SteelFlex CAC-700 User manual

OWNER'S MANUAL
CAC-700
THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF
EQUIPMENT. TO MINIMIZE RISK, YOU MUST FOLLOW THESE RULES:
1.Inspect equipment before each workout. Check that all nuts, bolts, screws and
pop pins are in place and fully tightened. Also, before use, check cylinders for leaking.
Replace all worn parts immediately. Never use machine if any parts are
damaged or missing. Fallure to follow these rules may result in serious injury.
2.Keep clear of the cylinder and all moving parts when the machine is in use.
3.Exercise with care. Perform your exercises at a smooth moderate pace; never
perform jerky or uncoordinated movements that may cause injury.
4.It is recommended that you should workout with a training partner.
5.Do not allow children or minors to play on or around this equipment.
6.If unsure of proper use of equipment, call your local distributor.
7.WARNING: Consult your physician before starting your exercise program. For your
own safety do not begin any exercise program without proper instruction.
The Surgeon General
has determined that lack
of physical activity is
detrimental to your health.TM
Trademark of United States Fitness Produots Council

ASSEMBLY INSTRUCTIONS
Page
CAC-700
HARDWARE ILLUSTRATION
1.1
(A1)ROUND INNER HEX SCREW M8X40L PARTIAL QTY.2
CAC700-032008
(A2)HEX BOLT M8X60L PARTIAL QTY.4
(A3)HEX BOLT M10X60L PARTIAL QTY.4
2
13456
(A4)BOLT CAP(9212-024) QTY.4
(A5)M10X25L SOCKER FLAT SCREW QTY.2

ASSEMBLY INSTRUCTIONS
Page
CAC-700
HARDWARE ILLUSTRATION
1.2
(B1) M8 NYLON LOCK NUT QTY.2
CAC700-032008
(B2)M10 NYLON LOCK NUT QTY.4
(C1)M8(I.D.)FLAT WASHER Ø18 QTY.4
2
13456
(C2)M8(I.D.)FLAT WASHER Ø24 QTY.4
(C3)M10(I.D.)FLAT WASHER Ø27 QTY.4
(C4)3/8" ROUND END CAP WASHER QTY.4
(C5)M8 SPRING WASHER QTY.4

ASSEMBLY INSTRUCTIONS
Page
CAC-700
HARDWARE ILLUSTRATION
2CAC700-032008
D1. D2. D3. D4.
D5. D6. D7.
(D1)Ø50X10 END COVER(8130-131)
(D2)40X80 END CAP(9211-113)
(D3)Ø60X42H DECK BUFFER(9214-037)
(D4)40X80 ROUND END COVER(9261-070)
(D5)40X80 FOOT CAP(9261-071)
(D6)40X80 FOOT CAP(9261-072)
(D7)95X140L RUBBER PAD(9630-003)
-------------------------------------------[2PCS]
-------------------------------------------------[2PCS]
--------------------------------------[2PCS]
----------------------------------[2PCS]
------------------------------------------------[1PCS]
------------------------------------------------[1PCS]
-----------------------------------------[2PCS]

ASSEMBLY INSTRUCTIONS
Page
CAC-700
3CAC700-032008
PARTS ILLUSTRATION SHEET
A[1SET] B[1SET] C[1PCS]
5584-K007
40X80X2tX600L
D[1PCS]
5584-K008
40X80X2tX600L
E[1SET]
8220-148
Ø25.4X73.5L
F[2PCS]
8386-101
G[1PCS]
8830-017 H[1PCS] 9121-064 I[1PCS] 9111-065

ASSEMBLY INSTRUCTIONS
Page
CAC-700
4CAC700-032008
Above shows STEP1
assembled and completed
D2
A
D2
D7
D7
C3X2
A3X2
D6
D5
A4X2
C4X2
B2X2
F
C3X2
A3X2
D3
D3
D4
D
C
F
C4X2
B2X2
A4X2
D4

ASSEMBLY INSTRUCTIONS
Page
CAC-700
5
CAC700-032008
Above shows STEP2
assembled and completed
I
A2
C5
C2
A2
C5
C2
B1 C1
C1 A1
D1
D1 G
C1
B1
C1 A1
E
B
C2
C5
A2
C2
C5
A2
H
A5
A5