SteelFlex CLP-600 User manual

OWNER'S MANUAL
CLP-600
THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF
EQUIPMENT. TO MINIMIZE RISK, YOU MUST FOLLOW THESE RULES:
1.Inspect equipment before each workout. Check that all nuts, bolts, screws and
pop pins are in place and fully tightened. Also, before use, check cylinders for leaking.
Replace all worn parts immediately. Never use machine if any parts are
damaged or missing. Fallure to follow these rules may result in serious injury.
2.Keep clear of the cylinder and all moving parts when the machine is in use.
3.Exercise with care. Perform your exercises at a smooth moderate pace; never
perform jerky or uncoordinated movements that may cause injury.
4.It is recommended that you should workout with a training partner.
5.Do not allow children or minors to play on or around this equipment.
6.If unsure of proper use of equipment, call your local distributor.
7.WARNING: Consult your physician before starting your exercise program. For your
own safety do not begin any exercise program without proper instruction.
The Surgeon General
has determined that lack
of physical activity is
detrimental to your health.TM
Trademark of United States Fitness Produots Council
All manuals and user guides at all-guides.com
all-guides.com

ASSEMBLY INSTRUCTIONS
Page
CLP-600
HARDWARE ILLUSTRATION
1.1
(A2)ROUND INNER HEX SCREW M8X40L PARTIAL QTY.4
CLP600-032008
2
13456
(A1)HEX BOLT M8X25L PARTIAL QTY.4
(A3)HEX BOLT M8X60L PARTIAL QTY.2
(A4)HEX BOLT M10X60L PARTIAL QTY.4
(A5)HEX BOLT M10X100L PARTIAL QTY.2
All manuals and user guides at all-guides.com

ASSEMBLY INSTRUCTIONS
Page
CLP-600
HARDWARE ILLUSTRATION
1.2CLP600-032008
2
13456
(A7)BOLT CAP(9212-024) QTY.8
(A6)HEX BOLT M12X80L PARTIAL QTY.2
(A8)M10X25L SOCKER FLAT SCREW QTY.8
All manuals and user guides at all-guides.com

ASSEMBLY INSTRUCTIONS
Page
CLP-600
HARDWARE ILLUSTRATION
1.3
(B1) M8 NYLON LOCK NUT QTY.4
CLP600-032008
(B2)M10 NYLON LOCK NUT QTY.6
(C1)M8(I.D.)FLAT WASHER Ø18 QTY.8
2
13456
(C2)M8(I.D.)FLAT WASHER Ø24 QTY.6
(C4)M10(I.D.)FLAT WASHER Ø27 QTY.4
(C5)3/8" ROUND END CAP WASHER QTY.4
(C7)M8 SPRING WASHER QTY.6
(B2)M12 NYLON LOCK NUT QTY.2
(C3)M10(I.D.)FLAT WASHER Ø20 QTY.4
(C6)1/2" ROUND END CAP WASHER QTY.4
All manuals and user guides at all-guides.com

ASSEMBLY INSTRUCTIONS
Page
CLP-600
HARDWARE ILLUSTRATION
2CLP600-032008
D1. D2.
D6. D7.
D9.
(D1)Ø50X10 END COVER(8130-131)
(D2)60X50 PLASTIC BUSHING(9211-033)
(D3)50X50X1.8t ROUND END CAP(9211-087)
(D4)40X80 END CAP(9211-113)
(D5)30X60 END CAP(9211-139)
(D6)Ø60X42H DECK BUFFER(9214-037)
(D7)40X80 ROUND END COVER(9261-070)
(D8)40X80 FOOT CAP(9261-071)
(D9)40X80 FOOT CAP(9261-072)
-------------------------------------------[8PCS]
-------------------------------------[2PCS]
-------------------------------[4PCS]
-------------------------------------------------[1PCS]
--------------------------------------------------[4PCS]
-------------------------------------[2PCS]
---------------------------------[2PCS]
------------------------------------------------[1PCS]
------------------------------------------------[1PCS]
D3. D4.
D5. D8.
All manuals and user guides at all-guides.com

ASSEMBLY INSTRUCTIONS
Page
CLP-600
3CLP600-032008
PARTS ILLUSTRATION SHEET
A[1SET] B[1SET]
I[1PCS]
5584-K007
40X80X2tX600L
J[1PCS]
5584-K008
40X80X2tX600L
K[2SET]
8220-148
Ø25.4X73.5L
M[2PCS]
8386-101 N[2PCS] 8830-016
C[1SET] D[1SET]
E[1SET]
F[1SET]
G[1SET]
6640-007
H[1SET]
6640-008
L[2SET]
8220-149
Ø25.4X89L
O[1PCS]
9111064 P[1PCS] 9121066
All manuals and user guides at all-guides.com
all-guides.com

ASSEMBLY INSTRUCTIONS
Page
CLP-600
4CLP600-032008
Above shows STEP1
assembled and completed
D7
D7
M
A7X2
B2X2
C5X2
I
D6
D6
C4X2
A4X2
A
D4
D5
D5
C4X2
A4X2
D8
J
D9
A7X2
B2X2
C5X2
M
All manuals and user guides at all-guides.com

ASSEMBLY INSTRUCTIONS
Page
CLP-600
5
CLP600-032008
Above shows STEP2
assembled and completed
B2X2 C3X2
H
C3X2
A5X2
G
C1 A2
B1 C1
A2 C1
C1
B1
N
ND1
D1
D
B1 C1
A2 C1
D5
L
D5
C1 A2 C1
B1
A8
A8
All manuals and user guides at all-guides.com

ASSEMBLY INSTRUCTIONS
Page
CLP-600
6CLP600-032008
Above shows STEP3
assembled and completed
F
D3
D3
A7X2
A6X2
C6X2
C6X2
B2X2
A7X2
K
K
E
D1
D3
C
L
D1
D1
D1
D1
D1
A8
A8
A8
A8
A8
A8
All manuals and user guides at all-guides.com

ASSEMBLY INSTRUCTIONS
Page
CLP-600
7
CLP600-032008
Above shows STEP4
assembled and completed
O
P
A1X4
C7X4
C2X4
M8 SPRING WASHER
M8X10L ROUND INNER HEAD
D3
B
D2
D2
C2X2
C7X2
A3X2
All manuals and user guides at all-guides.com