SMITH SYSTEM 26500 User manual

For Assistance in assembling product, missing or damaged parts,
or to place an order, please contact customer service at 800-328-1061
You may also place your order online at
www.smithsystem.com
Form# 179969 01/2014
Half Moon
Assembly Instructions
(Model# 26500 & 26501)

For Assistance in assembling product, missing or damaged parts,
or to place an order, please contact customer service at 800-328-1061
You may also place your order online at
www.smithsystem.com
Form# 179969 01/2014
Special Notes:
1. Check that all components are accounted for and undamaged before assembling.
2. Please assemble product in a clean and dry area.
3. For larger units, you may need another person to help assemble the product.
4. Clean the product with a mild cleaner and a damp cloth.
Tools
You will need a Phillips Head Screwdriver.
Hardware and Components
*Our Acrobat Workstations come in different lengths and shapes, so hardware and screw hole
placement will vary. If you feel you have not received all of the necessary hardware, please call us at
800-328-1061.
Replacement Pack 69755 includes (Need 2):
77471 (Qty. 16) 1/4-20X1/2” Combo Drive Machine Screw
70226 (Qty. 8) 10-32X1/2” Machine Screw
77482 (Qty. 2) Tinnerman Clip
70054 (Qty. 16) SM Screw #10X3/4 HI/LO PTH
#10 Wood Screws
(Qty. 32)*
P/N-70054
1/4-20X1/2” Machine Screw
(Qty. 24)*
P/N-77471
Leg Sets (Qty. 2)
(2 legs per set)
Table Top (Qty.1)
Tinnerman Clips
(Qty. 4)
P/N-77482
Modesty Panel (Qty. 2)

For Assistance in assembling product, missing or damaged parts,
or to place an order, please contact customer service at 800-328-1061
You may also place your order online at
www.smithsystem.com
Form# 179969 01/2014
Assembly Instructions
Step 1: Lay the top upside down, laminate side facing down and predrilled holes facing up.
Step 2: Align, but do not attach, the leg sets and the modesty panels with the predrilled holes in
the top.
Step 3: Attach the modesty panels to the leg sets using (2) ¼-20 Machine Screws per panel to
leg.

For Assistance in assembling product, missing or damaged parts,
or to place an order, please contact customer service at 800-328-1061
You may also place your order online at
www.smithsystem.com
Form# 179969 01/2014
Step 4: Attach the legs and the modesty panels to the top using (22) wood screws (4 per leg and
3 per panel).
Step 5: Set the legs to the desired height by removing the (4) ¼-20 screws already in the leg sets
and sliding out the bottom of the leg set. When legs are at desired height, reinstall the ¼-20
screws.
Install (1) Tinnerman Clip per leg in the square hole located inside of the leg.
*NOTE: The Tinnerman Clip is only used if the desk is raised to a high range, when set to
a low range, threaded holes in the lower leg will be used instead of the Tinnerman Clip.
Step 6: With assistance, flip the desk back onto its legs. Your desk is now ready for use. Enjoy!