SMART Inforce 67X1 User manual

Confidential and Proprietary –SMART Wireless Computing Inc.
NO PUBLIC DISCLOSURE PERMITTED: Please report postings of this document on public
servers or web sites to: [e-mail].
Restricted Distribution: Not to be distributed to anyone who is not an employee of either
SMART Global Holdings or its subsidiaries without the express approval of SMART Wireless
Computing.
Not to be used, copied, reproduced, or modified in whole or in part, nor its contents revealed in
any manner to others without the express written permission of SMART Wireless Computing, Inc.
All SMART Wireless Computing Incorporated trademarks are used with permission. Other product
and brand names may be trademarks or registered trademarks of their respective owners.
This technical data may be subject to U.S. and international export, re-export, or transfer
(“export”) laws. Diversion contrary to U.S. and international law is strictly prohibited.
SMART Wireless Computing Inc.
39870 Eureka Dr.
Newark CA 94560
U.S.A.
© 2020 SMART Wireless Computing, a SMART Global Holdings Company
Inforce 67X1
User Guide
Rev A
November 18, 2021
Submit technical questions at:
http://www.smartwirelesscomputing.com/techweb/

Inforce 67X1User Guide Revision History
Rev A MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION i
Confidential and Proprietary –SMART Wireless Computing, Inc.
Provided under NDA
Revision History
Revision
Date
Description
Author
A
November 18, 2021
Initial Release
DD
Approval Record
Function
Name
Date
Reviewed By
DJ, VPS
November 18, 2021
Approved By
PSD
November 18, 2021

Inforce 67X1User Guide License Agreement
Rev A MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION ii
Confidential and Proprietary –SMART Wireless Computing, Inc.
Provided under NDA
License Agreement
Your use of this document is subject to and governed by those terms and conditions in the Inforce
Computing Purchase and Software License Agreement for the SDA845 based Inforce 67X1 board, which
you or the legal entity you represent, as the case may be, accepted and agreed to when purchasing a
Inforce 67X1 board from SMART Wireless Computing Inc. (“Agreement”). You may use this document,
which shall be considered part of the defined term “Documentation” for purposes of the Agreement, solely
in support of your permitted use of the Inforce 67X1 board under the Agreement. Distribution of this
document is strictly prohibited without the express written permission of SMART Wireless Computing Inc.
and its respective licensors, which they can withhold, condition or delay in its sole discretion.
Qualcomm® is a trademark of Qualcomm Inc., registered in the United States and other countries. Other
product and brand names used herein may be trademarks or registered trademarks of their respective
owners.
This document contains technical data that may be subject to U.S. and international export, re-export, or
transfer (“export”) laws. Diversion contrary to U.S. and international law is strictly prohibited.

Inforce 67X1User Guide Preface
Rev A MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION iii
Confidential and Proprietary –SMART Wireless Computing, Inc.
Provided under NDA
Preface
This User Guide explains Usage of the Inforce 67X1 board.
Intended Audience
This Hardware Reference Manual is intended for technically qualified personnel. It is not intended for
general audiences.
Document Organization
The chapters in this document are arranged as follows:
1. Scope
2. Hardware Specifications
3. Mechanical Specifications
4. Appendix A
5. Contact Information
Conventions
The following conventions are used in this document:
CAUTION
Cautions warn the user about how to prevent damage to hardware or loss of data.
NOTE
Notes call attention to important information.
Note
This document is subject to change without notice.
Carrier parts are shown in some of the sections for better understanding.
Support Information
Every effort has been made to ensure the accuracy of the Hardware Reference Manual. If you have any
comments, questions, or ideas regarding this document, contact SMART Wireless’s technical support at
[e-mail].

Inforce 67X1User Guide Terminology
Rev A MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION iv
Confidential and Proprietary –SMART Wireless Computing, Inc.
Provided under NDA
Terminology
The table below gives descriptions to some common terms used in the Hardware Reference Manual.
Term
Description
BLE
Bluetooth Low Energy
bps
Bits Per Second
CSI
Camera Serial Interface
DDR
Double Data Rate
DS
Default Speed
DSI
Display Serial Interface
DSP
Digital Signal Processing
GPIO
General-Purpose Input/Output
GPS
Global Positioning System
GPU
Graphical Processing Unit
HPH
Head Phone
HS
High Speed
HVX
Hexagon Vector Extensions
I2C
Inter-Integrated Circuit
JTAG
Joint Test Action Group
LDO
Low Drop Out
LED
Light-Emitting Diode
LPDDR
Low-power DDR
MIC
Microphone
MIPI
Mobile Industry Processor Interface
OTG
On The Go
PCIe
Peripheral Component Interconnect Express
PMIC
Power Management IC
PoP
Package On Package
PU
Pull Up
RF
Radio Frequency
SDC
Secure digital controller
SDIO
Secured Data Input/output
SDR
Single Data Rate
SLIM bus
Serial Low-power Inter-chip Media Bus
SOC
System On Chip
SOM
System on Module
SPI
Serial Peripheral Interface
SPMI
System power management interface
UART
Universal Asynchronous Receiver Transmitter
USB
Universal Serial Bus
WLAN
Wireless local area network

Inforce 67X1User Guide Table of Contents
Rev A MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION v
Confidential and Proprietary –SMART Wireless Computing, Inc.
Provided under NDA
Table of Contents
1. SCOPE................................................................................................................................ 1
2. HARDWARE SPECIFICATIONS............................................................................................ 2
2.1 ARCHITECTURE ..........................................................................................................................2
2.1.1 SYSTEM OVERVIEW.............................................................................................................3
2.1.2 WI-FI AND BLUETOOTH INTERFACE...................................................................................5
2.1.3 GPS INTERFACE...................................................................................................................6
3. MECHANICAL SPECIFICATIONS ......................................................................................... 7
3.1 BOARD DIMENSIONS..................................................................................................................7
3.2 TOP FLOOR PLAN .......................................................................................................................8
3.3 BOTTOM FLOOR PLAN................................................................................................................8
4. USAGE ............................................................................................................................... 9
5. APPENDIX A..................................................................................................................... 10
5.1 SOM CONNECTORS..................................................................................................................10
5.2 IO CONNECTOR GPIOS.............................................................................................................13
5.3 ELECTRICAL SPECIFICATIONS OF PINS .................................................................................14
5.4 RF CONNECTORS.....................................................................................................................14
6. COMPLIANCE INFORMATION............................................................................................ 15
6.1 FCC COMPLIANCE STATEMENT...............................................................................................15
6.2 EU COMPLIANCE STATEMENT.................................................................................................15
6.3 THE (A) FREQUENCY BAND(S) IN WHICH THE RADIO EQUIPMENT OPERATES AND (B)
MAXIMUM RADIO FREQUENCY POWER TRANSMITTED IN THE FREQUENCY BAND(S) IN
WHICH THE RADIO EQUIPMENT OPERATES................................................................................15
6.4 FCC RADIATION EXPOSURE STATEMENT ..............................................................................15
7. JAPAN WARNING STATEMENT......................................................................................... 16
8. CONTACT INFORMATION.................................................................................................. 17

Inforce 67X1User Guide Table of Figures
Rev A MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION vi
Confidential and Proprietary –SMART Wireless Computing, Inc.
Provided under NDA
Table of Figures
Figure 1: Block Diagram .................................................................................................................2
Figure 2: Inforce 67X1 Board (Top Side)...........................................................................................3
Figure 3: Inforce 67X1 Board (Bottom Side)......................................................................................4
Figure 4: Wi-Fi and Bluetooth Implementation...................................................................................5
Figure 5: GPS ................................................................................................................................6
Figure 6: Board Dimensions ............................................................................................................7
Figure 7: Top Floor Plan .................................................................................................................8
Figure 8: Bottom Floor Plan.............................................................................................................8

Inforce 67X1User Guide Table of Tables
Rev A MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION vii
Confidential and Proprietary –SMART Wireless Computing, Inc.
Provided under NDA
Table of Tables
Table 1: Inforce 67X1 Board Overview .............................................................................................1
Table 2: Inforce 67X1 Board Locations .............................................................................................3
Table 3: Connector IO interface 1 Pin out (Ref Des P1) .................................................................... 10
Table 4: Connector IO interface 2 Pin out (Ref Des P3) .................................................................... 10
Table 5: Connector IO interface 3 Pin out (Ref Des P2) .................................................................... 12
Table 6: IO CONNECTOR GPIOs .................................................................................................... 13
Table 7: IO CONNECTOR Power specifications................................................................................. 14
Table 8: IO specifications.............................................................................................................. 14

Inforce 67X1User Guide Scope
Rev A MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 1
Confidential and Proprietary –SMART Wireless Computing, Inc.
Provided under NDA
1. SCOPE
This document describes the Usage of Qualcomm SDA845-based Inforce 67X1 SOM.
Overview
The table below presents a brief overview of Inforce 67X1 board.
Table 1: Inforce 67X1 Board Overview
Processor
Processor
Qualcomm® Snapdragon™845 Processor (PoP package) SDA845 SoC
Memory Devices
Main Memory
and Storage
4GB LPDDR4X, 1866Mhz
64GB UFS 2.1
SOM Interfaces
Interfaces
1× USB v3.1 Gen 1 (Host)
1× USB v3.1 Gen 1Type C (Device mode, Host
mode, DP, Debug)
2x 4 lane MIPI-DSI
1×UART(Debug)
3× 4 Lane MIPI-CSI(D-PHY & C-PHY)
2x Camera Control I2C,
1× PCIe Gen 2
1x PCIe Gen 3
2× MHF4-WiFi/BT,
1× MHF4 –GPS
1× 4 bit SDC for SDcard
2× Line Out
1x Ear out
5× Mic In
1× Headphone Out,
1xSlimBUS1
1x MI2S
1x Sensor Core I2C
1x Backlight Regulator
10x Regulator Out
Form Factor
Mechanical
50mm×28mm
Tolerance +/- 0.2mm
Power
Power Input
VBAT (+3.2 to +4.5V)
Others
Temperature
Specification
Commercial Grade
NOTE
1. Speaker I2S function multiplexed.
2. Pins can have dedicated functions and other multiple functions - GPIO, QUP functions (I2C,
UART, SPI),MI2S, Camera Controls, Debug.

Inforce 67X1User Guide Hardware Specifications
Rev A MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 2
Confidential and Proprietary –SMART Wireless Computing, Inc.
Provided under NDA
2. HARDWARE SPECIFICATIONS
2.1 ARCHITECTURE
The functional diagram of the Inforce 67X1 SOM is shown below.
Figure 1: Block Diagram
SDA845
Octa Core
SOC
IO2
100
Pin
HDR
(P2)
4 lane MIPI-DSI 1
4 lane MIPI-DSI 0
UFS
Primary Boot
JTAG
Debug UART1
4 lane MIPI-CSI 0
Display & Touch Controls1
IO1
100
Pin
HDR
(P3)
4 lane MIPI-CSI 2
CCI1 I2C1
Ver- 0.1
20190116
USB TYPE C WITH DP
USB2 HS HOST
UFS
2.1
Flash Control1
x1PCIe Gen 3
CAM Controls1
SDC2 (4bit)
POP
LPDDR4x
RAM
CCI0 I2C1
WCN3990
2x
MHF4 PCM
UART
Audio
Codec
WCD9340
HPH_L
HPH_R
3x MIC SLIMBUS
2x Line Out
SLIMBUS/SPKR_I2S
MBHC
VBAT2
VBAT2
POWER_ON
VOL +
SPMI
RESET (VOL -)
VREG_S4A_1P8
4xBoot Config1
PM845
PMI8998
GPS
SDR845 QLINK
USB TYPE C CC Pins
MHF4
PMIC_GPIO
2x CAM MCLKs1
VREG_L13A_2P95
MI2S1
APQ_GPIOs1
1Pins can be configured asGPIO and some GPIOs can
support multiple BLSP functions (I2C,UART,SPI,UIM)
2VBAT Power Input
3VCOIN support 2V to 3.25V
VREG_L21A_2P95
SLIMBUS/SPKR_I2S
VCOIN3
VBUS_USB_IN
2X DMIC
IO3 100 Pin HDR (P1)
4 Lane MIPI-CSI 1
2x CAM MCLK1
VBAT2
VCOIN3
APQ_GPIOs1
VPH
Analog
1x SPKR
PM8005
USB2 SS SIGNALS
WLED
BACKLIGHT
PMIC REGs
2X ANLG MIC
BATTERY
CONTROLS
VBUS_
USB_IN
x1PCIe Gen 2

Inforce 67X1User Guide Hardware Specifications
Rev A MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 3
Confidential and Proprietary –SMART Wireless Computing, Inc.
Provided under NDA
2.1.1 SYSTEM OVERVIEW
The Inforce 67X1 SOM is based on the Qualcomm Octa-core SDA845.
Figure 2: Inforce 67X1 Board (Top Side)
Table 2: Inforce 67X1 Board Locations
1
WIFI/BT connector
2
WIFI connector
3
GPS Connector
4
SOM Connectors
1
3
2

Inforce 67X1User Guide Hardware Specifications
Rev A MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 4
Confidential and Proprietary –SMART Wireless Computing, Inc.
Provided under NDA
Figure 3: Inforce 67X1 Board (Bottom Side)
4

Inforce 67X1User Guide Hardware Specifications
Rev A MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 5
Confidential and Proprietary –SMART Wireless Computing, Inc.
Provided under NDA
2.1.2 WI-FI AND BLUETOOTH INTERFACE
WCN3990 WiFi/Bluetooth SoC
WLAN: 802.11ac, MU-MIMO
160 MHz & DBS(Dual Band Simultaneous) support
Support Bluetooth 5.0
BT audio over SLIMbus
2× MHF4 Connector for external antenna
Figure 4: Wi-Fi and Bluetooth Implementation

Inforce 67X1User Guide Hardware Specifications
Rev A MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 6
Confidential and Proprietary –SMART Wireless Computing, Inc.
Provided under NDA
2.1.3 GPS INTERFACE
Support for location via SDR845
Support GPS, GLONASS, Galileo, BeiDou
QLINK interface to host
MHF4 connector for external antenna interface
Support for external active antenna (default 1.8V power)
Figure 5: GPS
SDA845
PM845
VREG_L15A
VREG_L11A
VREG_L3A
VREG_L8A
VREG_L15A
VREG_S4
QLINK_CLK_P/M
QLINK_TX_P/M
QLINK_RX0_P/M
QLINK_RX1_P/M
QLINK_RX2_P/M
SDR845
VREG_L15A_1P8
VREG_L11A_1P0
RF
VREG_L8A_1P2
VREG_L3A_1P0
VREG_S4A_1P8_DIG
LNA
SAW Filter SAW Filter
MHF4
VPH_PWR

Inforce 67X1User Guide Mechanical Specifications
Rev A MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 7
Confidential and Proprietary –SMART Wireless Computing, Inc.
Provided under NDA
3. MECHANICAL SPECIFICATIONS
3.1 BOARD DIMENSIONS
Dimensions : 50 × 28mm
Tolerance : +/-0.2mm
Layers : 10
PCB Thickness : 1mm
Figure 6: Board Dimensions

Inforce 67X1User Guide Mechanical Specifications
Rev A MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 8
Confidential and Proprietary –SMART Wireless Computing, Inc.
Provided under NDA
3.2 TOP FLOOR PLAN
Figure 7: Top Floor Plan
3.3 BOTTOM FLOOR PLAN
Figure 8: Bottom Floor Plan

Inforce 67X1User Guide usage
Rev A MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 9
Confidential and Proprietary –SMART Wireless Computing, Inc.
Provided under NDA
4. USAGE
Connect SOM on Inforce Development Kit or custom carrier based on the design
Make sure respective RF antennas are connected as per the hardware reference manual before
powering the device

Inforce 67X1User Guide Appendix A
Rev A MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 10
Confidential and Proprietary –SMART Wireless Computing, Inc.
Provided under NDA
5. APPENDIX A
5.1 SOM CONNECTORS
Manufacturer : Samtec
Manufacturer Part : ST4-50-1.50-L-D-P-TR
Table 3: Connector IO interface 1 Pin out (Ref Des P1)
Pin
Net
Comments
QUP
Pin
Net
Comments
Voltage
1
VBAT
Power input
2
V3V3
Leave as NC
3
VBAT
Power input
4
VBAT
Power input
5
CDC_LINE_OUT2_P
Audio
6
CAM_MCLK2
7
CDC_IN3_P
Audio
8
CODEC_MCLK
9
CDC_EAR_P
Audio
10
CCI_I2C_SCL1
QUP_L3(1)
11
CDC_EAR_M
Audio
12
CAM_MCLK0
13
CDC_IN4_P
Audio
14
CCI_I2C_SDA1
QUP_L2(1)
15
CDC_LINE_OUT1_P
Audio
16
GND
17
SLIMBUS_DATA1_CARRIER
18
MIPI_CSI0_LANE0_N
Camera
19
GND
20
MIPI_CSI0_LANE0_P
Camera
21
MIPI_CSI2_LANE3_P
Camera
22
GND
Camera
23
MIPI_CSI2_LANE3_N
Camera
24
MIPI_CSI0_CLK_N
Camera
25
GND
Camera
26
MIPI_CSI0_CLK_P
Camera
27
MIPI_CSI2_LANE2_N
Camera
28
GND
Camera
29
MIPI_CSI2_LANE2_P
Camera
30
MIPI_CSI0_LANE1_P
Camera
31
GND
Camera
32
MIPI_CSI0_LANE1_N
Camera
33
MIPI_CSI2_LANE1_P
Camera
34
GND
Camera
35
MIPI_CSI2_LANE1_N
Camera
36
MIPI_CSI0_LANE2_N
Camera
37
GND
Camera
38
MIPI_CSI0_LANE2_P
Camera
39
MIPI_CSI2_CLK_N
Camera
40
GND
Camera
41
MIPI_CSI2_CLK_P
Camera
42
MIPI_CSI0_LANE3_N
Camera
43
GND
Camera
44
MIPI_CSI0_LANE3_P
Camera
45
MIPI_CSI2_LANE0_N
Camera
46
GND
Camera
47
MIPI_CSI2_LANE0_P
Camera
48
49
GND
Camera
50
51
MIPI_DSI1_LANE3_P
Display
52
GND
53
MIPI_DSI1_LANE3_N
Display
54
55
GND
Display
56
57
MIPI_DSI1_LANE2_P
Display
58
GND
59
MIPI_DSI1_LANE2_N
Display
60
61
GND
Display
62
63
MIPI_DSI1_LANE1_N
Display
64
GND
65
MIPI_DSI1_LANE1_P
Display
66
67
GND
Display
68
69
MIPI_DSI1_LANE0_P
Display
70
GND
71
MIPI_DSI1_LANE0_N
Display
72
MIPI_DSI0_LANE3_N
Display
73
GND
Display
74
MIPI_DSI0_LANE3_P
Display
75
MIPI_DSI1_CLK_N
Display
76
GND
Display
77
MIPI_DSI1_CLK_P
Display
78
MIPI_DSI0_LANE2_N
Display
79
GND
Display
80
MIPI_DSI0_LANE2_P
Display
81
CDC_IN2_P
Mic In
82
GND
Display
83
CDC_HPH_R
Headphone Out
84
MIPI_DSI0_LANE1_P
Display
85
CDC_HPH_REF
Headphone Out
86
MIPI_DSI0_LANE1_N
Display
87
CDC_HPH_L
Headphone Out
88
GND
Display
89
PHONE_ON_N
Power ON
90
MIPI_DSI0_LANE0_P
Display
91
PM_RESIN_N
Vol-/ Reset
92
MIPI_DSI0_LANE0_N
Display
93
APQ_GPIO_93
GPIO
QUP_L0(7)
94
GND
Display
95
APQ_GPIO_94
GPIO
QUP_L1(7)
96
MIPI_DSI0_CLK_P
Display
97
VREG_S4A_1P8
1.8V Out
98
MIPI_DSI0_CLK_N
Display
99
VREG_S4A_1P8
1.8V Out
100
GND
Display
Table 4: Connector IO interface 2 Pin out (Ref Des P3)
Pin
Net
Comments
QUP
Pin
Net
Comments
Voltage
1
VBAT
Power input
2
VBAT
Power input
3
VBAT
Power input
4
VBAT
Power input
5
CAM2_RST_N
QUP_L0(0)
6
FLASH_STROBE_TRIG
7
CAM0_STANDBY_N
8
WDOG_DISABLE
9
USB_CC2_R
USB
10
VOL_UP_N
11
FORCE_USB_BOOT
12
APQ_GPIO_81_OR_82
QUP_L0(15)
13
BOOT_CONFIG_1
14
USB_VBUS

Inforce 67X1User Guide Appendix A
Rev A MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 11
Confidential and Proprietary –SMART Wireless Computing, Inc.
Provided under NDA
15
CAM0_RST_N
QUP_L3(0)
16
APQ_GPIO_84_OR_81
QUP_L3(15)
17
FLASH_STROBE_EN
18
APQ_GPIO_82_OR_83
QUP_L1(15)
19
CCI_I2C_SDA0
QUP_L0(1)
20
APQ_GPIO_83_OR_80
QUP_L2(15)
21
CCI_I2C_SCL0
QUP_L1(1)
22
USB_CC1
USB
23
GND
24
USB
25
USB1_SS_RX1_M
USB
26
USB_SBU1
USB
27
USB1_SS_RX1_P
USB
28
USB_SBU2
USB
29
GND
USB
30
GND
USB
31
USB1_HS_DP
USB
32
USB1_SS_TX1_M
USB
33
USB1_HS_DM
USB
34
USB1_SS_TX1_P
USB
35
GND
USB
36
GND
USB
37
USB2_HS_DP
USB
38
USB1_SS_RX0_M
USB
39
USB2_HS_DM
USB
40
USB1_SS_RX0_P
USB
41
GND
USB
42
GND
USB
43
TS_I2C_SCL
Touch
QUP_L1(5)
44
USB1_SS_TX0_M
USB
45
TS_I2C_SDA
Touch
QUP_L0(5)
46
USB1_SS_TX0_P
USB
47
BACKLIGHT_EN
Backlight Enable Out
QUP_L3(5)
48
APQ_GPIO_31_OR_SSC_0
QUP_L0(11)
49
APQ_GPIO_90
QUP_L1(4)
50
APQ_GPIO_32_OR_SSC_1
QUP_L1(11)
51
TP_INT_N
Touch
52
MSM_RESOUT_N
53
PMI8998_GPIO_05
PMIC GPIO/PWM
Out
54
APQ_GPIO_58
55
TP_RST_N
Touch
QUP_L2(0)
56
BOOT_CONFIG_2
57
LCD_RST_N
Display Reset
QUP_L2(5)
58
JTAG_PS_HOLD
59
APQ_GPIO_89
QUP_L0(4)
60
SD_CARD_DET_N
Sdcard
61
MSM_UART_TX
Debug UART
QUP_L2(9)
62
VREG_L13A_2P95
Sdcard
63
MSM_UART_RX
Debug UART
QUP_L3(9)
64
SDC2_DATA2
Sdcard
65
GND
66
SDC2_DATA1
Sdcard
67
SLIMBUS_DATA0_CARRIER
Slim Bus
68
SDC2_CLK
Sdcard
69
SLIMBUS_CLK_CARRIER
Slimbus
70
SDC2_DATA3
Sdcard
71
GND
72
SDC2_CMD
Sdcard
73
PCIE1_REFCLK_P
pcie
74
SDC2_DATA0
Sdcard
75
PCIE1_REFCLK_N
pcie
76
VREG_L21A_2P95
Sdcard
77
GND
pcie
78
MSM_JTAG_TRST_N
jtag
79
PCIE1_TX_P
pcie
80
MSM_JTAG_SRST_N
jtag
81
PCIE1_TX_M
pcie
82
MSM_JTAG_TDO
jtag
83
GND
pcie
84
MSM_JTAG_TDI
jtag
85
PCIE1_RX_P
pcie
86
MSM_JTAG_TCK
jtag
87
PCIE1_RX_M
pcie
88
MSM_JTAG_TMS
jtag
89
GND
pcie
90
CDC_HSDET_L
Headset Detect
91
PCIE1_CLKREQ_N
pcie
92
APQ_GPIO_1
QUP_L1(0)
93
PCIE1_WAKE_N
pcie
94
CAM2_STANDBY_N
QUP_L0(2)
95
PCIE1_RST_N
pcie
96
SOM_OPTION
Options (Auto Boot/ Charger Disable)
Leave As
NC
97
APQ_GPIO_95
QUP_L2(7)
98
VCOIN_R
Options
99
APQ_GPIO_96
QUP_L3(7)
100
USB_VBUS_R
Options

Inforce 67X1User Guide Appendix A
Rev A MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 12
Confidential and Proprietary –SMART Wireless Computing, Inc.
Provided under NDA
Table 5: Connector IO interface 3 Pin out (Ref Des P2)
Pin
Net
Comments
Voltage
Pin
Net
Comments
Voltage
1
GND
PCIE
2
GND
Camera
3
PCIE0_REFCLK_N
PCIE
4
MIPI_CSI1_CLK_N
Camera
5
PCIE0_REFCLK_P
PCIE
6
MIPI_CSI1_CLK_P
Camera
7
GND
PCIE
8
GND
Camera
9
PCIE0_RX_M
PCIE
10
MIPI_CSI1_LANE0_N
Camera
11
PCIE0_RX_P
PCIE
12
MIPI_CSI1_LANE0_P
Camera
13
GND
PCIE
14
GND
Camera
15
PCIE0_TX_M
PCIE
16
MIPI_CSI1_LANE1_P
Camera
17
PCIE0_TX_P
PCIE
18
MIPI_CSI1_LANE1_N
Camera
19
GND
PCIE
20
GND
Camera
21
PCIE0_RST_N
PCIE
22
MIPI_CSI1_LANE2_N
Camera
23
PCIE0_CLKREQ_N
PCIE
24
MIPI_CSI1_LANE2_P
Camera
25
PCIE0_WAKE_N
PCIE
26
GND
Camera
27
VCOIN
RTC
28
MIPI_CSI1_LANE3_N
Camera
29
WLED_SINK1
Backlight
30
MIPI_CSI1_LANE3_P
Camera
31
WLED_SINK2
Backlight
32
GND
Camera
33
WLED_SINK3
Backlight
34
USB2_SS_RX_M
USB
35
WLED_SINK4
Backlight
36
USB2_SS_RX_P
USB
37
VREG_WLED
Backlight
38
GND
USB
39
VREG_WLED
Backlight
40
USB2_SS_TX_M
USB
41
GND
Backlight
42
USB2_SS_TX_P
USB
43
CABC
Backlight
44
GND
USB
45
46
CAM_MCLK3
47
48
CAM_MCLK1
49
VBAT
Power
50
CAM1_STANDBY_N
51
VBAT
Power
52
CAM1_RST_N
QUP_L1(2)
53
VREG_BOB
LDO
54
GND
55
VREG_L16A_2P7
LDO
56
57
VREG_L18A_2P7
LDO
58
USB_VBUS
Power and battery
59
VREG_L19A_3P0
LDO
60
USB_VBUS
Power and battery
61
VREG_L19A_3P0
LDO
62
USB_VBUS
Power and battery
63
VREG_L14A_1P8
LDO
64
VBAT
Power and battery
65
VREG_L28A_3P0
LDO
66
VBAT
Power and battery
67
VREG_L22A_2P85
LDO
68
GND
Power and battery
69
70
VPH_PWR
Power and battery
71
CDC_IN1_P
Audio
72
VPH_PWR
Power and battery
73
CDC_IN1_M
Audio
74
VPH_PWR
Power and battery
75
MIC_BIAS1
Audio
76
BATT_THERM
Power and battery
77
CDC_IN5_P
Audio
78
BATT_ID
Power and battery
79
CDC_IN5_M
Audio
80
VBATT_CONN_VSENSE_M
Power and battery
81
CDC_DMIC_CLK1
Audio
82
VBATT_CONN_VSENSE_P
Power and battery
83
CDC_DMIC_DATA1
Audio
84
MIC_BIAS3
85
CDC_DMIC_CLK2
Audio
86
MIC_BIAS4
87
CDC_DMIC_DATA2
Audio
88
GND
89
GND
90
91
92
93
94
95
96
97
98
99
100