Sunjoy L-GZ038PST-3 User manual

Double Arch Gazebo Instruction manual
Item #: L-GZ038PST-3
SKU #: 210018672
IMPORTANT:
Please read and follow all safety statements, warnings, assembly instructions, use & care directions before
attempting to assemble.
1. When installing and assembling your gazebo, it is recommended that 2 or more adults are involved.
2. Do not use the unit during an electrical storm, as there is a remote chance of getting struck by lightening.
3. Do not climb on top of the gazebo. Falling off the gazebo can result in serious injury, possibly even death.
4. Do not leave the gazebo assembled when there is a risk of high wind, as possible damage will occur to the
structure.
5. Never barbecue under this gazebo or use lanterns that contain naked flames.
6. This package contains small items and plastic bags that should be kept away from children.
7. Ensure that all connectors & poles are firmly secured in position fully. It is important to do so before use so
as to avoid collapsing or damage to the item, which could result in injury.
8. WARNING: Keep all flame and heat sources away from this tent fabric. This tent is made with fabric that
meets CPAI – 84 specifications for flame resistance. It is not fire proof. The fabric will burn if left in continuous
contact with any flame source. The application of any foreign substance to the tent fabric may render the
flame-resistant properties ineffective.

Screen 1 A 4
Screen 2 B 4
Pole C 4
Big Top Long Pole
Connector D 4
Big Top Long Pole E 4
Big Top Short Pole F 4
Big Top Connector G 1
Small Top Pole H 4
Small Top Connector I 1
Cornor Shelf J 4
Finial K 1
Decorative Finial L 4
Hook M 1
Candle Holder N 1
Big Canopy O 1
Small Canopy P 1
Mosquito Netting Q 1
Parts List

AA M6×20 Bolt 16 pcs
BB M6×32 Bolt 12 pcs
CC M6 Washer 28 pcs
DD M6 Wrench 1 pc
Hardware Pack1
AB
A
B
A
BA
B
C
C
C
C
J
JJ
J
Fig.1
Fig.2
Fig.3
Step1
A
BB
CC
CCBB
BA
Fig.1
B
A/B CC AA
C
Fig.2
B
A
JFig.3
Fig.1: Connect Screen 1(A) and Screen 2(B) by M6 Washer (CC) and
M6×32 Bolt (BB).
Fig.2: Attach Pole (C) to Screen 1(A) and Screen 2(B) by M6 Washer (CC)
and M6×20 Bolt (AA).
Fig.3: Place the Cornor Shelf (J) to Screen 1(A) and Screen 2(B) as per
Fig.3.

AA M6×20 Bolt 4 pcs
CC M6 Washer 4 pcs
DD M6 Wrench 1pc
Fig.4: Insert Big Top Long Pole Connector (D) into Screen 1(A) and Screen 2(B).
Fig.5: Insert Big Top Long Pole (E) into Big Top Long Pole Connector (D).
Fig.6: Hang up the Hook (M) to Big Top Connector (G), then insert Big Top Long Pole (E) and Big Top Short
Pole (F) into Big Top Connector (G).
Hardware Pack2
Fig.4 D
A
B
EDFig.5 Fig.6
F
EE
F
G
FM
Fig.7 AA
CC
F
C
H
E
Fig.9
IH
H
H
H
Fig.8
Fig.7: Connect Big Top Short Pole (F) and Pole (C)
by M6 Washer (CC) and M6×20 Bolt (AA).
Fig.8: Insert Small Top Pole (H) into Small Top
Connector (I).
Fig.9: Insert Small Top Pole (H) into Big Top Long
Pole (E).
Fig.4
Fig.5
Fig.6
Fig.7
Fig.8
Fig.9
Step2

EE ∮6×180mm Stake 16pcs
FF Plastic Tie 40pcs
GG Touch Up Paint 1pc
Hardware Pack3
Fig.13
Fig.10
Fig.11
Fig.14
Fig.12
Step3
N
M
Fig.12
P
K
Fig.10
O
Fig.11L
Fig.13
Q
C(A/B)
FF
Fig.10: Place the Small Canopy (P) onto the Small Top,
then place Finial (K) onto Small Top Connector (I).
Fig.11: Place the Big Canopy (O) onto the Big Canopy,
then place Decorative Finial (L) onto Big Top Long
Pole Connector (D).
Fig.12: Hang up the Candle Holder (N) to Hook (M).
Fig.13: Hang up the Mosquito Netting (Q) to Pole (C),
Screen 1(A) and Screen 2(B) by Plastic Tie (FF).
Fig.14: Fix the gazebo by ∮6×180mm Stake (EE).
Now your gazebo is ready for use.
Fig.14
EE EE EE
EE
AB

USE & CARE
1. This Gazebo is not a permanent structure and should be disassembled & stored away after use.
2. Do not repack your gazebo until completely dry.
3. This Gazebo must not be left erect in windy conditions.
WARNINGS
1. Assembly Instructions must be followed.
2. Pegs and ropes supplied must be used to hold this gazebo in place when upright.
3. Warranty does not cover damage due to extreme weather conditions.
CUSTOMER SERVICE
Sunjoy Industries warrants to the original purchaser that this item is free from defects in workmanship and
materials of your item provided the item was factory-sealed at the time of purchase and is maintained with care
and used only for personal, residential purposes. The item is warranted to be free from defects in material or
workmanship for a period of 6 months. Should any manufacturing defect arise within this warranty period,
Sunjoy Industries will repair or replace (at our option) any defective merchandise upon proof of purchase;
however, transportation and delivery costs, as well as labor and material charges to remove or replace parts,
remain the responsibility of the purchaser. A purchaser of an "open box," previously-returned, or "clearance"
item, as well as original purchasers outside of the warranty period, may obtain replacement parts from Sunjoy
Industries for products in current production, at nominal cost.
If you are within the return policy that most stores have, you do have the option of returning this item back to
the store which you bought it from for an exchange of the same item, or a refund of the purchase.
If you are within or beyond the return policy that most stores have, and need tech. assistance or replacement
parts, please call Sunjoy Industries at 1(866) 578-6569 from 8:30 am to 5:30 pm eastern standard time or
e-mail to [e-mail] or fax your parts replacement order form together with the purchase
receipt to 1 [phone] for assistance.