SKYDANCE RS8 User manual

RS3 RS4
Warranty
5 years
Warranty
Operation temperature
Case temperature (Max.)
Environment
IP20
IP rating
Ta: -30
O
C ~ +55
O
C
T c: +85
O
C
Model No.: RS3/RS4/RS8
Multiple Zone RGB/RGBW RF Remote Controller
Safety and EMC
EMC standard (EMC) EN301 489,EN 62479
Radio Equipment(RED) EN300 328
Certification CE,EMC,LVD,RED
EN60950
Safety standard(LVD)
LVDRED
2 Zone RGB/RGBW 4 Zone RGB/RGBW 8 Zone RGB/RGBW
RS8
● Apply to RGB or RGBW LED controller.
Ultra sensitive color adjustment touch wheel.●
● Each remote can match one or more receiver.
● AAAx2 b attery powered.
● Operate with LED indicator light.
● Magnet on the back which can be easily stuck on back holder or any metal surfaces.
Technical Parameters
Input and Output
Features
18-Key/2,4,8 Zone/Touch color wheel/Wireless remote 30m distance/AAAx2 battery/Magnet stuck fix
Output signal RF 2.4GHz( )
Working voltage 3VDC AAAx2( )
Working current ＜5mA
Standby current ＜10μA
Standby time 1 year
Remote distance 30m
User Manual Ver 1.0.2 www.iskydance.com Page 1

Mechanical Structures and Installations
Operation
● When turn on light, the indicator display blue. when turn off light, the indicator display red.
● When touch the color wheel, the indicator will display the same color.
● When press or touch operation is invalid (If the light is off), the indicator display red.
● To extend battery life, no touch or press key operation after a few seconds,
the touch wheel will enter sleep state, you need press any key to make touch wheel quit sleep state.
Match Remote Control (two match ways)
Use the controller’s Match key
Match:
Short press match key, immediately press zone
key of the remote.
Use Power Restart
Match:
Switch off the power, then switch on power again,
immediately short press zone key 3 times on the remote.
The light blinks 3 times means match is successful.
.
Delete:
Switch off the power, then switch on power again,
immediately short press zone key 5 times on the remote.
The light blinks 5 times means all matched remotes were
deleted.
Delete:
Press and hold match key for 5s to delete all match,
The light blinks 5 times means all matched remotes
were deleted.
End user can choose the suitable match/delete ways. Two options are offered for selection:
RS3,RS4,RS8 Multiple Zone RGB/RGBW RF Remote Controller
53.50 mm
Back holder with magnet
To x the remote, three options are offered for selection:
Option 1: stuck the remote on any metal surfaces directly.
Option 2: fix the remote' back holder on the wall with two screws.
Option 3: adhere the remote' back holder to the wall with paster.
3VDC(AAAx2) Battery
50.00 mm
141.00 mm
17.50 mm
User Manual Ver 1.0.2 www.iskydance.com Page 2

● RS3 2 zone RGB/RGBW remote
RGBW
1 2
P5P6P7P8
S+
P1P2P3P4
Zo ne Zone
S
-
RGBW
S1
1
S2
I
O
I
O
I
O
I
O
2 3 4
Touch color wheel.
Touch color wheel.
Turn on/off 1/2/3/4 zone light, at the same time, select current zone.
short press multiple zone on key fastly, will select multiple zone synchronously.
Zone 1/2 on/off.
Short press select and turn on zone light, long press 2s turn off zone light.
short press 1/2 zone key fastly, will select two zone synchronously.
2 scene memory,
short press recall the scene, long press 2s save current color into S1/S2.
4 zone recall or save synchronously.
8 dynamic mode.
Turn on/off all 2 zone light.
Turn on/off all 4 zone light.
● RS4 4 zone RGB/RGBW remote
Short press get red, green or blue color directly,
long press 1-6s adjust R/G/B brightness continuously.
Short press turn on/off white color,
long press 1-6s adjust white brightness continuously.
For dynamic mode, adjust speed,
short press 10 levels, long press 2s get the slowest or fastest speed.
For static color, adjust saturation,
namely change current static color to mixed white slowly,
short press 11 levels, long press 1-6s for continuous adjustment.
Adjust brightness,
short press 10 levels, long press 1-6s for continuous adjustment.
For dynamic mode, adjust speed,
short press 10 levels, long press 2s get the default speed.
For static color, adjust saturation,
short press 11 levels, long press 1-6s for continuous adjustment.
Short press turn on/off white color,
long press 1-6s adjust white brightness continuously.
Short press get red, green or blue color directly,
long press 1-6s adjust R/G/B brightness continuously.
Short press play 10 built-in mode, long press 2s run mode-cycle.
Adjust brightness,
short press 10 levels, long press 1-6s for continuous adjustment.
Key function
User Manual Ver 1.0.2 www.iskydance.com Page 3
RS3,RS4,RS8 Multiple Zone RGB/RGBW RF Remote Controller

Safety information
1. Read all instructions carefully before you begin this installation.
2. When installing battery, pay attention to the battery positive and negative polarity.
A long time without the remote control, remove the battery.
When remote distance becomes smaller and insensitive, replace the battery.
3. If no response from the receiver, please re-match the remote.
4. Gently handle remote, beware of falling.
5. For indoor and dry location use only.
● RS8 8 zone RGB/RGBW remote
RGBW
1 2 3 4
5 6 7 8
S1S2
Turn on/off 1/2/3/4/5/6/7/8 zone light.
Short press select and turn on zone light, long press 2s turn off zone light.
short press multiple zone key fastly, will select multiple zone synchronously.
2 scene memory,
short press recall the scene, long press 2s save current color into S1/S2.
8 zone recall or save synchronously.
Turn on/off all 8 zone light.
Touch color wheel.
For dynamic mode, adjust speed,
short press 10 levels, long press 2s get the default speed.
For static color, adjust saturation,
short press 11 levels, long press 1-6s for continuous adjustment.
Short press turn on/off white color,
long press 1-6s adjust white brightness continuously.
Short press get red, green or blue color directly,
long press 1-6s adjust R/G/B brightness continuously.
Short press play 10 built-in mode, long press 2s run mode-cycle.
Adjust brightness,
short press 10 levels, long press 1-6s for continuous adjustment.
User Manual Ver 1.0.2 www.iskydance.com Page 4
RS3,RS4,RS8 Multiple Zone RGB/RGBW RF Remote Controller