SMART SMART Board V280 User manual

PLEASE THINK BEFORE YOU PRINT
Knowledge Base
Replacing the Pen Nib on
Your SMART Board™ V280
Interactive Whiteboard
Applies to The SMART Board™ V280 interactive whiteboard
Overview
This document contains instructions for replacing the nib on your SMART Board V280
interactive whiteboard’s battery-powered pen.
Detail
Your interactive whiteboard comes with four replacement nibs and tips so that you can
easily replace the pen tips (cones) and nibs when they wear out.
If a pen nib is worn down too far, you might not be able to activate the pen’s tip switch.
NOTE
With normal use, each tip and nib lasts approximately 25 weeks.
A worn nib may
make it more
difficult to write on
the interactive
screen.
New Nib

www.smarttech.com/support www.smarttech.com/contactsupport
Support +1.403.228.5940 or Toll Free 1.866.518.6791 (U.S./Canada)
2 | KNOWLEDGE BASE – REPLACING THE PEN NIB ON YOUR SMART BOARD™
V280 INTERACTIVE WHITEBOARD
To replace the pen nib 1. Remove the pen tip and nib using a pair of pliers. These components are
recycleable where facilities exist.
2. Insert one of the replacement pen tips and nibs into the pen.
The pen’s LED light glows when you press the pen against the interactive
whiteboard’s screen.
First Published December 3, 2008
©2008 SMART Technologies ULC. All rights reserved. SMART Board, the SMART logo and smarttech are trademarks or registered trademarks of SMART Technologies ULC in the U.S. and/
or other countries. All otherthird-party product and company names may be trademarks of their respective owners. Patent No.US5448263; US6141000; US6326954; US6337681; US6741267;
US6747636; US6803906; US6919880; US6947032; US6954197; US6972401; US7151533; US7184030; US7236162; CA2058219, CA2453873; CA2386094; and EP1297488. Other patents
pending. Contents are subject to change without notice. 12/2008.