
User Manual Ver 1.0.5 Page 2
Match Remote Control
Match:
Short press match key, immediately press on/off key of the remote.
Delete:
Press and hold match key for 5s to delete all match, The light blinks 5 times means all matched remotes were deleted.
Dynamic mode list
P01
P02
P03
P04
P05
P06
P07
P08
P09
P10
P11
P12
P13
P14
P15
P16
P17
P18
P19
P20
P21
P22
P23
P24
P25
P26
P27
P28
P29
P30
P31
P32
Red horse race white ground
7 color jump sectionally
7 color strobe sectionally
6 color smooth sectionally
7 color chase
Red Yellow float
Green Cyan float
Blue Purple float
RGBW float
No. Name No. Name No. Name
Blue White float
Purple float
Red float
Green float
Blue float
Blue meteor
White meteor
7 color meteor
Purple meteor
RGB chase
Blue White chase
Green Cyan chase
Green horse race white ground
Blue horse race white ground
Yellow horse race blue ground
Cyan horse race blue ground
Purple horse race blue ground
7 color multi horse race
7 color scan close + open
7 color multi-scan close + open
7 color horse race close + open
7 color multi horse race close + open
6 color float
DMX digital light tube
DMX signal
DMX digital light tube
A
G
B
● XC connect with DMX Digital light tube
D+ D- GN D GND
IN PUT
5-24V DC
+
DM X OU TPU T
Note:
1. For RGB light, DMX decoder first address set in sequence as 1,4,7,10,...
For RGBW light, DMX decoder first address set in sequence as 1,5,9,13,...
2. For D4 decoder, CH1/CH2/CH3/CH4 channel corresponding to R/G/B/W channel output.
● XC connect with DMX-PWM three channel decoder
Malfunctions analysis & troubleshooting
1. DMX decoder start address error.
2. Wrong connection of R/G/B wires.
1. Check the DMX start address.
2. Reconnect R/G/B wires.
1. No power.
2. Wrong connection or insecure.
1. Check the power.
2. Check the connection.
Causes Troubleshooting
1. The battery has no power.
2. Beyond controllable distance.
3. The controller did not match the remote.
1. Replace battery.
2. Reduce remote distance.
3. Re-match the remote.
Malfunctions
Wrong color
No light
No response
from the remote
XC RF-DMX512 RGB/RGBW LED Controller
Power Supply
5-24VDC
Constant Voltage
AC100-240V
Power Supply
5-24VDC
Constant Voltage
AC100-240V
DMX signal
D+ D- GN D GND
IN PUT
5-24V DC
+
DM X OUT PUT
Power Supply
12-24VDC
Constant Voltage
AC100-240V
M M M
DMX signal
RGB LED strip
RGB LED strip
RGB LED strip
D4 D4 D4