Sunjoy L-GZ098PST-1B User manual

IMPORTANT:
Please read and follow all safety statements, warnings, assembly instructions, use & care
directions, before attempting to assemble.
WARNINGS:
1. Assembly Instructions must be followed.
2. Pegs supplied must be used to hold this gazebo in place when upright.
3. Warranty does not cover damage due to extreme weather conditions.
4. Do not use candles, matches or open flames of any kind in or near a tent.
5. Do not cook inside the tent.
6. Build campfires downwind and several meters away from a tent and be sure to fully
extinguish campfires before leaving a campsite or before retiring for the night.
Hampton Gazebo
ITEM# L-GZ098PST-1B
Assembly Instruction

7. Exercise extreme caution when using fuel-powered lanterns or heaters inside a tent and use
battery-operated lanterns whenever possible.
8. Do not refuel lamps, heaters or stoves inside a tent.
9. Extinguish or turn off all lanterns before going to sleep.
10. Do not smoke in a tent.
11. Do not store flammable liquids inside a tent
12. KEEP ALL FLAME AND HEAT SOURCES AWAY FROM THIS TENT FABRIC. This tent is
made of flame-resistant fabric. It is not fireproof. The fabric will burn if left in continuous contact
with a flame source.
Please note parts AA, BB, and CC MUST be used in order to assure stability of this unit.
USE & CARE:
1. This gazebo is not a permanent structure and should be disassembled & stored away after
use.
2. Do not repack your gazebo until completely dry.
3. This gazebo must be assembled by two adults or more.
4. This gazebo must not be left erect in windy conditions.
5. Loading limit of the hook is 33 lbs.
6. Steel components for garden accessories and furniture are treated with rust inhibiting paint
that protects them from rust. However, due to the nature of steel, surface oxidation (rusting)
will occur if this protective coating is scratched. This is a natural process. To minimize this
condition, it is recommended that care be taken when assembling and handling the product in
order to prevent the paint from being scratched. If scratching or damage occurs, it is
recommended that the area be touched-up immediately with rust inhibiting paint, which is
convenient to purchase from your local shop. Surface rust can be removed easily using a very
light application of common cooking oil. If surface oxidation (rusting) occurs and no measures
are taken to correct it, the oxidation may start dripping onto the deck or patio, which may cause
damaging stains that may be difficult to remove.

1 Pole1 4
2 Pole2 4
3 Long Support Pole3 8
4 Short Support Pole4 4
5 Pole5 4
6 Pole6 4
A Base plate 4
B Corner connector 4
C Top connector 1
DSmall Canopy 1
EBig Canopy 1
F Mosquito netting 1
AA ￠4x180 Stake 8PCS
BB Rope 8PCS
CC Rope peg 8PCS
DD Plastic loop 40
Parts List

Fig.1: Insert the Short Support Pole 4 into Long Support Pole 3, then insert the other end of Long
Support Pole 3 into the Corner Connector B as above drawing.
Fig.2: Insert the Pole 5 into Pole 6 (Note: Before last Pole 5 inserted into Pole 6, put Big Canopy E onto the
Big Top, do not fully spread). Then insert Pole 6 into Top Connector C.
Fig.3: Insert pole 5 into the corner connector B.

Fig.4: Put Small Canopy D onto Small Top. Then insert the spring clip end of Pole 1 into the Corner
Connector B. Please make sure the Pole 1 is completely inserted into Connector B.
Fig.5: Insert the spring clip end of Pole 2 into Pole 1, and then insert Pole 2 into Base Plate A, then
fix gazebo by using Stake AA through Base Plate A.

Fig.6: Fully Spread Big Canopy E on the top frame. Hang the Big canopy metal hook into hole of
Pole 2 first, and then hang the plastic hook into Base plate A.
Fig 7: Tie Rope BB onto four corner of Big Canopy, and then use Rope Peg CC to secure it to the
ground. Finally, hang Mosquito Netting to Pole (3&4) with Plastic loop DD.