SOLTEK KT400-R User manual

4
KT400-R / KT400-RL
Contents
Chapter 1 Specification ............................................. 8
1-1 KT400-R/KT400-RL Mainboard Layout** .........................9
1-2 Mainboard Specifications .................................................... 10
1-2.1 CPU Socket ................................................................................... 10
1-2.2 System Chipsets ........................................................................... 10
1-2.3 Memory ......................................................................................... 10
1-2.4 BIOS............................................................................................... 10
1-2.5 Accelerated Graphics Port (AGP) Interface........................... 10
1-2.6 Advanced System Power Management .................................... 11
1-2.7 Multi-I/O Functions .................................................................... 11
1-2.8 Expansion Slots ............................................................................ 11
1-2.9 AC’97 Audio Codec on board .................................................... 12
1-2.10 LAN on board (KT400-RL only) ............................................ 12
1-2.11 Hardware Monitor on board ................................................... 12
1-2.12 Smart Card Reader Support ................................................... 12
1-2.13 Serial ATA RAI Controller Integrated ............................... 12
1-2.14 Form Factor................................................................................ 12
1-3 Mainboard Specification Table ........................................... 13
1-4 Chipset System Block iagram........................................... 14
Chapter 2 Hardware Setup ..................................... 16
2-1 CPU Identification and Installation ................................... 17
2-1.1 CPU Identification Legends....................................................... 17
2-1.2 CPU Installation with Socket 462 ............................................. 18
2-2 Memory Installation ............................................................. 19
2-2.1 To Install R RAM Module................................................. 19
2-2.2 To Remove a IMM .................................................................... 19
2-2.3 Warning Indicator LE 1: IMM Slots Powered On ........... 20

5
Contents
2-3 AGP Slot Installation ............................................................ 21
2-4 I E Connector Installation ................................................. 22
2-5 Serial ATA Connector Installation...................................... 23
2-6 Floppy rive Connector ( F C ) Installation................... 24
2-7 ATX Power Supply Installation .......................................... 25
2-8 Jumper Settings ..................................................................... 26
2-8.1 JCLK1: CPU Clock/Overclock Select...................................... 27
2-8.2 JBAT1: Clear CMOS .................................................................. 28
2-8.3 Jp1: Anti-burn Shield (ASBII) .................................................. 29
2-8.4 Jp3: PS2 KB/Mouse Wake-up ................................................... 30
2-8.5 Jp4: USB KB/Mouse Wake-up .................................................. 30
2-9 Other Connectors Configuration........................................ 31
2-9.1 On-board FAN Connectors ........................................................ 31
2-9.2 USB Ports and USB Pin-headers .............................................. 32
2-9.3 Chassis Panel Connectors .......................................................... 33
2-9.4 PS/2 Mouse And PS/2 Keyboard ............................................... 33
2-9.5 C -ROM Audio Connectors (C -In1) .................................... 34
2-9.6 Smart Card Reader Connector: SCR1 .................................... 34
2-9.7 Connector WOL1: Wake On LAN............................................ 35
2-9.8 RJ45: LAN Connector ( KT400-RL only) ............................... 35
2-9.9 Complex Pin-header.................................................................... 36
2-9.10 Thermal Connectors ................................................................. 38
2-10 IRQ escription................................................................... 39
Chapter 3 Software Setup ....................................... 40
3-1 Open Up Support C : .......................................................... 41
3-2 Proceed to VIA 4-IN-1 rivers Installation ...................... 42
3-3 AC’97 Audio river Installation......................................... 44
3-3.1 AC’97 river Installation........................................................... 44
3-3.2 6-channel Verification ................................................................. 45

6
KT400-R / KT400-RL
3-4 Install USB 2.0 river for Win98 / Me / 2000 / XP.......... 48
3-5 Install Hardware Monitor Utility ....................................... 50
3-5.1 Installation ................................................................................... 50
3-5.2 Verification .................................................................................. 51
3-6 Install VIA LAN rivers (for KT400-RL only)............... 52
3-6-1. VIA6183 LAN driver on Windows 9X.................................... 52
3-6-2. VIA6183 LAN driver on Windows NT4.0 .............................. 54
3-6-3. VIA6183 LAN driver on Win ME / 2000 / XP....................... 55
3-7 Install RAI Controller P C20376 rivers ..................... 56
Chapter 4 AMI BIOS Setup.................................... 58
4-1 About BIOS Setup ................................................................. 59
4-2 To Run BIOS Setup ............................................................... 59
4-3 About CMOS .......................................................................... 59
4-4 The POST ( Power On Self Test ) ....................................... 59
4-5 To Update BIOS ..................................................................... 60
4-6 BIOS SETUP --- CMOS Setup Utility................................ 62
4-6.1 CMOS Setup Utility .................................................................... 62
4-6.2 Standard CMOS Setup ............................................................... 63
4-6.3 Advanced BIOS Features ........................................................... 66
4-6.4 Advanced Chipset Features ....................................................... 69
4-6.5 Power Management Features .................................................... 72
4-6.6 PNP / PCI Configurations .......................................................... 75
4-6.7 Integrated Peripherals................................................................ 77
4-6.8 Smart oc Anti-Burn Shield....................................................... 80
4-6.9 Frequency/Voltage Control ....................................................... 82
4-6.10 System Information................................................................... 84
4-6.11 Set Supervisor Password .......................................................... 85
4-6.12 Load Optimized efaults ........................................................ 87
4-6.13 Save & Exit Setup...................................................................... 87
4-6.14 Exit Without Saving .................................................................. 87

7
Contents
Mainboard
Support CD
Bundled Bonus Pack CD
Bundled Bonus Pack Manual
Thermal Cable (Optional)
ATA66/100/133 IDE Cable
FDD Cable
User Manual
RS232 Cable (Optional)
2 x Serial ATA Cable
Promise SATA RAID Driver Diskette
ITEM CHECKUP
Chapter 5 RAI Controller ................................... 88
5-0 Before Creating isk Array: ............................................... 89
5-1 Creating Your isk Array .................................................... 90
5-1.1 Creating An Array For Performance/Security....................... 90
5-1.2 Creating Security Array With Existing ata rive .............. 92
5-2 Installing rivers................................................................... 94
5-2.1 For Windows 2000/XP ................................................................ 94
5-2.2 Windows 95/98 ............................................................................. 96
5-2.3 OS/Windows 3.1x ...................................................................... 99
5-2.4 Windows NT4.0 ..........................................................................100
APPEN ICES........................................................ 103
Appendix-1 Identify Mainboard Model Number ................. 104
Appendix-2 Technical Terms .................................................... 105

8
KT400-R / KT400-RL
Topics incl ded in this chapter are:
1-1 Mainboard Layo t
1-2 Mainboard Specifications**
1-3 Mainboard Specification Table
1-4 Chipset System Block Diagram
Introd ction
Chapter 1 Specification
This series of mainboards features an integration of the powerful
AMD processors Athlon/Athlon XP/Duron and the North Bridge VIA
Apollo KT400 plus South Bridge VT8235, with which the whole system
performance supports 333/266/200 MHz system bus.
VIA Apollo KT400 plus VT8235 supports on-board AMD processors
to implement the 333/266/200MHz Front Side Bus, the AGP 8X/4X
interface, the LPC Super I/O, the DDR *400/333 MHz SDRAM, the 6-
channel AC’97 Audio interface, the USB 2.0 interface and ATA 133/100/
66 data transfer rate. This chapter is to introduce to users every ad-
vanced function of this high performance integration.
** If any difference is fo nd between this man al and the Main-
board yo are sing, please look p the ERRATA/UPDATE Slip
enclosed inside for the correction or pdated information, or
else contact the Mainboard Dealer or visit o r Web Site for the
latest man al pdate.

9
Chapter 1 Specification
PCI1
PCI2
PCI3
PCI4
PCI5
VIA
KT400
DIMM1
IDE2 IDE1
Li
Battery
Fan4
1
1
Fan3
Fan5
1
VIA
VT8235
Flash BI S
IT8705
AC'97
Codec
W L1
1
AGP 4X/8X
Clock
Generator
SPK RST PLED Keylock SLED
HDD/LED IR PWR SMI
++
--
+-
1
USB2
1
10
RT2
PCI6
Audio1
14
SCR1 14
1
USB1
1
10
Fan1
FDC
1
DIMM2
LED1
ATX Main Power
1
JBAT1
1
USB1
PS/2 K/B
Mouse
(on top)
(underside)
USB0
(middle)
(underside)
RJ45
(on top)
VT
6103
SOCKET 462
RT1
DIMM3
1
1
CD-In1
DDR 333/266MHz
3
4
LPC I/
LPT1
C M2 C M1
Line ut
Game/MIDI Port
Line In
Mic
RTL
ALC650
1
Fan2
7
JCLK1
1
Jp1
1
Jp4
1
Jp3
IDE3
PDC
20376
SATA2
SATA1
(DDR 400MHz conditionally supported)
5
9
1-1 KT400-R/KT400-RL Mainboard Layo t**
RJ45
LAN Controller
for KT400-RL only
}
Optional 6-channel A dio-o t Connector

10
KT400-R / KT400-RL
1-2 Mainboard Specifications
1-2.1 CPU Socket
CPU Socket 462 (Socket A) on board, supporting AMD Athlon, Athlon
XP and Duron processors and implementing 333/266/200MHz system
bus
1-2.2 System Chipsets
• North Bridge VIA KT400 for managing and supporting 333/266/
200MHz system Bus, AGP 8X/4X interface and DDR 333/266MHz
Memory Interface *with an enhanced support of DDR 400MHz
Memory Module which should have passed Soltek DDR 400 Memory
Module Validation.
• South Bridge VIA VT8235 working with North Bridge KT400 supporting
the V-Link, LPC Super I/O, PCI interface, ATA133 interface, LAN
interface, USB V2.0 interface, as well as AC’97 Audio 6-channel
interface.
1-2.3 Memory
3 DDR DIMM 184-pin slots on board :
• Supporting unregistered, non-ECC *DDR 400/333/266/200 DRAM up
to 3 GBs (DDR 400 Module supported conditionally)
• Supporting installation of mixed volumes yet same type of DDR DRAM
modules
*Soltek Computer Inc. typically runs a DDR 400 Memory Module
Validation Program for Chipset VIA KT400/P4X400A. Detailed
information is available in Soltek Web Site: www.soltek.com.tw
1-2.4 BIOS
• Supporting Plug & Play V1.0
• Flash Memory for easy upgrade
• Supporting BIOS Writing Protection and Year 2000 compliant
• Supporting BIOS Setup (See Chapter 4 BIOS Setup)
1-2.5 Accelerated Graphics Port (AGP) Interface
AGP Controller embedded on board, supporting:
• 1.5V(8X/4X) power mode only, 1 AGP Slot supported
• 8X 66MHz AD and SBA signaling; AGP pipelined split-transaction
longburst transfers up to 2GB/sec.
• AGP 8X/4X supported, AGP V3.0 compliant

11
Chapter 1 Specification
1-2.7 M lti-I/O F nctions
• PCI EIDE Controller, supporting:
-- 2 ATA 133 / 100 / 66 IDE connectors supporting up to 4 IDE devices
• Dedicated IR Functions:
-- 1x5 IR connector dedicated to IR function with Infrared-IrDA (HPSIR)
and ASK (Amplitude Shift Keyed) IR
• Multi-mode parallel data transfer:
-- Standard mode, high speed mode ECP and enhanced mode EPP
• Floppy Drive Connector:
-- 1 FDD connector supporting 2 floppy drives with drive swap support
• Universal Serial Bus Transfer Mode:
-- USB V2.0 compliant, 480 Mb/s USB Bus, supporting Win 98 and later
operating systems; USB drivers provided in Support CD for installation
-- 2 built-in USB connectors and 2 more USB pin-headers which require 2
optional USB cables to provide 4 more USB ports
• PS/2 Keyboard and PS/2 Mouse
• UARTs (Universal Asynchronous Receiver / Transmitter):
-- 2 complete serial ports (COM1 & COM2) on board
1-2.8 Expansion Slots
• 6 PCI Bus Master slots
• 1 AGP 8X/4X slot
• 3 DDR DIMM slots
1-2.6 Advanced System Power Management
Advanced Configuration and Power Interface incorporated in BIOS for
reducing power consumption :
• ACPI 1.0 compliant (Advanced Configuration and Power Interface)
• APM V1.2 compliant (Legacy Power Management)
• ACPI Suspend function supported
• PS/2 Keyboard & Mouse Power On
• Supporting Ring Signal Power Up Control for Wake-on-LAN (with
Connector WOL1)
• Real Time Clock (RTC) with date alarm, month alarm, and century
field

12
KT400-R / KT400-RL
1-2.9 AC’97 A dio Codec on board
AC’97 Audio Codec 2.2 compliant on board
• Supporting up to 6 channels of PCM audio output
• 6 channel audio consists of Front Left, Front Right, Back Left, Back
Right, Center and Sub-woofer for complete surrround sound effect
• AC’97 Audio Codec Driver enclosed in Support CD for user’s installa-
tion
1-2.11 Hardware Monitor on board
• Hardware Monitor integrated in LPC I/O IT8705F, provides monitor-
ing and alarm for flexible desktop management of hardware voltage,
temperatures and fan speeds.
• Utility Software SmartGuardian for displaying monitoring status is
enclosed in Support CD for user’s installation.
1-2.14 Form Factor
• ATX form factor, ATX power supply
• Mainboard size: 305mm x 225mm
1-2.12 Smart Card Reader S pport
• Connector SCR 1” on board to support Smart Card Reader, compli-
ant with Personal Computer Smart Card (PC/SC) working group stan-
dard and smart card (ISO 7816) protocols
1-2.10 LAN on board (KT400-RL only)
Fast Ethernet Controller integrated in VT8235 and PHY VIA VT6103:
• Supporting 10/100Mb Fast Ethernet Base T LAN
• Supporting Wake On LAN through on-board WOL1 connector
• LAN Driver enclosed in Support CD for user’s installation
1-2.13 Serial ATA RAID Controller Integrated
• Promise PDC20376 integrated on board
• Supporting 2 serial RAID connectors for 2 serial RAID hard disks
with up to 150MB/s transfer rate
• Supporting an additional RAID IDE connector for one more RAID IDE
hard Disk with up to 133MB/s transfer rate

13
Chapter 1 Specification
1-3 Mainboard Specification Table
CPU
North Bridge
South Bridge
BIOS
Memory
I/O Chip
AGP interface
Audio
IDE Interface
Serial ATA
PCI Slots
I/O Connectors
Other common
features
Optional
Feature
LAN Controller
on board
Socket 462 for AMD Athlon, Athlon XP, Duron CPU
VIA KT400, supporting 333/266/200 MHz FSB
VT8235
AMI BIOS
Supporting DDR *400/333/266 DRAM, up to 3GB
in 3 DDR DIMM slots
ITE IT8705F with Hardware Monitor
AGP 8X/4X mode only
AC’97 Audio 2.2 compliant, 6 channel audio
2 ATA 133/100/66 IDE and 1 SATA RAID IDE
2 SATA connectors supported by RAID Controller
6 PCI Master slots on board
6 USB V2.0, 1 FDD port, 2 COM ports, 1 LPT,
1 IrDA, 1 PS/2 K/B, 1 PS/2 Mouse, 1 SCR slot
BIOS Writing Protection;
Keyboard/ Mouse Power On;
ATX Power Supply;
ATX form factor
KT400-R/KT400-RL Specifications and Feat res
KT400-R KT400-RL
No Yes

14
KT400-R / KT400-RL
1-4 Chipset System Block Diagram
Socket 462 + VIA KT400 + VIA VT8235 Diagram
Socket 462
System B s 333/266/200MHz
for AMD CPUs
System
Memory
DDR memory
Interface
DDR 266/
333 DRAM
AGP Slot AGP 8X/4X
V-Link
PCI B s
AC’97
ATA 133/100/66
4 IDE
Devices
USB B s V2.0
USB
Ports
6 PCI Slots
Audio Codec
(6-channel)
IR
FDD
Serial Ports
Printer Port
Game/MIDI
H/Monitor
BIOS
LPC I/O
IT8705
VIA KT400
North Bridge
VT8235
So th
Bridge
Mouse
Keyboard
PHY RJ45
(Optional)
PCI B s
6 PCI Slots
PDC20376
2 SATA ports+ 1 IDE port

16
KT400-R / KT400-RL
Chapter 2 Hardware Setup
1. We recommend to install your CPU before any other components.
For detailed installation instructions of processor, you can also refer
to the pamphlet enclosed in your CPU package.
2. Installing a cooling fan with a good heatsink is a must for proper heat
dissipation for your CPU. Get ready an appropriate fan with heatsink
for proper installation. Improper fan and installation will damage your
CPU.
3. In case CPU Vcore, CPU clock or Frequency Ratio is adjustable on
board, please follow the instructions described in the User Manual
for proper setup. Incorrect setting will cause damage to your CPU.
The following topics are incl ded in this chapter:
To Get Things Ready for Hardware Set p !
2-1 CPU Identification and Installation
2-2 Memory Installation
2-3 AGP Slot Installation
2-4 IDE Connector Installation
2-5 Floppy Drive Connector ( FDC ) Installation
2-6 ATX Power S pply Installation
2-7 J mper Settings
2-8 Other Connectors Config ration
2-9 IRQ Description

17
Chapter 2 Hardware Setup
2-1 CPU Identification and Installation
2-1.1 CPU Identification Legends
AMD
XXXXXXXXXXX¤
XXXXXXXXXXXX¤
XXXXXXX¤
XXXXXXXXX¤
XXXXXXXXXXX¤
XXXX
AMD XXXX
A 0850 A P
A 0850 A P
T 3 B
T 3 B
1234567
Family / Architecture:
A=AM Athlon Processor
=AM uron Processor
Speed: 0850=850MHz, 0900=900MHz,
1000=1000MHz, 2000=1667MHz,
2200=1800MHz
Package Type: M=Card Module, A=PGA
Voltage: S=1.5V, U=1.6V, P=1.7V, M=1.75V, N=1.8V
Case Temperature: Q=60˚C, X=65˚C, R=70˚C, Y=75˚C,
T=90˚C, S=95˚C
Size of L2 Cache: 1=64Kbyte, 2=128Kbyte, 3=256Kbyte
Max FSB: A=B=200MHz, C=or others=266MHz.
Note: Get the Host CPU Clock by deviding FSB by 2.
(1)
(2)
(3)
(4)
(5)
(6)
(7)

18
KT400-R / KT400-RL
AMD
SOCKET 462
SOCKET 462
2-1.2 CPU Installation with Socket 462
This series is built with CPU Socket 462 supporting the AMD CPUs
Athlon, Athlon XP and Duron:
• Follow the steps described in this section to install CPU into the on-
board Socket 462.
• After installation of CPU, you must also install a proper cooling fan
on top of the CPU and connect the Fan cable to the CPU fan
connector.
1. First pull sideways the lever of
Socket 462, and then turn it up
900 so as to raise the upper layer
of the socket from the lower
platform.
3. Make sure that all CPU pins have
completely entered the socket
and then lower down the lever
to lock up CPU to socket.
2. Configure Pin 1 of CPU to Pin 1
of the Socket, just as the way
shown in the diagram on the
right. Adjust the position of CPU
until you can feel all CPU pins
get into the pin holes of the
socket.
Pin 1
Pin 1
SOCKET 462
AMD

19
Chapter 2 Hardware Setup
2-2 Memory Installation
How to tackle the memory Modules:
• Make sure to unplug your power supply before adding or removing
memory module. Failure to do so may cause severe damage to both
your mainboard and the memory module.
• Pay attention to the orientation of the DIMM slots. Forcing a DIMM
into a slot improperly will damage the memory module and slot itself.
• Make sure you have the right type of memory module for your
mainboard.
184-Pin DIMM Notch Key Definitions (2.5V)
DRAM Key Position Voltage Key Position
2.5V
Module Latc
• This series supports up to 3GB unbuffered *DDR 400/333/266 SDRAM,
with 3 DDR DIMM slots on board. Do not insert other type of mod-
ules into these slots. Memory support is upgradable to DDR 400 with-
out guarantee of success in BIOS Setup.
*DDR 400 Module is supported on condition that the module has passed
Soltek DDR 400 Memory Module Validation Test. Soltek Computer
Inc. typically runs a DDR 400 Memory Module Validation Program
for Chipset VIA KT400/P4X400A. Detailed information is available in
Soltek Web Site: WWW.soltek.com.tw
• DDR DIMM slot has 184-pins and one notch. Insert a DDR SDRAM
vertically into the 184-pin slot with the notch-to-rib matching.
2-2.1 To Install DDR DRAM Mod le
DDR Notch
DDR Rib
2-2.2 To Remove a DIMM
Press down the holding latches on both sides of slot to release the
module from the DIMM slot.

20
KT400-R / KT400-RL
PCI1
PCI2
PCI3
PCI4
PCI5
VIA
KT400
DIMM1
IDE2 IDE1
Li
Battery
Fan4
1
1
Fan3
Fan5
1
VIA
VT8235
Flash BI S
IT8705
AC'97
Codec
W L1
1
AGP 4X/8X
Clock
Generator
SPK RST PLED Keylock SLED
HDD/LED IR PWR SMI
++
--
+-
1
USB2
1
10
RT2
PCI6
Audio1
14
SCR1
14
1
USB1
1
10
Fan1
FDC
1
DIMM2
LED1
ATX Main Power
1
JBAT1
1
USB1
PS/2 K/B
Mouse
(on top)
(underside)
USB0
(middle)
(underside)
RJ45
(on top)
VT
6103
SOCKET 462
RT1
DIMM3
1
1
CD-In1
DDR 333/266MHz
3
4
LPC I/
LPT1
C M2 C M1
Line ut
Game/MIDI Port
Line In
Mic
RTL
ALC650
1
Fan2
7
JCLK1
1
Jp1
1
Jp4
1
Jp3
IDE3
PDC
20376
SATA2
SATA1
(DDR 400MHz conditionally supported)
5
9
DDR DIMM Slots
(184-pin)
2-2.3 Warning Indicator LED1: DIMM Slots Powered On
An indicator LED1 is designed on board. Whenever system is started
or is in STR status (Suspend to RAM), all the DIMM slots on board will
also get powered on with the set voltage, resulting in LED1 lighting up.
This indicator LED1 is to warn users that, whenever DIMM slot is pow-
ered on, no memory module should be removed from or added into it.
LED1
DIMM Slots Powered
On Indicator

21
Chapter 2 Hardware Setup
2-3 AGP Slot Installation
The AGP slot on board supports 1.5V AGP 8X/4X card only. A Rib is
specifically added to the 8X/4X slot so as to match the AGP 8X/4X card.
To insert a 3.3V AGP 2X card into the AGP 4X slot will damage the
system chip and burn the 1.5V circuitry.
An AGP 8X card will support a data transfer rate up to 2GB/sec., while
an AGP 4X card will provide 1GB/sec transfer rate.
PCI1
PCI2
PCI3
PCI4
PCI5
VIA
KT400
DIMM1
IDE2 IDE1
Li
Battery
Fan4
1
1
Fan3
Fan5
1
VIA
VT8235
Flash BI S
IT8705
AC'97
Codec
W L1
1
AGP 4X/8X
Clock
Generator
SPK RST PLED Keylock SLED
HDD/LED IR PWR SMI
++
--
+-
1
USB2
1
10
RT2
PCI6
Audio1
14
SCR1
14
1
USB1
1
10
Fan1
FDC
1
DIMM2
LED1
ATX Main Power
1
JBAT1
1
USB1
PS/2 K/B
Mouse
(on top)
(underside)
USB0
(middle)
(underside)
RJ45
(on top)
VT
6103
SOCKET 462
RT1
DIMM3
1
1
CD-In1
DDR 333/266MHz
3
4
LPC I/
LPT1
C M2 C M1
Line ut
Game/MIDI Port
Line In
Mic
RTL
ALC650
1
Fan2
7
JCLK1
1
Jp1
1
Jp4
1
Jp3
IDE3
PDC
20376
SATA2
SATA1
(DDR 400MHz conditionally supported)
5
9
AGP Accelerator
notch
AGP 8X/4X Slot

22
KT400-R / KT400-RL
PCI1
PCI2
PCI3
PCI4
PCI5
VIA
KT400
DIMM1
IDE2 IDE1
Li
Battery
Fan4
1
1
Fan3
Fan5
1
VIA
VT8235
Flash BI S
IT8705
AC'97
Codec
W L1
1
AGP 4X/8X
Clock
Generator
SPK RST PLED Keylock SLED
HDD/LED IR PWR SMI
++
--
+-
1
USB2
1
10
RT2
PCI6
Audio1 14
SCR1
14
1
USB1
1
10
Fan1
FDC
1
DIMM2
LED1
ATX Main Power
1
JBAT1
1
USB1
PS/2 K/B
Mouse
(on top)
(underside)
USB0
(middle)
(underside)
RJ45
(on top)
VT
6103
SOCKET 462
RT1
DIMM3
1
1
CD-In1
DDR 333/266MHz
3
4
LPC I/
LPT1
C M2 C M1
Line ut
Game/MIDI Port
Line In
Mic
RTL
ALC650
1
Fan2
7
JCLK1
1
Jp1
1
Jp4
1
Jp3
IDE3
PDC
20376
SATA2
SATA1
(DDR 400MHz conditionally supported)
5
9
2-4 IDE Connector Installation
Gray Connector
Blue Connector
Black Connector
Red Line
IDE Flat Cable (To Mainboard)
(To Slave Device)
(To Master Device)
1. To install IDE Connector, you may connect the blue connector of IDE
cable to the primary (IDE1) or secondary (IDE2) connector on board,
and then connect the gray connector to your slave device and the
black connector to your master device. If you install two hard disks,
you must configure the second drive to Slave mode by setting its
jumpers correctly. Please refer to your hard disk documentation for
the jumper settings.
2. An additional parallel ATA connector IDE3 is supported by the optional
Serial ATA RAID Controller PDC20376. IDE3 is enabled as a RAID
IDE connector only if the driver for the RAID Controller is installed
on board (See Chapter 5 Disk Array Installation).
ATA IDE connecrtors:
Orient the red line on the IDE
Flat Cable to Pin1.
Pin 1 (to Red Line)
RAID IDE Connector:
Enabled by RAID Driver
IDE1
IDE2
IDE3

23
Chapter 2 Hardware Setup
PCI1
PCI2
PCI3
PCI4
PCI5
VIA
KT400
DIMM1
IDE2 IDE1
Li
Battery
Fan4
1
1
Fan3
Fan5
1
VIA
VT8235
Flash BI S
IT8705
AC'97
Codec
W L1
1
AGP 4X/8X
Clock
Generator
SPK RST PLED Keylock SLED
HDD/LED IR PWR SMI
++
--
+-
1
USB2
1
10
RT2
PCI6
Audio1 14
SCR1
14
1
USB1
1
10
Fan1
FDC
1
DIMM2
LED1
ATX Main Power
1
JBAT1
1
USB1
PS/2 K/B
Mouse
(on top)
(underside)
USB0
(middle)
(underside)
RJ45
(on top)
VT
6103
SOCKET 462
RT1
DIMM3
1
1
CD-In1
DDR 333/266MHz
3
4
LPC I/
LPT1
C M2 C M1
Line ut
Game/MIDI Port
Line In
Mic
RTL
ALC650
1
Fan2
7
JCLK1
1
Jp1
1
Jp4
1
Jp3
IDE3
PDC
20376
SATA2
SATA1
(DDR 400MHz conditionally supported)
5
9
2-5 Serial ATA Connector Installation
2 Serial ATA connectors are built on board, supported by the SATA RAID
Controller PDC20376. Before we install S ATA RAID disk drive to the
Serial ATA Connector, we must first enable the controller PDC20376
by BIOS Setup (see Integrated Peripheral” of BIOS Setup) and then
install the RAID Controller Driver (see Chapter 5 Disk Array Installation).
Serial ATA Connector SATA1 and SATA2
Serial ATA Hard Disk
Serial ATA Cable

24
KT400-R / KT400-RL
To install FDC, you should connect the end of FDC cable with single
connector to the board, and connect the other end with two connectors
to the floppy drives.
2-6 Floppy Drive Connector ( FDC ) Installation
To 1st Floppy Drive
To mainboard
To 2nd Floppy Drive
Red line
Floppy Drive Connector:
Orient the red line of the
Floppy Flat Cable to Pin1.
Pin 1 (to Red Line)
PCI1
PCI2
PCI3
PCI4
PCI5
VIA
KT400
DIMM1
IDE2 IDE1
Li
Battery
Fan4
1
1
Fan3
Fan5
1
VIA
VT8235
Flash BI S
IT8705
AC'97
Codec
W L1
1
AGP 4X/8X
Clock
Generator
SPK RST PLEDKeylock SLED
HDD/LED IR PWR SMI
++
--
+-
1
USB2
1
10
RT2
PCI6
Audio1 14
SCR1
14
1
USB1
1
10
Fan1
FDC
1
DIMM2
LED1
ATX Main Power
1
JBAT1
1
USB1
PS/2 K/B
Mouse
(on top)
(underside)
USB0
(middle)
(underside)
RJ45
(on top)
VT
6103
SOCKET 462
RT1
DIMM3
1
1
CD-In1
DDR 333/266MHz
3
4
LPC I/
LPT1
C M2 C M1
Line ut
Game/MIDI Port
Line In
Mic
RTL
ALC650
1
Fan2
7
JCLK1
1
Jp1
1
Jp4
1
Jp3
IDE3
PDC
20376
SATA2
SATA1
(DDR 400MHz conditionally supported)
5
9
FDD Cable