SKYDANCE R1 User manual

● Apply to single color or dual color LED controller.
● Each remote can match one or more receiver.
● R bC 2032 attery powered.
● Operate with LED indicator light.
● Magnet on the back which can be easily stuck on back holder or any metal surfaces.
Technical Parameters
Input and Output
Warranty
5 years
Warranty
Operation temperature
Case temperature (Max.)
Environment
IP20
IP rating
Ta: -30
O
C ~ +55
O
C
T c: +85
O
C
Model No.: R1/R2/RU4/RU8
Features
1,4,8 zone dimming/10-key/Wireless remote 30m distance/CR2032 battery/Magnet stuck fix
10-Key RF Remote Controller
R1 R2
Output signal RF 2.4GHz( )
Working voltage 3VDC CR2032( )
Working current ＜5mA
Standby current ＜2μA
Standby time 2 years
Remote distance 30m
Safety and EMC
EMC standard (EMC) EN301 489,EN 62479
Radio Equipment(RED) EN300 328
Certification CE,EMC,LVD,RED
EN60950
Safety standard(LVD)
LVDRED
1 Zone Dimming 1 Zone CCT
RU4
4 Zone Dimming
RU8
8 Zone Dimming
User Manual Ver 1.0.2 www.iskydance.com Page 1

Mechanical Structures and Installations
Match Remote Control (two match ways)
Use the controller’s Match key
Match:
Short press match key, immediately press on/off
key (single zone remote) or zone key (multiple zone
remote) of the remote.
Use Power Restart
Match:
Switch off the power, then switch on power again,
immediately short press on/off key (single zone remote)
or zone key (multiple zone remote) 3 times on the remote.
The light blinks 3 times means match is successful.
.
Delete:
Switch off the power, then switch on power again,
immediately short press on/off key (single zone remote)
or zone key (multiple zone remote) 5 times on the remote.
The light blinks 5 times means all matched remotes were
deleted.
Delete:
Press and hold match key for 5s to delete all match,
The light blinks 5 times means all matched remotes
were deleted.
End user can choose the suitable match/delete ways. Two options are offered for selection:
11mm
135mm
40mm
Note: Before the first use,
please remove the protective film on the battery.
53.50 mm
CR2032 Battery
To fix the remote, three options are offered for selection:
Option 1: stuck the remote on any metal surfaces directly.
Option 2: fix the remote' back holder on the wall with two screws.
Option 3: adhere the remote' back holder to the wall with paster.
Back holder with magnet
User Manual Ver 1.0.2 www.iskydance.com Page 2
R1,R2,RU4,RU8 10-Key RF Remote Controller

Color temperature+ -:/
Short press 11 levels, long press 1-6s for continuous 256 levels adjustment.
Brightness+/-:
Short press 10 levels, long press 1-6s for continuous 256 levels adjustment.
Scene 1/2 :
, .Short press recall the scene long press 2s save the current color into the scene
S1 S2
CT
-
CT+
-
+
NW
WW CW
On/Off Natural white
Warm white Cool white
Brightness-Brightness+
Scene1 Scene2
Color
temperature-
Color
temperature+
+
R2 1 zone CCT remote●
LED indicator
Brightness+/-:
Short press 10 levels,
long press 1-6s for continuous 256 levels adjustment.
Scene 1/2:
brightness memory.
,Short press recall the scene
long press 2s save the current brightness into the scene.
S1 S2
Small Night light
Brightness+
Scene2
Brightness 50％
Brightness 100％
On/Off
Brightness 25％
Brightness-
Scene1
Brightness 75％
LED indicator
R1 1 zone dimming remote●
Key function
User Manual Ver 1.0.2 www.iskydance.com Page 3
R1,R2,RU4,RU8 10-Key RF Remote Controller

Safety information
1. Read all instructions carefully before you begin this installation.
2. When installing battery, pay attention to the battery positive and negative polarity.
A long time without the remote control, remove the battery.
When remote distance becomes smaller and insensitive, replace the battery.
3. If no response from the receiver, please re-match the remote.
4. Gently handle remote, beware of falling.
5. For indoor and dry location use only.
ON OFF
ON OFF
ON OFF
OFF
ON OFF
Al l
ON
Al l
All on All off
Zone1 on Zone1 off
Zone2 on
Zone2 off
Zone3 on Zone3 off
Zone4 on Zone4 off
1
2
3
4
All on: Turn on all 4 zone light .
All off: Turn off all 4 zone light .
Zone 1 4 on -:
Short press turn on zone light,
long press 1-6s increase brightness continuously.
Zone 1 4 off -:
Short press turn off zone light,
long press 1-6s decrease brightness continuously.
.All on: Turn on all 8 zone light
All off: Turn off all 8 zone light .
Zone 1-8 on/off:
Short press turn on/off zone light,
long press 1-6s increase or decrease
brightness continuously.
Zone1 on/off
All on All off
Zone3 on/off
Zone5 on/off
Zone7 on/off
Zone2 on/off
Zone4 on/off
Zone6 on/off
Zone8 on/off
OFF
Al l
ON
Al l
1 2
34
56
7 8
RU4 4 zone dimming remote●
RU8 8 zone dimming remote●
R1,R2,RU4,RU8 10-Key RF Remote Controller
LED indicator
LED indicator
User Manual Ver 1.0.2 www.iskydance.com Page 4