SKYDANCE RT1 User manual

Technical Parameters
1
User Manual Ver 1.1.0
LVDRED
Operation
● When turn on light, the indicator display blue. when turn off light, the indicator display red.
● When touch the color wheel, the indicator will display the same color.
● When press or touch operation is invalid (If the light is off), the indicator display red.
● To extend battery life, no touch or press key operation after a few seconds, the touch wheel will enter sleep state, you need press any key to make touch
wheel quit sleep state.
Match Remote Control (two match ways)
End user can choose the suitable match/delete ways. Two options are offered for selection:
Use the controller’s Match key Use Power Restart
Match:
Switch off the power, then switch on power, repeat again.
Immediately short press on/off key (single zone remote) or zone key
(multiple zone remote) 3 times on the remote.
The light blinks 3 times means match is successful.
Delete:
Switch off the power, then switch on power, repeat again.
Immediately short press on/off key (single zone remote) or zone key
(multiple zone remote) 5 times on the remote.
The light blinks 5 times means all matched remotes were deleted.
Match:
Short press match key, immediately press on/off key (single zone remote)
or zone key (multiple zone remote) of the remote.
The LED indicator fast flash a few times means match is successful.
Delete:
Press and hold match key for 5s to delete all match,
The LED indicator fast flash a few times means all matched remotes
were deleted.
Input and Output
Operation temperature
Environment
Ta: -30
O
C ~ +55
O
C
Safety and EMC
EMC standard (EMC) ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4
Radio Equipment(RED) ETSI EN 300 328 V2.2.2
Certication CE,EMC,LVD,RED
EN 62368-1:2020+A11:2020
Safety standard(LVD)
Output signal (2.4 z)RF GH
Working voltage 3 AAAx2)VDC(
Working current <5mA
Standby current <10μA
Standby time 1 year
Remote distance 30m(Barrier-free space)
Warranty
5 years
Warranty
Gross weight
Size
Package
0.088kg
L140 x W60 x H26mm
Model No.: RT1/RT6/RT8
Dimming Touch Wheel RF Remote Controller
1, 4, 8 zone dimming/Touch color wheel/Wireless remote 30m distance/AAAx2 battery/Magnet stuck x
RT1 RT6
1 Zone Dimming 4 Zone Dimming 8 Zone Dimming
RT8
● Apply to single color LED controller.
Ultra sensitive color adjustment touch wheel.●
● Each remote can match one or more receiver.
● AAAx2 b attery powered.
● Operate with LED indicator light.
● Magnet on the back which can be stuck on back holder.
Features
Mechanical Structures and Installations
53.00 mm
122.00 mm
17.50 mm
53.50 mm
3VDC(AAAx2) Battery Back holder with magnet
To x the remote, three options are offered for selection:
Option 1: stuck the remote on any metal surfaces directly.
Option 2: x the remote' back holder on the wall with two screws.
Option 3: adhere the remote' back holder to the wall with paster.

S1S2S3S4
124
3
568
7
S1S2S3S4
124
3
2
User Manual Ver 1.1.0
Safety information
1. Read all instructions carefully before you begin this installation.
2. When installing battery, pay attention to the battery positive and negative polarity.
A long time without the remote control, remove the battery.
When remote distance becomes smaller and insensitive, replace the battery.
3. If no response from the receiver, please re-match the remote.
4. Gently handle remote, beware of falling.
5. For indoor and dry location use only.
Key function
● RT1 1 zone dimming remote
S1S2S3S4
30s
: Short press recall the scene, long press 2s save current brightness into S1/2/3/4.
the LED indicator display green when save OK.
: 25%, 50%, 75%,100% brightness.
: Adjust brightness, short press 10 levels, long press 1-6s for continuous 256 levels adjustment.
: Touch to change brightness.
: Turn on/off light.
: Small night brightness (10%).
: Turn off light after 30s, long press 2s will turn off light after 60s.
S1S2S3S4
30s
: Short press turn on/off all zone light.
: Short press select and turn on zone light, long press 2s turn off zone light.
Short press multiple zone key fastly, will select multiple zone synchronously.
: Touch to change current zone brightness.
: Short press recall the scene, long press 2s save current state into S1/2/3/4.
the LED indicator display green when save OK.
4 zone recall or save synchronously.
: 25%, 50%, 75%,100% brightness for current selected zone.
S1S2S3S4
124
3
The remote can be used as 4 zone dimming remote or single zone 4 channel dimming remote.
On/Off + 4: Long press 2s set as 4 channel dimming remote, only match with one or multiple receiver of 4 channel, such as V4 or C4 controller.
On/Off + 1: Long press 2s set as 4 zone dimming remote, each zone match with one or multiple receivers.
When set ok, the red indicator will light on longer.
● RT6 4 zone dimming remote
● RT8 8 zone dimming remote
: Short press turn on/off all zone light.
: Short press select and turn on zone light, long press 2s turn off zone light.
Short press multiple zone key fastly, will select multiple zone synchronously.
: Touch to change current zone brightness.
: Short press recall the scene, long press 2s save current state into S1/2/3/4.
the LED indicator display green when save OK.
8 zone recall or save synchronously.
S1S2S3S4
124
3
568
7