Sunjoy D-GG001PST-F1 User manual

Assembly Instruction
D-GG001PST-F1
Production Number:2018xxxx

IMPORTANT:
1. When installing and assembling your gazebo, it is recommended that two or more adults are involved.
2. Do not use the gazebo during an electrical storm, as there is a remote chance of getting struck by lightning.
3. Do not climb on top of the gazebo. Falling off the gazebo can result in serious injury, possibly even death.
4. Do not leave the gazebo assembled when there is a risk of high wind, as possible damage will occur to the
structure.
5. Do not use lanterns that contain open flames.
6. This package contains small items and plastic bags that should be kept away from children.
7. Ensure that all connectors & poles are firmly secured in position fully. It is important to do so before use so
as to avoid collapsing or damage to the item, which could result in injury.
8. KEEP ALL FLAME AWAY FROM THIS SHELTER FABRIC. The fabric may burn if it is exposed to
prolonged contact with a flame source. The application of any foreign substance to the fabric may render the
flame-resistant properties ineffective.
USE & CARE:
1. This gazebo is not a permanent structure and should be disassembled & stored away after use.
2. Do not repack your gazebo until completely dry.
3. This gazebo must not be left erect in windy conditions.
4. Steel components for garden accessories and furniture are treated with rust inhibiting paint that protects
them from rust. However, due to the nature of steel, surface oxidation (rusting) will occur if this protective
coating is scratched. This is a natural process. To minimize this condition, it is recommended that care be
taken when assembling and handling the product in order to prevent the paint from being scratched. Surface
rust can be removed easily using a very light application of common cooking oil. If surface oxidation (rusting)
occurs and no measures are taken to correct it, the oxidation may start dripping onto the deck or patio, which
may cause damaging stains that may be difficult to remove.
Thank you for your purchase! We are pleased that you have chosen Sunjoy for your outdoor furniture purchase.
Our clear, easy to follow, step by step instructions will guide you through the project from start to finish
Please do not return this product to the store. For technical assistance or replacement parts, please call Sunjoy Group
at 1 [phone] between 8:00 AM EST and 8:00 PM PST. You may fax your replacement parts form (which is
included in the packaging) to 1 [phone] or email to customer[email protected]

Post (1) A1 2
Post (2) A2 1
Post (3) A3 1
Big Beam B 4
Big Connector C 1
Small Beam D 4
Long Screen E 2
Short Screen F 2
Glass Panel G1 1
Glass Panel G2 1
Hook rack H 1
Bolt I 20
Bolt I I 3
Big Canopy J 1
Small Canopy K 1
Hook L 1
LED Light M 4
Parts List

Fig.1: Attach the Long Screen (E) and the Short Screen (F) to Post (A1、A2、A3) with the Bolt (I).
Fig.2: Attach the Big Beam (B) to the Big Connector (C), and then attach the Hook (L ) to the Big
Connector (C).
Fig.3: Insert the connector of the Big Beam (B) into the intubation tube of Post (A1, A2, A3), then
put the Big Canopy (J) on big top, do not fully spread.
Fig.4: Insert the bottom connector of the Small Beam（D）to the upper pole of the Big Beam
（B）
.
Fig.5:Extend the Small Canopy (K) onto the small top by fixing the canopy at four corners of top.
Fig.6:Take off the back cover of LED light (M), and match batteries
into sockets. Attach back
cover to LED light (M).(Note: to purchase "AAA” battery for LED)
Fig.6-1:Hang the assembled LED light (M) into holes of Beam (B) (Note: Pull down forward tightly
after LED lights hung into Beam holes).

Made in China
2017-8
FF Φ6X230MM Floor Nail 8PCS
Hardware Pack
Fig.7: Extend the Big Canopy (J) onto the big top by fixing the canopy at four corners of top.
Fig.7-1:Attach the Hook (H) to Glass Panel (G2) with the Bolt (II).
Fig.8: Insert the Glass Panel (G1, G2) into the Post (A1, A2, A3), then attached them tightly with the
Bolt (I).
Fig.9: Fix the gazebo to the lawn by using the Floor Nail (FF).