John Thomas T-3872TA User manual

ITEM NO.: T-3872TA AND T-3872TB
ISSUED FEB 15, 2019
Printed in Vietnam
THIS ITEM IS PACKED IN 2 CARTONS
- 1 -
ASSEMBLY INSTRUCTIONS
Description
Item No.
: 38X72 CHIC TRESTLE TABLE
: T-3872TA AND T-3872TB

ITEM NO.: T-3872TA AND T-3872TB
ISSUED FEB 15, 2019
Printed in Vietnam
THIS ITEM IS PACKED IN 2 CARTONS
- 2 -
BEFORE ASSEMBLY
Thank you for purchasing this quality product. This product has been designed for easy assembly
and constructed for durability. All parts were checked prior to packaging to insure quality. Prior to
beginning assembly, however, make sure all parts and hardware are included and free of obvious
defect. If a part is missing or defective, please contact the store where purchased. If hardware is
missing, or you need help with assembly, please call toll free 888-944-8396.
IMPORTANT NOTE:
-Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the
parts from being scratched.
-Remove all wrapping material, including staples & packing straps before you start to
assemble.
-DO NOT tighten all screws, bolts until completely assembled.
-Keep all hardware parts out of reach of children.
WARNING:
-Long exposure to rubber or soft plastic may cause a chemical reaction and damage the
finish of your table. Protect the surface of the table with cloth if you are using any product
with rubber feet or base.

ITEM NO.: T-3872TA AND T-3872TB
ISSUED FEB 15, 2019
Printed in Vietnam
THIS ITEM IS PACKED IN 2 CARTONS
- 3 -
PART LIST T-3872TA
When unpacking, please be careful not to discard any parts with the packaging. Before continuing,
please make sure you have the following parts:
NO
Description
Qty
Sketch
NO
Description
Qty
Sketch
A
Top
1
B
Cross Bar
1
PART LIST T-3872TB
When unpacking, please be careful not to discard any parts with the packaging. Before continuing,
please make sure you have the following parts:
NO
Description
Qty
Sketch
NO
Description
Qty
Sketch
C
Base
2
D
Side
Decoration
2
HARDWARE LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing,
please make sure you have all of the following hardware:
NOTE: HARDWARE IS PACKED IN CARTON T-3872TB.
NO
Description
Qty
Sketch
NO
Description
Qty
Sketch
1
Short Bolt
(M8 x 45mm)
12
2
Long Bolt
(M8 x 120mm)
2
3
Lock Washer
(8.5 x13mm)
12
4
Flat Washer
(2 x 8.5 x19mm)
12
5
U –Washer
M8
2
6
Allen Key
(M4 x 30mm x 110mm)
1

ITEM NO.: T-3872TA AND T-3872TB
ISSUED FEB 15, 2019
Printed in Vietnam
THIS ITEM IS PACKED IN 2 CARTONS
- 4 -
STEP 1
Insert crossbar (B) and side decorations (D) into the bases (C) as shown below, and then attach with
bolts (2) and u-washers (5). Tighten with Allen key (6).

ITEM NO.: T-3872TA AND T-3872TB
ISSUED FEB 15, 2019
Printed in Vietnam
THIS ITEM IS PACKED IN 2 CARTONS
- 5 -
STEP 2
Attach the bases (C) to top (A) with bolts (1), and washers (3) and (4) as shown below. Tighten with Allen key (6).