Specialized SpeedZone Elite User manual

OWNERS MANUAL
MODE D’EMPLOI
MANUAL DEL USUARIO
BENUTZERHANDBUCH
GEBRUIKERSHANDLEIDING
MANUALE UTENTE
MANUAL DO UTILIZADOR
UŽIVATELSKÁ PŘÍRUČKA
エ取扱説明書

01
www.specialized.com
(click on: support tab)
Printable manuals are available at:
02
Table of contents
3. Components of the Speedzone Elite
5. Installing bracket and speed sensor
8. Replacing the battery
9. Speedzone Elite user interface
10. Easy set-up & resetting
14. Using your Speedzone Elite (keyflow)
16. Re-setting the clock/language
17. Clearing TRIP/ATM (Auto Timer)
18. Manually setting the wheel/tire size
22. Resetting the altitude
23. Using the timer
27. Resetting bicycle #1 - #2 selection
28. Resetting Km/Mi + Odometer
29. Sleep and Standby modes
30. Troubleshooting
19. Resetting Km or Mi and Odometer
32. Specifications and ranges

02
Table of contents
3. Components of the Speedzone Elite
5. Installing bracket and speed sensor
8. Replacing the battery
9. Speedzone Elite user interface
10. Easy set-up & resetting
14. Using your Speedzone Elite (keyflow)
16. Re-setting the clock/language
17. Clearing TRIP/ATM (Auto Timer)
18. Manually setting the wheel/tire size
22. Resetting the altitude
23. Using the timer
27. Resetting bicycle #1 - #2 selection
28. Resetting Km/Mi + Odometer
29. Sleep and Standby modes
30. Troubleshooting
19. Resetting Km or Mi and Odometer
32. Specifications and ranges

03
Components of the Speedzone Elite
1
2
45
7
68
3

04
Components of the Cyclocomputer
Look at all the components your Speedzone Elite comes with!
1. Speedzone Pro cyclocomputer head unit
2. Speed sensor
3. Speed sensor rubber shim
4. Handlebar bracket - rubber shim
5. Base mount
6. Stem mount tube bracket
7. Spoke magenet
8. Zip Ties

05
Installing the steerer tube bracket
1. Remove the steerer tube top cap with appropriate hex key
2. Install the stem mount/bracket assembly on the
steerer tube, and re-assemble with appropriate spacers
if required for proper stack height.
3. Re-install the steerer tube top cap with appropriate hex key.
4. Adjust cassette base to desired angle with bolt adjustment.

06
Installing the handlebar bracket
1. Place handlebar bracket on handlebar
2. Use included zip-ties to affix the bracket to the handlebar
3. Attach the base mount to the handlebar bracket with the
included bolt, and tighten at desired angle.

07
Installing the speed sensor
1-3mm
1/32-1/8 in .
500-700mm
20-28 in.
• The sensor should be
mounted with cap of
battery door toward the
ground with distance
between sensor and
handlebar no more
than 24in (0.6m).
• Adjust magnet position
so magnet is aligned
with line on bottom of
edge of sensor and
1/32 – 1/8 in (1-3 mm)
of separation. DO
NOT over tighten the
magnet.

08
Replacing the battery
CR2032battery
Rotate battery cover quarter turn to remove battery.
23A battery

09
Speedzone Elite user interface
DigitalSpeedDisplay
Secondaryfunctiondisplay
Secondaryfunctionindicator
Averagespeedcomparator
Batterylowindicator
Secondbikeindicator
Speed(10ths)
Miles/KM/HRindicator
Setkey Modekey
Start/Stopkey
Firstbikeindicator