Specialized SPEEDZONE SPORT DOUBLE WIRELESS User manual

SPEEDZONE
SPORT DOUBLE
WIRELESS

1
Printable manuals available at:
www.specialized.com
(click on: support tab)

2 3
Components of the Sport Double Wireless 3
Installing Computer Mounts 4
Installing speed & cadence transmitter 5
Sport Double Wireless user interface 6
Easy set-up and resetting 7
Using your Sport Double Wireless (keyow) 14
Linking 16
Re-entering pairing sequence 18
Clearing data 20
Re-setting the clock 22
Re-setting the odometer and mi/km 24
Re-setting wheel/tire size 26
Manually setting wheel/tire size 27
Replacing the battery 30
Components of the Sport Double Wireless
1. Speedzone cyclo-
computer head unit
2. Cadence magnet
3. Handlebar bracket
4. Base mount
5. Steerer tube bracket
6. Speed transmitter
7. Cadence sensor
8. Spoke magnet
9. Zip ties
10. Digital heart rate strap
(sold seperately)
Specications and ranges 31
Troubleshooting 32
Warranty information 33
Table of contents

4 5
• Install the steerer tube bracket base assembly on the steerer tube.
Re-install the steerer tube top cap.
• Place handlebar bracket on handlebar, attach the base mount to the handlebar
bracket with the included bolt.
• Adjust base to desired angle with bolt adjustment.
Installing Computer Mounts
steerer tube bracket handlebar bracket
Adjust spoke magnet so path of rotation passes along the groove area inside
the sensor. IMPORTANT: Placing magnet outside the groove path may cause
improper reading.
• Attach the cadence magnet with self adhesive pad to the crank arm, and
position the sensor’s raised line within the magnet’s
rotation path.
Installing speed & cadence transmitter
!
1-5mm
1/16 - 1/4 in.
!

6SETUP 7
Speedzone Sport Double Wireless interface
Hold PAIR BUTTON
for 2 seconds to initi-
ate easy setup;
this is only required
to wake unit from
shipping mode (rst
purchased).
Wake from shipping mode Reset and all clear
Press RESET BUTTON
to enter easy set up.
Blank screen
indicates
shipping mode
Easy set-up and resetting
Average speed comperator
Digital speed display
Secondary function display
Secondary function indicators
Secondary function indicators
Set-up conrmation arrow
Set button
*Illuminated when signal is paired
Miles (English)/KM (metric)
Speed (10ths)
Cadence signal
Heartrate signal
Set-up selection arrow
Mode button
Pair button
2 sec OR PRESS

8SETUP SETUP 9
From initial start-up:
Clock setting
select 12/24 hr “set” preference select hour
...continued
select minute

10 SETUP SETUP 11
Metric (km) or English (mi) & odometer Wheel and tire size selection
(To manually set wheel size see page 27)
select KM/miles “set” preference select rst digit select last digit “set” wheel size
select wheel
size from
size presets
x4

12 SETUP SETUP 13
Head unit is searching for speed, cadence, and heart rate transmission signal from
ANT+ digital transmitters. (To re-enter pairing sequence see page 18)
Pairing digital ANT+™ wireless device ...continued
begin pairing
speed paired cadence paired *HR paired
30s timeout or
all sensors found
clock mode
*Heart rate monitor sold seperately

14 15
Using your Speedzone Sport Double Wireless
(keyow)
PRESS to shufe through modes
clock mode
*ave. hrt mode
odo mode
*max. hrt mode
trip distance mode
*current hr mode
actual time moving mode
ave. cadence mode
max. speed mode
max. cadence mode
ave. speed mode
current cadence mode
...continued
*If paired with heart rate monitor (Heart rate monitor sold seperately)

16 17
Linking
• When waking from SLEEP MODE the computer will automtically search for
previously paired sensors.
• From ANY MODE press PAIR BUTTON to search for previously
paired sensors.
...continued
press PAIR
searching speed found cadence found found sensors will
stop ashing
and remain solid
*HR found
*Heart rate monitor sold seperately