Suncast ML141 User manual

A_j Top Panel B_] Back Panel CJ Right Side Panel CJJ Left Side Panel Bottom Panel
0630175 1 PC 0630179 1 PC 0630178 1 PC 0630177 1 PC 0630176 1 PC
0630180 1 PC 0630181 4 pcs 0630182 4 PCS 0630184 10 PCS
© 2004 Suncast Corporation H Patents Pending 0660015
OWNER'S MANUAL STORAGE TRENDS METAL STORAGE CUBE
ML141
IMPORTANT:
Follow instructions listed below to assure fast, easy and correct
assembly. This product contains parts that can be damaged if
incorrectly assembled
Before assembling, please count your parts and hardware as
listed below.
Do not fully tighten screws until the product is fully assembled.
REPLACEMENT PARTS ORDERING INSTRUCTIONS:
Call Suncast for pricing information. Call 800-846-2345 or 630-879-
2050. Monday-Friday 8:OOam-4:30pm Central Time (except holidays).
Or see www.suncast.com
Shelf Caster Hj Truss Head
M4. 2 x l3mm-AB
Caster Bushing
(Comes installed in
Bottom Panel D) .Li Flat Head
Socket Cap
M6x 1.Ox25mm
5/32 Wrench
0630009 1 PC
For
Information on
Suncast products and
replacement parts see
www.suncast.com
€t.

1. Attach Side Panels (CL) & (CR) to
Bottom Panel (0), using screws (I).
2. Making sure that the Suncast logo
faces away from the unit, attach Top
Panel (A) to Side Panels (CL) & (CR)
using screws (H).
3. Attach Back Panel (B) to Side Panels
(CL) & (CR), Top Panel (A), and Bottom
Panel (D) using screws (H).
H
0660015

4. Place Cube on its top and push Casters
(F) into caster bushing holes in Bottom
Panel (D).
5. Insert Shelf (E) into cube at an angle,
then place one side on shelf brackets
provided on Left Side Panel (CL).
6. With Shelf (E) inside cube and resting
on one set of shelf brackets, lower
opposite side of shelf onto remaining
shelf brackets.
Caster Bushing Hole
F
0660015
E