2
You can call in many different ways. Dial the whole number, press speed dial or search for a contact in your
contact list and then call.
Call with your Snom phone
2.1. Dial a phone number
1) Enter the full phone number
2) Press the 5 button
2.2. Call with speed dial
1) Press one of the One-Touch keys for the one you
want to call among the F3-F5 buttons.
2.3. Call a contact in the contact list
1) Press the 3rd button from the left in box 4.
2) Scroll your contacts with the up and down arrows
with button 6.
3) Press button 5 to call the highlighted contact.
2.4. Search a contact and place call
You can search the contacts in the contact list
(Snom 720 and 760 only)
1) Press the ”Directory” button in elds F1-F5.
2) Enter letters to start searching, the more letters
you enter, the more accurate your search will be.
3) To call the found contact, press 5.
2.5. Callback
You can redial the last dialed number.
1) Press the ”Log” button, the rst button from the left
in box 4.
2) Browse the most recently dialed, missed and
received numbers with the arrows on button 6.
3) Press button 5 to dial the selected number or
contact.
2.6. Receive phone calls
When a call comes in, lift the handset to answer.
You can answer with button 5 to answer the
speakerphone.
2.7. Put a call on hold
1) Push the ongoing call by pressing
”Park”, second button on the left in box 4.
2) To answer the call, press button 5.
3Disconnect calls (call transfer)
3.1. Unattended call flow
Connecting calls attended allows you to rst talk to
the person you are going to connect the call to, then
you will nd out if this person can receive the call.
1) Pause the ongoing call by pressing ”Park”, second
button on the left in box 4.
2) Call the person to whom you are going to make the
call.
3) Now you have the opportunity to ask if the person
can receive the call, if so press button ”Connect” in
box 4 and then button 5.
3.2. Attended call flow
You can conect the calling party to someone else.
An unattended call flow means that you forward the
call directly, without knowing if the receiving party is
available or on the phone.
1) During an ongoing call, press the ”connect” button,
the rst button on the left in eld four.
2) Dial the number you want to dial,
then press button 5.
