Sunjoy L-GZ238PST-11C User manual

ASSEMBLY INSTRUCTIONS
ITEM# L-GZ238PST-11C
Grill Gazebo
IMPORTANT:
Please read and follow all safety statements, warnings, assembly instructions, use and care directions before
attempting to assemble.
1. When installing and assembling your gazebo, it is recommended that 2 or more adults are involved.
2. Do not use the unit during an electrical storm, as there is a remote chance of getting struck by lightning.
3. Do not climb on top of the gazebo. Falling off the gazebo can result in serious injury, possibly even death.
4. Do not leave the gazebo assembled when there is a risk of high wind, as damage may occur to the
structure.
5. This package contains small items and plastic bags that should be kept away from children.
6. Ensure that all connectors & poles are firmly secured in position fully. It is important to do so before use so
as to avoid collapsing or damage to the item, which could result in injury.
7. WARNING: Keep flame and heat sources away from the gazebo fabric. The fabric may burn if it is exposed
to prolonged contact with a source of heat. The application of any foreign substance to the gazebo fabric may
render the flame-resistant properties ineffective.
8. WARNING: Please take down the gazebo during strong wind. The manufacturer or retailer is not liable for
any loss of the product or other items due to the failure to take down the gazebo during strong wind.
Tools required: Ladder and Screwdriver (not included) .

Parts List
Pole （1）A1 2
Pole（2）A2 2
Base B 4
Base cover C 4
Corner top beam D 4
Small Top Connector E 1
Big Top Connector F 1
Small Top Pole G 4
Long Screen I 2
Short Screen J 2
Shelf K 2
Support bar L 4
Big Canopy O 1
Small Canopy P
1
Hook H 1

AA M6X15 Bolt
8 PCS
BB M6 Flat Washer
40 PCS
CC M6X20 Bolt
16 PCS
DD M6X35 Bolt
8PCS
M6 Nut
EE 8 PCS
Z M6 Wrench 1 PCS
Hardware Pack 1

Fig.1: Attach Base Cover (C) to Pole A1 (A2), tighten Base (B) with Pole A1（A2）by using Bolt ( AA ) and Flat
Washer(BB).
Fig.2: Attach the Long Screen (I) and Short Screen (J) to Pole A1（A2）with Bolt (CC) and Flat Washer(BB)
Fig.3: Insert Corner top beam (D) into Big Top Connector (F), then attach Hook (H) into Big Top Connector (F).
Fig.4: Fix Corner top beam (D) to Pole A1（A2）with Bolt( DD) and Flat Washer(BB).
Fig.5: Insert Small Top Pole (G) into Small Top Connector (E).
Fig.6: Put Big Canopy (O) onto the Big Top, do not fully spread, attach Small Top Pole (G) to Corner top
beam (D) by M6 X 35 Bolt (DD), M6 flat Washer (BB) and M6 Nut (EE).
AA M6X15 Bolt
8 PCS
BB M6 Flat Washer
8 PCS
FF
Φ5X160MM “7” stake
8 PCS
Hardware Pack 2
Fig.7: Put Small Canopy (P), fully spread
Big Canopy (O), using the Velcro’s to fasten
it to the frame; fix Support Bar (L) to Shelf (K)
by using Bolt (AA) and Flat Washer (BB).

USE & CARE
1. This Gazebo is not a permanent structure and should be disassembled & stored away after use.
Fig.8: Fix Glass side bar (K) to Pole A2（A1 ）by using Bolt
(AA) and Flat Washer (BB).
Fig.9: Fix another end of Support Bar (L) to pole A1（A2）,then
insert the pin.
Fig.10: Lift up the Base Cover(C), fix the completely
assembled gazebo into the ground by using “7”stakes (FF).
2. Do not repack your gazebo until completely dry.
3. This Gazebo must be assembled by two adults or more.
4. If windy conditions exist please disassemble the gazebo.
WARNINGS
1. Assembly Instructions must be followed.
2. Pegs supplied must be used to hold this gazebo in place when upright.
3. Warranty does not cover damage due to extreme weather conditions.
CUSTOMER SERVICE
Sunjoy Industries warrants to the original purchaser that this item is free from defects in workmanship and
materials of your item provided the item was factory-sealed at the time of purchase and is maintained with
care and used only for personal, residential purposes. The item is warranted to be free from defects in
material or workmanship for a period of 6 months. Should any manufacturing defect arise within this warranty
period, Sunjoy Industries will repair or replace (at our option) any defective merchandise upon proof of
purchase; however, transportation and delivery costs, as well as labor and material charges to remove or
replace parts, remain the responsibility of the purchaser. A purchaser of an "open box," previously-returned,
or "clearance" item, as well as original purchasers outside of the warranty period, may obtain replacement
parts from Sunjoy Industries for products in current production, at nominal cost.
If you are within the return policy that most stores have, you do have the option of returning this item back to
the store which you bought it from for an exchange of the same item, or a refund of the purchase.