SKYDANCE R17 User manual

R17 R8-5
● Apply to RGB+CCT LED controller.
Ultra sensitive color adjustment touch wheel.●
● Each remote can match one or more receiver.
● R bC 2032 attery powered.
● Operate with LED indicator light.
User Manual Ver 1.0.8
Technical Parameters
Input and Output
Warranty
5 years
Warranty
Operation temperature
Environment
IP20
IP rating
Ta: -30
O
C ~ +55
O
C
Model No.: R17/R8-5
Features
Page 1
1 and 4 zone RGB+CCT/Touch color wheel/Wireless remote 30m distance/CR2032 battery
Ultrathin Touch Wheel RF Remote Controller
Output signal RF 2.4GHz( )
Working voltage 3VDC CR2032( )
Working current ＜5mA
Standby current ＜10μA
Standby time 1 year
Remote distance 30m(Barrier-free space)
Safety and EMC
EMC standard (EMC) EN301 489,EN 62479
Radio Equipment(RED) EN300 328
Certification CE,EMC,LVD,RED
EN60950
Safety standard(LVD)
Match Remote Control (two match ways)
Use the controller’s Match key
Match:
Short press match key, immediately press on/off
key (single zone remote) or zone key (multiple zone
remote) on the remote.
The LED indicator fast flash a few times
means match is successful.
Use Power Restart
Match:
Switch off the power, then switch on power again,
immediately short press on/off key (single zone remote)
or zone key (multiple zone remote) 3 times on the remote.
The light blinks 3 times means match is successful.
.
Delete:
Switch off the power, then switch on power again,
immediately short press on/off key (single zone remote)
or zone key (multiple zone remote) 5 times on the remote.
The light blinks 5 times means all matched remotes were
deleted.
Delete:
Press and hold match key for 5s to delete all match,
The LED indicator fast flash a few times
means all matched remotes were deleted.
End user can choose the suitable match/delete ways. Two options are offered for selection:
R17,R8-5 Ultrathin Touch Wheel RF Remote Controller
LVDRED
1 Zone RGB+CCT 4 Zone RGB+CCT
● R17 1 zone RGB+CCT remote
R/G/B
Mode
Multi-color wheel
Brightness RGB Color
Color temperature
Speed/Saturation
On/Off
Scene
Brightness: Adjust brightness, short press 11 levels,
long press 2s get max or min brightness.
at the same time, multi-color wheel become brightness wheel.
On/Off: Short press turn on/off light.
Mode: Switch dynamic mode, short press run the next mode,
long press 2s run mode cycle.
Speed/Saturation:
For dynamic mode, adjust mode speed,
short press 10 levels, long press 2s get the default speed.
For static RGB color, adjust saturation,
namely change current static color to mixed white slowly,
short press 11 levels,
long press 1-6s for continuous 256 levels adjustment.
Mechanical Structures and Installations
9mm
58.5mm
107mm
58.5mm
Operation
● When light is on, touch the color wheel, the indicator will display red.
● To extend battery life, no touch or press key operation after a few seconds,
the touch wheel will enter sleep state, you need press any key to make touch wheel quit sleep state.
37.00 mm
63.00 mm
68.00 mm
Note: Before the first use,
please remove the protective
film on the battery.
C 2032 BatteryR
Back holder
To fix the remote, two options are offered for selection:
Option 1: fix the remote' back holder on the wall with two screws.
Option 2: adhere the remote' back holder to the wall with paster.
Key function
Weight
0.037 k g
Gross weight
Net weight
0.062kg
Note: If the LED indicator is not on when press key,
it is due to dead battery or bad contact caused by multiple plugging,
please replace the battery, or raise the battery shrapnel with a screwdriver.

Safety information
1. Read all instructions carefully before you begin this installation.
2. When installing battery, pay attention to the battery positive and negative polarity.
A long time without the remote control, remove the battery.
When remote distance becomes smaller and insensitive, replace the battery.
3. If no response from the receiver, please re-match the remote.
4. Gently handle remote, beware of falling.
5. For indoor and dry location use only.
User Manual Ver 1.0.8 Page 2
Adjust color temperature by WW/CW channel.
CCT: Adjust color temperature, WW CW .short press 11 levels, long press adjust + brightness
at the same time, multi-color wheel become color temperature wheel.
1
Warm White
WW 100%
CW 0%
11
Cool White
WW 0%
CW 100%
6
Natural White
WW 100%
CW 100%
R/G/B: Short press get red green or blue color directly , .
long press 1-6s adjust R/G/B brightness continuously to achieve millions of colors.
Scene: Short press recall the scene, long press 2s save the current color into scene.
RGB: Adjust static RGB color, short press get 24 kinds static color.
at the same time, multi-color wheel become RGB color wheel.
1
R 100%
9
G 100%
21
R 100%
B 100%
17
B 100%
25(1)
R 100%
5
R 100%
G 100%
13
G 100%
B 100%
● R8-5 4 zone RGB+CCT remote
4 Zone
Multi-color wheel
Brightness RGB Color
Color
temperature
R8-5 can also be used as four zone universal remote,
each zone can match single color, dual color(WW/CW),
RGB, RGBW or RGB+WW/CW controller.
Zone 1/2/3/4 + : Single color
Zone 1/2/3/4 + : Dual color(WW/CW)
Zone 1/2/3/4 + : RGB
Zone 1/2/3/4 + : RGBW
Zone 1/2/3/4 + : RGB+WW/CW
For example, long press and key for 2s
will set zone 1 as RGB light type.
When remote light type set ok,
the red indicator will light on longer.
Mode
Speed/Saturation
On/Off
On/Off: Turn on/off all four zone light.
1,2,3,4 Zone: Short press turn on zone light, at the same time, select current zone.
Long press 2s turn off zone light.
Mode: Switch dynamic mode, short press run the next mode, long press 2s run mode cycle.
Speed/Saturation:
For dynamic mode, adjust mode speed,
short press 10 levels, long press 2s get the default speed.
For static RGB color, adjust saturation, namely change current static RGB color to mixed white slowly,
short press 11 levels, long press 1-6s for continuous 256 levels adjustment.
1
Pure color
11
White Color
RGB: Adjust static RGB color, short press get 24 kinds static color.
at the same time, multi-color wheel become RGB color wheel.
1
R 100%
9
G 100%
21
R 100%
B 100%
17
B 100%
25(1)
R 100%
5
R 100%
G 100%
13
G 100%
B 100%
Brightness: Adjust brightness, short press 11 levels, long press 2s get max or min brightness.
at the same time, multi-color wheel become brightness wheel.
Adjust color temperature by WW/CW channel.
CCT: Adjust color temperature, .short press 11 levels, long press adjust WW+CW brightness
at the same time, multi-color wheel become color temperature wheel.
Multi-color wheel:
When it is brightness wheel, touch to change brightness.
When it is RGB color wheel, touch to change RGB color.
When it is color temperature wheel, touch to change color temperature.
R 100%
G 100%
R 100%
B 100%
R 100%
G 100%
B 100%
G 100%
B 100%
100%
1%
50%
WW 0%
CW 100%
WW 100%
CW 0%
WW 100%
CW 100%
100%
brightness wheel color temperature wheel RGB color wheel
1
Warm White
WW 100%
CW 0%
11
Cool White
WW 0%
CW 100%
6
Natural White
WW 100%
CW 100%
R17,R8-5 Ultrathin Touch Wheel RF Remote Controller