SteelFlex FPR112 User manual

USER MANUAL
FPR112

1
CONSOLE DISPLAY
FPR112
KPH indicates kilometer/per hour.
MPH indicates mile/per hour.
TIME
CALORIES
DISTANCE
PULLS
PEAK POWER
LOAD
MAX SPEED
It indicates resistance and range is from L1
to L30.
WATT indicates power consumption of workout.
HP means horse power.
It counts only when strap is pulled out
over 120 cm.
M indicates meter.
Y indicates yard.
Workout calories.
When pulling out the strap, time is counted.
When retracting the strap, time is not counted.

2
BUTTON
RESISTANCE KNOB
FPR112
Press and hold for a while to reset.
Switch KPH/MPH.
Switch WATT/HP.
Press to wake console up.
Press and hold for a while, console goes into
sleep mode.

3
OPERATION
FPR112
Step 1
Step 2
Step 3
NOTE:
1. Press to switch KPH/MPH and WATT/HP.
2. Press and hold for a while, workout data can be clear and reset.
3. If machine is not used in 5 minutes, console goes into sleep
mode automatically.
Pull out the strap and it can be calculated automatically.
No need to press any button.
When wakes up the console, information below can
be displayed.
If console is in sleep mode, press to wake it up.
AUTO CALCULATING MODE
CALIBRATION
When turning resistance knob to lightest level, but L1 is not showed on
console, the machine needs to do calibration.
How to calibrate?
Turn resistance knob to lightest level, press and together and
hold for a while, when L1 is showed on LOAD of console, calibration is
completed.