SMITH SYSTEM 21088 User manual

For assistance in assembling product, missing or damaged parts, or to place
an order please contact customer service at 1-800-328-1061. You may also
place your order online at
www.smithsystem.com
2009 Booktruck Riser Shelf
Assembly Instructions
Special Notes:
1. Check that all components are accounted for and undamaged before assembling.
2. Please assemble product in a clean and dry area.
3. For larger units you may need another person to help assemble the product.
4. Clean the product with a mild cleaner and a damp cloth.
Form #179947
Page 1 of 3
Rev. 05/2009.
Booktruck Shelf Part Numbers:
21109 _ _ _/_ _/PL

Special Notes:
1. Check that all components are accounted for and undamaged before
assembling.
2. Please assemble product in a clean and dry area.
3. For larger units you may need another person to help assemble the product.
4. Clean the product with a mild cleaner and a damp cloth.
Tools/Hardware
***All tools and Hardware are supplied with the Riser Leg Set***
Components:
Notes:
If you have damaged or missing components or hardware please
contact customer service at 1-800-328-1061
Form #179947
Page 2 of 3
Rev. 05/2009
1. Booktruck Shelf
2. Wood Screws (x8)
1. Hex Key
1. Booktruck Shelf Leg Set

2009 Booktruck Shelf Assembly Instructions
Step 1: Locate your Booktruck Shelf and your Booktruck shelf leg set. Begin by turning the Booktruck Shelf
laminate side down on a clean, dry surface. Place (ea) one of your riser legs on the Shelf and line up
the pre-drilled holes to the booktruck shelf leg. Attach the Booktruck shelf leg using the supplied wood
screws and a phillips #2 bit. (Repeat this step with all 4 Riser Legs).
Form #179947 Page 3 of 3
Rev. 05/2009
Step 2: With your Booktruck Shelf Assembled, it is now time to attach the legs to your Booktruck.
Step 3: Loosen and remove the bolt from each Riser Leg in order to slide the leg clamp around the booktruck
handle. With the bolts removed, slide the legs over the booktruck handles and re-assemble each of the
4 Riser Legs. Once all legs are tightened into place, your Booktruck Shelf is ready for use.