SpectraLink 7480 User manual

1
Spectralink 7480
Handset
The Spectralink 7480 handset
User Guide is available for
download at:
www.spectralink.com.
Safety and Regulatory
Instructions
The CE marking
indicates compliance
with EEC Directives
94/9 EC and 1999/5/
EC. A full copy of the
Declaration of
Conformity can be
obtained from
Spectralink Europe
ApS, Langmarksvej
34, 8700 Horsens,
Denmark.
The WEEE Marking on
this equipment
indicates that the
product must not be
disposed of with
unsorted waste, but
must be collected
seperately.
K002
14205900.fm Page 1 Friday, November 15, 2013 11:24 AM

2
Product: Spectralink 7480
Type: 023480XX
(ATEX/IECEX)->(1G8)
Telecom requirements
The Spectralink 7480 handset
complies with the essential
requirements of the R&TTE
Directive 99/5/EC if used for
intended purpose.
Applied Standards
TBR 22 - Generic Access Profile
(GAP), 1997
TBR 10 - General Terminal
Attachment requirement, 1999
Application, Intended purpose
The Spectralink 7480 handset is a
DECT based handset, designed to
be used in connection with KIRK
wireless communication solutions
in potentially explosive
environments. The DECT
transmitter frequencies of the
apparatus are harmonized for
these services in the European
Community.
14205900.fm Page 2 Friday, November 15, 2013 11:24 AM

3
Meaning of Conformity
For the application of the
equipment in areas which have a
potentially explosive atmosphere
the manufacturer declares on his
own responsibility that under the
claimed type of protection the
equipment is in conformance with
the relevant Euro-pean
harmonized standards. The
equip-ment may only be used
under conditions that are
mentioned in the ATEX and IECEx
Type Examination Certificate.
Quality Assurance
The product is designed and
produced by a manufacturing
organization, which is certified on
ISO 9001:2008 and ISO
14001:1996 standards. These
products are in conformance with
the full quality assurance
procedures as mentioned in annex
III, IV and VII of the ATEX Directive
94/9/EC and annex V of the
R&TTE Directive 99/5/EC and
bears the marking 0891. The
number 0891 is the identification
number of:
TRaC Global Ltd., Unit 1, Pendle
Place, Skelmersdale, WN8 9PN,
United Kingdom.
14205900.fm Page 3 Friday, November 15, 2013 11:24 AM

4
Compliance with the ATEX
Directive is assessed and certified
by:
TRaC Global Ltd., Unit 1, Pendle
Place, Skelmersdale, WN8 9PN,
United Kingdom.
Compliance with the requirements
of ISO 9001:2008 and ISO
14001:1996 is assessed and
certified by:
Bureau Veritas, Oldenborggade
1b, 7000 Fredericia, Denmark.
Special Conditions for Safe
Use
The Spectralink 7480 handset is
developed for use in potentially
explosive working environments,
as defined by local fire protection
authorities.
For safe use, please remind the
following:
•Consult your system manager
for instructions before using
Spectralink 7480 handset
•When the handset is used in
hazardous area, it must be
used with leather pouch, part
number: 0231 9543.
14205900.fm Page 4 Friday, November 15, 2013 11:24 AM

5
•Do not open the Spectralink
7480 handset inside
hazardous area.
•The battery shall only be
charged in non-hazardous
area using dedicated charger,
part number: 8464 2496.
•Use only dedicated battery
pack, part number: 8474 3425.
•The AC power adaptor used in
connec-tion with the charger
must not be con-nected to a
higher voltage than 250V AC.
•If defects occur, remove the
Spectralink 7480 handset
immediately from the
hazardous area.
•Only suitably approved
headsets designed for use in
hazardous area shall be used
with the handset in hazardous
area.
•Only Spectralink may repair
and service the Spectralink
7480 handset.
•For traceability it is advisable
to keep a record of type and
serial numbers of the
handsets, as well as the name
of users of the handset.
14205900.fm Page 5 Friday, November 15, 2013 11:24 AM

Parameter Headset terminal
Uo 4.8V
Io 0.33A
Po 0.4W
Lo 80μH
Co 10μF
Um 9.56V
6
Handset Marking
•Spectralink: Manufacturer
name
•Spectralink 7480: Product
name
•K002: Model number
•IECEx TRC 12.0010X: Notified
Body and certification number
for IEXEx
•EX: Approved for hazardous
areas
•Ib: Intrinsic safety protection
principle
•IIC: Gas group IIC
•T3: Temperature group
•Gb: Equipment protection level
for gas
•IIIC: Dust group IIIC
14205900.fm Page 6 Friday, November 15, 2013 11:24 AM

7
•T140°C: Max surface
temperature in fault condition.
•Db: Equipment protection level
for dust
•ATEX marking
indicates
compliance with
the ATEX
Directive 94/9/EC
•TRAC12ATEX0024X: Notified
Body and certification number
for ATEX
•II 2 D: Equipment group II,
category 2, for dust
environment.
•II 2 G: Equipment group II,
category 2, for gas
environment.
•Ta: -10°C to +40°C: Ambient
temperature range
•Um = 9.56Vdc: Max charge
voltage
•CE 0891: CE marking and
identification number of
Notified Body
•IP54: Ingress Protection Level
14205900.fm Page 7 Friday, November 15, 2013 11:24 AM

8
Notices
Before installing this equipment,
users should ensure that it is
permissible to be connected to the
facilities of the local
telecommunications company.
The equipment must also be
installed using an acceptable
method of connection. The
customer should be aware that
compliance with the above
conditions may not prevent
degradation of service in some
situations.
Repairs to certified equipment
should be coordinated by a
14205900.fm Page 8 Friday, November 15, 2013 11:24 AM

9
representative designated by the
supplier. Any repairs or alterations
made by the user to this
equipment, or equipment
malfunctions, may give the
telecommunications company
cause to request the user to
disconnect the equipment.
Users should ensure for their own
protection that the electrical
ground connections of the power
utility, telephone lines and internal
metallic water pipe system, if
present, are connected together.
This precaution may be particularly
important in rural areas.
EMC Note
This equipment has been tested
and found to comply with the limits
for a class B digital device,
pursuant to local regulations.
These limits are designed to
provide reasonable protection
against harmful interference in a
residential installation. This
equipment generates, uses and
can radiate radio frequency energy
and, if not installed and used in
accordance with the instructions,
may cause harmful interference to
radio communications.
However, there is no guarantee
that interference will not occur in a
14205900.fm Page 9 Friday, November 15, 2013 11:24 AM

10
particular installation. If this
equipment does cause harmful
interference to radio or television
reception, which can be
determined by turning the
equipment off and on, the user is
encouragedto try to correct the
interference by one or more of the
following measures:
• Reorient or relocate the
receiving antenna.
• Increase the separation
between the equipment and
receiver.
• Connect the equipment into
an outlet on a circuit different
from that to which the
receiver is connected.
• Consult the dealer or an
experienced radio/TV
technician for help.
Power Outage
In the event of a power outage, your
wireless telephone will not operate.
The wireless telephone requires
electricity for operation. You should
have a telephone which does not
require electricity available for use
during power outages.
14205900.fm Page 10 Friday, November 15, 2013 11:24 AM

11
Note EMC
Cet appareil a été soumis à un
essai et jugé conforme aux normes
régissant les limites établies pour
un dispositif numérique de classe
B, conformément aux règlements
locaux. Ces limites visent à
assurer une protection raisonnable
contre des interférences pouvant
nuire à l’appareil utilisé dans un
secteur résidentiel. Cet équipment
génère et utilise des
radiofréquences, et peut en
émettre. S’il n’est pas installé et
utilisé selon les directives fournies,
il risque de perturber les
radiocommunications.
L’exploitation de cet appareil dans
un secteur particulier est toutefois
susceptible de produire des
interférences nuisibles. Si cet
équipement provoque des
interférences lors de la réception
des radiofréquences ou des
fréquences de télévision, ce qui
peut être vérifié en mettant
l’appareil hors tension, puis en le
remettant sous tension, l’utilisateur
doit prendre l’une des mesures
suivantes pour corriger la
situation:
• réorienter ou relocaliser
l’antenne de réception;
14205900.fm Page 11 Friday, November 15, 2013 11:24 AM

12
• augmenter la distance entre
l’appareil et l’antenne de
réception;
• brancher l’appareil à une
prise d’un circuit différent de
celui auquel l’antenne est
branchée; consulter le
détaillant ou un technicien en
radiotélévision d’expérience
pour obtnir de l’aide.
14205900.fm Page 12 Friday, November 15, 2013 11:24 AM

13
14205900.fm Page 13 Friday, November 15, 2013 11:24 AM

14
14205900.fm Page 14 Friday, November 15, 2013 11:24 AM

15
14205900.fm Page 15 Friday, November 15, 2013 11:24 AM

16
©2013 Spectralink. All rights
reserved. Specifications subject to
change without notice.
Spectralink Corporation
2560 55th Street
Boulder CO 80301
USA
Spectralink Europe ApS
Langmarksvej 34
DK-8700 Horsens
Tel. [phone]
Fax [phone]
www.spectralink.com
14205900 ED.8, A. Rasmussens Bogtrykkeri, Ringkøbing
14205900.fm Page 16 Friday, November 15, 2013 11:24 AM