
water. If liquid contacts eyes,
additionally seek medical help.
Liquid ejected from the battery may
cause irritation or burns.
6)SERVICE
a) Have your power tool serviced by a
qualified repair person using only
identical replacement parts. This will
ensure that the safety of the power
tool is maintained.
SAFETY INSTRUCTIONS FOR
CORDLESS SCREWDRIVERS
• Avoid damage that can be caused by
screws, nails and other elements in
your workpiece; remove them before
you start working
• Always check that the supply voltage
is the same as the voltage indicated
on the nameplate of the charger
(chargers with a rating of 230V or 240V
can also be connected to a 220V
supply)

6
• In case of electrical or mechanical
malfunction, immediately switch off
the tool or unplug charger from power
source
• SKIL can assure flawless functioning
of the tool only when original
accessories are used
• The tool/charger is not intended for
use by persons (including children)
with reduced physical, sensory or
mental capabilities, or lack of
experience and knowledge, unless
they have been given supervision or
instruction concerning use of the tool/
charger by a person responsible for
their safety
• Ensure that children do not play with
the tool/charger
• Be careful not to drive into areas
where electrical wires may be
contacted
• Ensure that switch B 2is in the
middle (locking) position before
making any adjustments or changing
accessories as well as when carrying
or storing the tool
CHARGING/BATTERIES
• Charge battery only with the charger
that is supplied with the tool
• Do not expose tool/charger to rain
• Never charge battery outdoors 4
• Store tool/charger in locations where
temperature will not exceed 40°C or
drop below 0°C
• Batteries may explode when disposed
of in fire, so do not burn battery for
any reason
• Do not use charger when cord or plug
is damaged; cord or plug should be
replaced immediately at one of the
officially registered SKIL Service
Stations
• Do not disassemble charger or tool
• Do not attempt to recharge non-
rechargeable batteries
USE
• Charging battery 5
- battery of new tools is not fully
charged
- after approximately 5 hours the
battery is fully charged
! unplug the charger from the tool
after charging period has ended
thereby lengthening the service
life of the battery
IMPORTANT:
- while charging, the charger and the
battery may become warm to touch;
this is normal and does not indicate
a problem
- do not charge at temperatures
below 0°C and over 40°C; this will
seriously damage the battery as well
as the charger
! a battery that is new or has not
been used for a longer period
does not develop its full capacity
until after approximately 5
charging/discharging cycles
- do not repeatedly recharge the
battery after only a few minutes of
operation; this may result in a
reduction of operating time and
battery efficiency
- the battery must be kept separate
from the natural environment and
should not be disposed of as normal
domestic waste (symbol 6will
remind you of this when the need for
disposing occurs)
! prior to disposal protect battery
terminals with heavy tape to
prevent short-circuit
- if you anticipate long periods of non-
use for the tool, it is best to unplug
the charger from its power source
• On/off 7
• Changing direction of rotation 8
- when not properly set in left/right
position, switch A 2cannot be
activated
! change direction of rotation only
when tool is at a complete
standstill
• Changing bits 9
- push bit to end position in bitholder
! do not use bits with a damaged
shank
• Automatic spindle-lock
Allows you to manually tighten or
loosen screws, when necessary 0
APPLICATION ADVICE
• Use the appropriate bits !
! do not use damaged bits

7
! only use bits with hexagon shaft
• When turning in a screw at/near the
cross cut end or an edge of wood,
pre-drill a hole in order to avoid
cracking of the wood
• For an optimal use of the tool a steady
pressure on the screw is required,
especially while removing
• When screwdriving in hard wood one
should pre-drill a hole
• For more tips see
www.skileurope.com
• Vibration level
The vibration emission level stated at
the back of this instruction manual has
been measured in accordance with a
standardised test given in EN 60745; it
may be used to compare one tool with
another and as a preliminary
assessment of exposure to vibration
when using the tool for the
applications mentioned
- using the tool for different
applications, or with different or
poorly maintainted accessories, may
significantly increase the exposure
level
- the times when the tool is switched
off or when it is running but not
actually doing the job, may
significantly reduce the exposure
level
! protect yourself against the
effects of vibration by maintaining
the tool and its accessories,
keeping your hands warm, and
organizing your work patterns
MAINTENANCE / SERVICE
• Keep tool and charger clean
- clean charging contacts in charger
with alcohol or contact cleaner
! unplug charger from power
source before cleaning
• If the tool/charger should fail despite
the care taken in manufacturing and
testing procedures, repair should be
carried out by an after-sales service
centre for SKIL power tools
- send the tool or charger
undismantled together with proof of
purchase to your dealer or the
nearest SKIL service station
(addresses as well as the service
diagram of the tool are listed on
www.skileurope.com)
ENVIRONMENT
• Do not dispose of electric tools,
batteries, accessories and
packaging together with household
waste material (only for EU countries)
- in observance of European Directive
2002/96/EC on waste of electric and
electronic equipment and its
implementation in accordance with
national law, electric tools that have
reached the end of their life must be
collected separately and returned to
an environmentally compatible
recycling facility
- symbol @will remind you of this
when the need for disposing occurs
! remove the batteries before
disposal of the tool #
F
Tournevis sans fil 2148
INTRODUCTION
• Cet outil avec rotation à droite/gauche
est conçu pour le vissage au bois
• Lisez et conservez ce manuel
d’instructions 3
SPECIFICATIONS TECHNIQUES 1
Couple max. vissage dur suivant
ISO 5393: 7 Nm
ELEMENTS DE L’OUTIL 2
AInterrupteur pour mise en marche/arrêt
BCommutateur pour inverser le sens de
rotation
CPorte-embout

122
08 SKIL Europe B.V. A. v.d. Kloot
CE DECLARATION OF CONFORMITY We declare under our sole
responsibility that this product is in conformity with the following standards or
standardized documents: EN 60 335, EN 60 745, EN 55 014, in accordance
with the provisions of the directives 2006/95/EC, 2004/108/EC, 98/37/EC
(until Dec. 28, 2009), 2006/42/EC (from Dec. 29, 2009 on).
NOISE/VIBRATION Measured in accordance with EN 60 745 the sound
pressure level of this tool is < 70 dB(A) (standard deviation: 3 dB) and the
vibration < 2,5 m/s2(hand-arm method; uncertainty K = 1,5 m/s2).
Technical file at: SKIL Europe BV (PT-SEU/PJE), 4825 BD Breda, NL.
GB
CE DÉCLARATION DE CONFORMITÉ Nous déclarons sous notre propre
responsabilité que ce produit est en conformité avec les normes ou
documents normalisés suivants: EN 60 335, EN 60 745, EN 55 014, conforme
aux réglementations 2006/95/CE, 2004/108/CE, 98/37/CE (jusqu’au
28.12.2009), 2006/42/CE (à partir du 29.12.2009).
BRUIT/VIBRATION Mesuré selon EN 60 745 le niveau de la pression sonore
de cet outil est < 70 dB(A) (déviation standard: 3 dB) et la vibration < 2,5 m/s2
(méthode main-bras; incertitude K = 1,5 m/s2).
Dossier technique auprès de: SKIL Europe BV (PT-SEU/PJE),
4825 BD Breda, NL.
CE KONFORMITÄTSERKLÄRUNG Wir erklären in alleiniger Verantwortung,
daß dieses Produkt mit den folgenden Normen oder normativen Dokumenten
übereinstimmt: EN 60 335, EN 60 745, EN 55 014, gemäß den
Bestimmungen der Richtlinien 2006/95/EG, 2004/108/EG, 98/37/EG
(bis 28.12.2009), 2006/42/EG (ab 29.12.2009).
GERÄUSCH/VIBRATION Gemessen gemäß EN 60 745 beträgt der
Schalldruckpegel dieses Gerätes < 70 dB(A) (Standard- abweichung: 3 dB)
und die Vibration < 2,5 m/s2(Hand-Arm Methode; unsicherheit K = 1,5 m/s2).
Technische Unterlagen bei: SKIL Europe BV (PT-SEU/PJE),
4825 BD Breda, NL.
CE CONFORMITEITSVERKLARING Wij verklaren, dat dit product voldoet
aan de volgende normen of normatieve documenten: EN 60 335, EN 60 745,
EN 55 014, overeenkomstig de bepalingen van de richtlijnen 2006/95/EG,
2004/108/EG, 98/37/EG (tot 28-12-2009), 2006/42/EG (vanaf 29-12-2009).
GELUID/VIBRATIE Gemeten volgens EN 60 745 bedraagt het
geluidsdrukniveau van deze machine < 70 dB(A) (standaard deviatie: 3 dB)
en de vibratie < 2,5 m/s2(hand-arm methode; onzekerheid K = 1,5 m/s2).
Technisch dossier bij: SKIL Europe BV (PT-SEU/PJE), 4825 BD Breda, NL.
CE KONFORMITETSFÖRKLARING Vi intygar och ansvarar för, att denna
produkt överensstämmer med följande norm och dokument: EN 60 335,
EN 60 745, EN 55 014, enl. bestämmelser och riktlinjema 2006/95/EG,
2004/108/EG, 98/37/EG (till 28.12.2009), 2006/42/EG (from 29.12.2009).
LJUD/VIBRATION Ljudtrycksnivån som uppmätts enligt EN 60 745 är på
denna maskin < 70 dB(A) (standard deviation: 3 dB) och vibration
< 2,5 m/s2(hand-arm metod; onoggrannhet K = 1,5 m/s2).
Teknisk tillverkningsdokumentation finns hos: SKIL Europe BV
(PT-SEU/PJE), 4825 BD Breda, NL.
F
D
NL
S

123
08 SKIL Europe B.V. A. v.d. Kloot
CE TODISTUS STANDARDINMUKAISUUDESTA Todistamme täten ja
vastaamme yksin siitä, että tämä tuote en allalueteltujen standardien ja
standardoimisasiakirjojen vaatimusten mukainen EN 60 335, EN 60 745,
EN 55 014, seuraavien sääntöjen mukaisesti 2006/95/EY, 2004/108/EY,
98/37/EY (28.12.2009 asti), 2006/42/EY (29.12.2009 alkaen).
MELU/TÄRINÄ Mitattuna EN 60 745 mukaan työkalun melutaso on
< 70 dB(A) (keskihajonta: 3 dB) ja tärinän voimakkuus < 2,5 m/s2(käsi-
käsivarsi metodi; epävarmuus K = 1,5 m/s2).
Tekninen tiedosto kohdasta: SKIL Europe BV (PT-SEU/PJE),
4825 BD Breda, NL.
CE DECLARACION DE CONFORMIDAD Declaramos bajo nuestra sola
responsabilidad que este producto está en conformidad con las normas o
documentos normalizados siguientes: EN 60 335, EN 60 745, EN 55 014,
de acuerdo con las regulaciones 2006/95/CE, 2004/108/CE, 98/37/CE
(hasta el 28.12.2009), 2006/42/CE (a partir del 29.12.2009).
RUIDOS/VIBRACIONES Medido según EN 60 745 el nivel de la presión
acústica de esta herramienta se eleva a < 70 dB(A) (desviación estándar: 3 dB)
y la vibración a < 2,5 m/s2(método brazo-mano; incertidumbre K = 1,5 m/s2).
Expediente técnico en: SKIL Europe BV (PT-SEU/PJE), 4825 BD Breda, NL.
CE DECLARAÇÃO DE CONFIRMIDADE Declaramos sob nossa exclusiva
responsabilidade que este producto cumpre as seguintes normas ou
documentos normativos: EN 60 335, EN 60 745, EN 55 014, conforme as
disposições das directivas 2006/95/CE, 2004/108/CE, 98/37/CE
(até 28.12.2009), 2006/42/CE (a partir de 29.12.2009).
RUÍDO/VIBRAÇÕES Medido segundo EN 60 745 o nível de pressão acústica
desta ferramenta é < 70 dB(A) (espaço de erro: 3 dB) e a vibração
< 2,5 m/s2(método braço-mão; incerteza K = 1,5 m/s2).
Processo técnico em: SKIL Europe BV (PT-SEU/PJE), 4825 BD Breda, NL.
CE SAMSVARSERKLÆRING Vi erklærer at det er under vårt ansvar at dette
produkt er i samsvar med følgende standarder eller standard- dokumenter:
EN 60 335, EN 60 745, EN 55 014, i samsvar med reguleringer 2006/95/EF,
2004/108/EF, 98/37/EF (frem til 28.12.2009), 2006/42/EF (fra 29.12.2009).
STØY/VIBRASJON Målt ifølge EN 60 745 er lydtrykknivået av dette verktøyet
< 70 dB(A) (standard deviasjon: 3 dB) og vibrasjonsnivået < 2,5 m/s2(hånd-
arm metode; usikkerhet K = 1,5 m/s2).
Tekniske underlag hos: SKIL Europe BV (PT-SEU/PJE), 4825 BD Breda, NL.
N
FIN
E
P
CE KONFORMITETSERKLÆRING Vi erklærer under almindeligt ansvar, at
dette produkt er i overensstemmelse med følgende normer eller normative
dokumenter: EN 60 335, EN 60 745, EN 55 014, i henhold til bestemmelserne
i direktiverne 2006/95/EF, 2004/108/EF, 98/37/EF (indtil 28.12.2009),
2006/42/EF (fra 29.12.2009).
STØJ/VIBRATION Måles efter EN 60 745 er lydtrykniveau af dette værktøj
< 70 dB(A) (standard deviation: 3 dB) og vibrationsniveauet < 2,5 m/s2(hånd-
arm metoden; usikkerhed K = 1,5 m/s2).
Teknisk dossier hos: SKIL Europe BV (PT-SEU/PJE), 4825 BD Breda, NL.
DK

124
08 SKIL Europe B.V. A. v.d. Kloot
OÂWIADCZENIE ZGODNOÂCI CE Niniejszym oÊwiadczamy ponoszàc
osobistà odpowiedzialnoÊç, ˝e produkt wykonany jest zgodnie z
nast´pujàcymi normami i dokumentami normalizujàcymi: EN 60 335,
EN 60 745, EN 55 014, z godnie z wytycznymi 2006/95/EU, 2004/108/EU,
98/37/EU (do 28.12.2009), 2006/42/EU (od 29.12.2009).
HA¸ASU/WIBRACJE Pomiarów dokonano zgodnie z normà EN 60 745
ciÊnienie akustyczne narz´dzia wynosi < 70 dB(A) (poziom odchylenie: 3 dB),
zaÊ wibracje < 2,5 m/s2(metoda d∏oƒ-r´ka; b∏àd pomiaru K = 1,5 m/s2).
Dokumentacja techniczna: SKIL Europe BV (PT-SEU/PJE),
4825 BD Breda, NL.
PL
CE STRVZUJÍCÍ PROHLÅ◊ENÍ Potvrzujeme na odpovπdnost, Ωe tento
v¥robek odpovídå nåsledujícím normåm nebo normativním podkladüm:
EN 60 335, EN 60 745, EN 55 014, podle ustanovení smπrnic 2006/95/ES,
2004/108/ES, 98/37/ES (do 28.12.2009), 2006/42/ES (od 29.12.2009).
HLUÇNOSTI/VIBRACÍ Mπ®eno podle EN 60 745 çiní tlak hlukové vlny tohoto
p®ístroje < 70 dB(A) (standardní odchylka: 3 dB) a vibrací < 2,5 m/s2(metoda
ruka-paΩe; nepfiesnost K = 1,5 m/s2).
Technická dokumentace u: SKIL Europe BV (PT-SEU/PJE),
4825 BD Breda, NL.
CE STANDARDIZASYON BEYANI Ye¤ane sorumlu olarak, bu ürünün
afla¤ıdaki standartlara veya standart belgelerine uygun oldu¤unu beyan
ederiz: EN 60 335, EN 60 745, EN 55 014, yönetmeli¤i hükümleri uyarınca
2006/95/EG, 2004/108/EG, 98/37/EG (28.12.2009 tarihine kadar),
2006/42/EG (29.12.2009 tarihinden itibaren).
GÜRÜLTÜ//T‹TREfiIM Ölçülen EN 60 745 göre ses basıncı bu makinanın
seviyesi < 70 dB(A) (standart sapma: 3 dB) ve titreflim < 2,5 m/s2(el-kol
metodu; tolerans K = 1,5 m/s2).
Teknik belgelerin bulundu¤u merkez: SKIL Europe BV (PT-SEU/PJE),
4825 BD Breda, NL.
CZ
TR
CE DICHIARAZIONE DI CONFORMITÀ Dichiaramo, assumendo la piena
responsabilità di tale dichiarazione, che il prodotto è conforme alle seguenti
normative e ai relativi documenti: EN 60 335, EN 60 745, EN 55 014 in base
alle prescrizioni delle direttive 2006/95/EG, 2004/108/EG, 98/37/EG (fino al
28.12.2009), 2006/42/EG (a partire dal 29.12.2009).
RUMOROSITÀ/VIBRAZIONE Misurato in conformità al EN 60 745 il livello di
pressione acustica di questo utensile è < 70 dB(A) (deviazione standard: 3 dB)
e la vibrazione < 2,5 m/s2(metodo mano-braccio; incertezza K = 1,5 m/s2).
Fascicolo tecnico presso: SKIL Europe BV (PT-SEU/PJE), 4825 BD Breda, NL.
CE MINÖSÉGI TANUSÍTVÁNY Teljes felelösségünk tudatában kijelentjük,
hogy jelen termék a következö szabványoknak vagy kötelezö hatósági
elöírásoknak megfelel: EN 60 335, EN 60 745, EN 55 014, a 2006/95/EK,
2004/108/EK, 98/37/EK (2009.12.28-ig), 2006/42/EK (2009.12.29-tŒl kezdve)
elöírásoknak megfelelöen.
ZAJ/REZGÉS Az EN 60 745 alapján végzett mérések szerint ezen készülék
hangnyomás szintje < 70 dB(A) (normál eltérés: 3 dB) a rezgésszám
< 2,5 m/s2(kézre-ható érték; szórás K = 1,5 m/s2).
A mıszaki dokumentáció a következŒ helyen található: SKIL Europe BV
(PT-SEU/PJE), 4825 BD Breda, NL.
I
H

125
08 SKIL Europe B.V. A. v.d. Kloot
ЗАЯВЛЕНИЕ О СООТВЕТСТВИИ Мы с полной ответственностыо
заявляем, что это изделие соответствует следующим стандартам или
станда ртизованным документам: EN 60 335, EN 60 745, EN 55 014,
в соответсувии с инструкциями 2006/95/EC, 2004/108/EC, 98/37/EC
(до 28.12.2009), 2006/42/EC (начиная с 29.12.2009).
ШУМНОСТИ/ВИБРАЦИИ При измерении в соответствии co стандартoм
EN 60 745 уровень звукового давления для этого инструмента
составляет < 70 дБ (A) (стандартное отклонение: 3 dB), и вибрации -
< 2,5 м/с2(по методу для рук; недостоверность K = 1,5 м/с2).
Техническая документация у: SKIL Europe BV (PT-SEU/PJE),
4825 BD Breda, NL.
CE ВІДПОВІДНІСТЬ Ми заявляємо, що відповідність даного продукту
наступним стандартам і регулюючим документам повністю нашою
відповідальністю: EN 60 335, EN 60 745, EN 55 014, відповідно до
положень директив 2006/95/EG, 2004/108/EG, 98/37/EG до 28.12.2009 p.),
2006/42/EG (після 29.12.2009 p.).
ШУМ/ВІБРАЦІЯ Зміряний відповідно до EN 60 745 рівень тиску звуку
даного інструменту < 70 дБ(А) (стандартне відхилення: 3 дБ) i вібрація
< 2,5 м/с2(ручна методика; похибка K = 1,5 м/с2).
Технічні документи в: SKIL Europe BV (PT-SEU/PJE), 4825 BD Breda, NL.
RU
UA
CE ∆ΗΛΩΣΗ ΣYMBATOTΗΤΑΣ ∆ηλώνουµε υπευθύνως τι το προϊν
αυτ είναι κατασκευασµένο σύµφωνα µε τους εξής κανονισµούς ή
κατασκευαστικές συστάσεις: EN 60 335, EN 60 745, EN 55 014, κατά τις
διατάξεις των κανονισµών της Κοινής Αγοράς 2006/95/EK, 2004/108/EK,
98/37/EK (έως 28.12.2009), 2006/42/EK (απ 29.12.2009).
ΘΟΡYΒΟ/ΚΡΑ∆ΑΣΜΟYΣ Μετρηµένη σύµφωνα µε EN 60 745 η στάθµη
ακουστικής πίεσης αυτού του εργαλείου ανέρχεται σε < 70 dB(A) (κοινή
απκλιση: 3 dB) και ο κραδασµς σε < 2,5 m/s2(µεθοδος
χειρς/βραχίονα - ανασφάλεια K = 1,5 m/s2).
Τεχνικς φάκελος απ: SKIL Europe BV (PT-SEU/PJE), 4825 BD Breda, NL.
DECLARAØIE DE CONFORMITATE CE Declaråm pe proprie råspundere cå
acest product este conform cu urmåtoarele standarde sau documente
standardizate: EN 60 335, EN 60 745, EN 55 014, în conformitate cu regulile
2006/95/CE, 2004/108/CE, 98/37/CE (pânå la 28.12.2009), 2006/42/CE
(începând cu 29.12.2009).
ZGOMOT/VIBRAØII Måsurat în conformitate cu EN 60 745 nivelul de
presiune a sunetului generat de acest instrument este de < 70 dB(A)
(abaterea standard: 3 dB) iar nivelul vibraøiilor < 2,5 m/s2(metoda mînå - braø;
incertitudine K = 1,5 m/s2).
Documentaøie tehnicå la: SKIL Europe BV (PT-SEU/PJE), 4825 BD Breda, NL.
GR
RO

126
08 SKIL Europe B.V. A. v.d. Kloot
CE IZJAVA O USKLA ĐENOSTI Izjavljujemo uz punu odgovornost da je
ovaj proizvod usklađen sa slijedeçim normama i normativnim dokumentima:
EN 60 335, EN 60 745, EN 55 014, prema odredbama smjernica 2006/95/EG,
2004/108/EG, 98/37/EG (do 28.12.2009), 2006/42/EG (od 29.12.2009).
BUCI/ VIBRACIJAMA Mjereno prema EN 60 745 prag zvuãnog tlaka ovog
elektriãnog alata iznosi < 70 dB(A) (standardna devijacija: 3 dB) a vibracija
< 2,5 m/s2(postupkom na ‰aci-ruci; nesigurnost K = 1,5 m/s2).
Tehniãka dokumentacija se moÏe dobiti kod:
SKIL Europe BV (PT-SEU/PJE), 4825 BD Breda, NL.
CE IZJAVA O USKLA ĐENOSTI Pod punom odgovorno‰çu izjavljujemo da je
ovaj proizvod usklađen sa sledeçim standardima ili standardizovanim
dokumentima: EN 60 335, EN 60 745, EN 55 014, u skladu sa odredbama
smernica 2006/95/EG, 2004/108/EG, 98/37/EG (do 28.12.2009), 2006/42/EG
(od 29.12.2009).
BUKA/VIBRACIJE Mereno u skladu sa EN 60 745 nivo pritiska zvuka ovog
alata iznosi < 70 dB(A) (normalno odstupanje: 3 dB) a vibracija < 2,5 m/s2
(mereno metodom na ‰aci-ruci; nesigurnost K = 1,5 m/s2).
Tehniãka dokumentacija kod: SKIL Europe BV (PT-SEU/PJE),
4825 BD Breda, NL.
CE PREHLÁSENIE O ZHODE Vÿhradne na na√u vlastnú zodpovednos†
prehlasujeme, Ωe tento vÿrobok zodpovedá nasledujúcim normám alebo
normovanÿm dokumentom: EN 60 335, EN 60 745, EN 55 014, v súlade s
predpismi 2006/95/EG, 2004/108/EG, 98/37/EG (do 28.12.2009), 2006/42/EG
(od 29.12.2009).
HLUKU/VIBRÁCIÁCH Merané pod¬a EN 60 745 je úroveµ akustického tlaku
tohto nástroja < 70 dB(A) (√tandardná odch¥lka: 3 dB) a vibrácie sú < 2,5 m/s2
(metóda ruka - paΩa; nepresnosÈ K = 1,5 m/s2).
Súbor technickej dokumentácie sa nachádzajú na adrese:
SKIL Europe BV (PT-SEU/PJE), 4825 BD Breda, NL.
SK
HR
SCG
CE ДЕKЛАPAЦИЯ ЗA CБOTВETCTBИE Декларираме на изцяло наша
отговорност, че това изделие е съобразено със следните стандарти или
стандартизирани документи: EN 60 335, EN 60 745, EN 55 014, в
съответствие с нормативната уредба на 2006/95/EG, 2004/108/EG,
98/37/EG (до 28.12.2009), 2006/42/EG (от 29.12.2009).
ШУМ/ВИБPAЦИИ Измерено в съответствие с EN 60 745 нивото на
звуково налягане на този инструмент е < 70 dB(A) (стандартно
отклонение: 3 dB) а вибрациите са < 2,5 m/s2(метод ръка-рамо;
неопределеност K = 1,5 m/s2).
Подробни технически описания при: SKIL Europe BV (PT-SEU/PJE),
4825 BD Breda, NL.
BG

127
08 SKIL Europe B.V. A. v.d. Kloot
IZJAVA O USTREZNOSTI CE Odgovorno izjavljamo, da je ta izdelek v
skladu z naslednjimi standardi ali standardnimi dokumenti: EN 60 335,
EN 60 745, EN 55 014, v skladu s predpisi navodil 2006/95/ES, 2004/108/ES,
98/37/ES (do 28.12.2009), 2006/42/ES (od 29.12.2009).
HRUP/VIBRACIJA Izmerjeno v skladu s predpisom EN 60 745 je raven
zvoãnega pritiska za to orodje < 70 dB(A) (standarden odmik: 3 dB) in
vibracija < 2,5 m/s2 (metoda ‘dlan-roka’; netoãnost K = 1,5 m/s2).
Tehniãna dokumentacija se nahaja pri: SKIL Europe BV (PT-SEU/PJE),
4825 BD Breda, NL.
CE VASTAVUSDEKLARATSIOON Kinnitame ainuvastutajana, et see toode
vastab järgmistele standarditele või normdokumentidele: EN 60 335,
EN 60 745, EN 55 014 vastavalt direktiivide 2006/95/EÜ, 2004/108/EÜ,
98/37/EÜ (kuni 28.12.2009), 2006/42/EÜ (alates 29.12.2009) nõuetele.
MÜRA/VIBRATSIOON Vastavalt kooskõlas normiga EN 60 745 läbi viidud
mõõtmistele on antud seadme helirõhk < 70 dB(A) (standardkõrvalekalle:
3 dB) ja vibratsioon < 2,5 m/s2(käe-randme-meetod; mõõtemääramatus
K = 1,5 m/s2).
Tehniline toimik saadaval aadressil: SKIL Europe BV (PT-SEU/PJE),
4825 BD Breda, NL.
CE DEKLARÅCIJA PAR ATBILST±BU STANDARTIEM Mïs ar pilnu
atbild¥bu pazi¿ojam, ka ‰is izstrÇdÇjums atbilst standartiem vai
standartizÇcijas dokumentiem EN 60 335, EN 60 745, EN 55 014 un ir
saska¿Ç ar direkt¥vÇm 2006/95/ES, 2004/108/ES, 98/37/ES (l¥dz 28.12.2009)
un 2006/42/ES (no 29.12.2009).
TROKSNIS/VIBRÅCIJA Saska¿Ç ar standartu EN 60 745 noteiktais
instrumenta rad¥tÇ trok‰¿a ska¿as spiediena l¥menis ir < 70 dB(A) (pie tipiskÇs
izkliedes: 3 dB) un vibrÇcijas intensitÇte ir < 2,5 m/s2(strÇdÇjot rokas reÏ¥mÇ;
izkliede K = 1,5 m/s2).
TehniskÇ lieta no: SKIL Europe BV (PT-SEU/PJE), 4825 BD Breda, NL.
CE ATITIKTIES DEKLARACIJA Mes atsakingai parei‰kiame, kad ‰is
gaminys atitinka tokius standartus ir normatyvinius dokumentus: EN 60 335,
EN 60 745, EN 55 014 pagal reglament˜ 2006/95/EB, 2004/108/EB, 98/37/EB
(iki 2009-12-28), 2006/42/EB (nuo 2009-12-29) nuostatas.
TRIUK·MINGUMAS/VIBRACIJA ·io prietaiso triuk‰mingumas buvo
i‰matuotas pagal EN 60 745 reikalavimus keliamo triuk‰mo garso slògio
lygis siekia < 70 dB(A) (standartinis nuokrypis: 3 dB) ir vibracijos pagreitis
rankos pla‰takos srityje tipiniu atveju yra maÏesnis, kaip < 2,5 m/s2(paklaida
K = 1,5 m/s2).
Techninò byla laikoma: SKIL Europe BV (PT-SEU/PJE), 4825 BD Breda, NL.
SLO
EST
LV
LT