SKYDANCE RGBW4ZTC User manual

RGBW4ZTC
● Apply to RG B or RG BW L ED controller.
Ultra sensitive color adjustment touch wheel.●
●Independent dimming function of each R, G , B , W c hannel to achieve millions of colors.
● Each remote ca n match one or more receiver.
● AAAx2 battery powered.
● O perate w ith LED indicator light.
● Magnet on the back which ca n be stuck on back holder.
TechnicalParameters
Features
4 zone RGB or RGBW/Touch color wheel/Wireless remote 30m distance/AAAx2 battery/Magnet stuck fix
RT4, RT9 T ouch W heel RF Remote C ontroller
LVD RED
4 Z one RG B/ RG BW
Mechanical Structures and Installations
O peration
● When turn on light, the indicator display blue. when turn off light, the indicator display red.
● When touch the color wheel
, the indicator will display the same color.
● When press or touch operation is invalid (If the light is off), the indicator display red.
● To extend battery life
, no touch or press key operation after a few seconds,
the touch wheel will enter sleep state, you need press any key to make touch wheel quit sleep state.
53.00 mm
122.00 mm
17.50 mm
53.50 mm
3VDC(AAAx2) Battery Back holder with magnet
T
Option 1: stuck the remote on any metal surfaces directly.
Option 2: fix the remote' back holder on the wall with two screws.
Option 3: adhere the remote' back holder to the wall with paster.
Match Remote Control (two match ways)
Use the controller’s Match key
Match:
Short press match key, immediately press on/off
key (single zone remote) or zone key (multiple
zone remote) of the remote.
The LED indicator fast flash a few times
means match is successful.
Use Power Restart
Match:
Switch off the power, then switch on power again,
immediately short press on/off key (single zone remote)
or zone key (multiple zone remote) 3 times on the remote.
The light blinks 3 times means match is successful.
.
Delete:
Switch off the power, then switch on power again,
immediately short press on/off key (single zone remote)
or zone key (multiple zone remote) 5 times on the remote.
The light blinks 5 times means all matched remotes were
deleted.
Delete:
Press and hold match key for 5s to delete all match,
The LED indicator fast flash a few times
means all matched remotes were deleted.
End user can choose the suitable match/ delete ways. Two options are offered for selection:
W arranty
5 y ea rs
Wa rranty
Operation temperature
Environment
IP20
IP rating
Ta: -30
O
C ~ + 5 5
O
C
Safety and EMC
EMC standard (EMC) EN301 489,EN 62479
Radio Equipment(RED) EN300 328
Certification CE,EMC,LVD,RED
EN60950
Safety standard(LVD)
Input and O utput
O utput signa l R F 2 .4G Hz( )
Working voltage 3 VDC AAAx2( )
Working current ＜5mA
Sta ndby c urrent ＜10μA
Sta ndby time 1 y ear
Remote distance 3 0m(Barrier-free space)
Weight
0 .048kg
G ross weight
N et weight
0 .088kg
MOUNTING INSTRUNCTIONS
Remote controller for RGB/RGBW lamps
RGBW4ZTC

Sa fety i nformati on
.
RT4 , RT9 Touch W heel RF Remote Controller
:
: Touch to change current zone static RGB color.
:
:
:
124
3
R G B
W
S1S2
● RGBW4ZTC 4 zone RG B/ RG BW remote
124
3
S1S2
R G WB
: Short press turn on/off all zone light.
: For RGB light, short press turn on/off white (RGB mix), long
press 1-6s adjust saturation continously, namely change current
static RGB color to mixed white slowly. For RGBW light, short
press turn on/off W channel, long press 1-6s adjust W brightness
continously, namely change saturation by add white color slowly.
For static color, adjust brightness,
short press 10 levels,
long press 1-6s for continous 256 levels adjustment.
For dynamic mode, adjust speed,
short press 10 levels, long press 2s get the default speed.
: Short press recall the scene, long press 2s save current state into S1/S2.
the LED indicator display green when save OK.
4 zone recall or save synchronously.
1. Read all instructions carefully before you begin this installation.
2. When installing battery, pay attention to the battery positive and negative
polarity. A long time without the remote control, remove the battery.
When remote distance becomes smaller and insensitive, replace the battery.
3. if no response from the receiver, please re-match the remote
4. Gently handle remote, beware of falling.
5. For indoor and dry location use only.
Short press select and turn on zone light,
long press 2s turn off zone light.
Short press multiple zone key fastly,
will select multiple zone synchronously.
: Short press get red, green or blue color directly.
long press 1-6s adjust R/G/B brightness
continously to achieve millions of colours.
Adjust dynamic mode for current selected zone,
Short press run next dynamic mode, long press 2s run mode-cycle