SOMFY Maestria 50 RTS User manual

0
Maestria 50 RTS
Manual Setting with Manual Locks at the Bottom
Limit
* The motor will move continuously if the Up or Down buttons are held for more than a few
seconds. Use the MY button to stop.
** The manual lock function is deactivated by default. These steps activate the manual
lock function. To deactivate, repeat step 6.
Obstacle detection works when the correct weight of the load bar is used in the
application. Check with your product manufacturer if the obstacle detection does not
work.
1. Power On the Motor
2. Check the Motor’s Rotation Direction
3. Deactivate Obstacle Detection

0
4. Set Limits
5. Programming the RTS Control to the Motor

0
6. Program Manual Lock Function

0
Flowchart for Manual Setting with Manual Locks at the Bottom Limit