Sunjoy SHELTON A101001910 User manual

DO NOT RETURN TO RETAILER
IF YOU HAVE ANY QUESTIONS OR CONCERNS
PLEASE VISIT OUR WEBSITE AT:
www.sunjoyonline.com
OR TOLL FREE AT:
Production Number：2021300015
1-866-578-6569
8:00 AM EST to 8:00 PM PST
OR EMAIL AT
[email protected]

ASSEMBLY INSTRUCTIONS
ITEM# A101001910
SKU#236828
SHELTON 10’x12’ GAZEBO

Please read and understand this entire manual before attempting to assemble orinstall the product.
•When installing and assembling the item, it is recommended two or more adults are involved
•This product is intended for outdoor use only and should be placed on flat, horizontal ground
•Do not use the unit during an electrical storm, as there is a remote chance of getting struck by lightning
•Do not climb on top of the item. Falling off it can result in serious injury, possibly even death
•Do not use open-flame appliances or accessories near the gazebo
•This package contains small items and plastic bags that should be kept away from children
•Ensure all connectors and poles are firmly secured in position. It is important to do so before use to
avoid collapsing or damage to the item, which could result in injury
•Center hook’s maximum weight capacity is 26 lbs
Keep all flame and heat sources away from the tent fabric. This tent is made with fabric that meets CPAI-84
specifications for flame resistance. It is not fireproof. The fabric will burn if left in continuous contact with
any flame source. The application of any foreign substance to the tent fabric may render the flame-resistant
properties ineffective. Remove the roof canopy during severe weather conditions such as sustained strong
winds, hurricanes, tropical downpours and snow. The manufacturer or retailer is not liable for any loss of
the product or other items due to the failure to take down the item during any inclement weather. It is
critical to secure assembled gazebo to the ground with provided stakes or bolt it down to the patio/deck
with 16 appropriate bolts/screws (not included). Make sure you have required hardware prior the assembly.
Before beginning assembly ofproduct, make sure all parts arepresent. Compare parts with package
contents listandhardware contents list. If any part is missing or damaged, donot attempt to assemble
the product.
If you discovered anissue, please call us toll free at: 1-866-578-6569.
Safety Information
W ARNING
PREPARATION
TOOLS NEED (NOT INCLUDED)

Large Panel P00630000401 A 4
Left Panel P00630009401 B1 4
Right Panel P00630010401 B2 4
Long Cross Beam P00500035201 C1 2
Short Cross Beam P00500035301 C2 2
Long Netting Rod P00570001801 D1 2
Short Netting Rod P00570035201 D2 4
Corner Netting Rod P00570035301 D3 4
Big Roof Connector P00050025501 E 1
Connector P00050025601 F 4
Top Oblique Beam1 P00060203801 G1 4
Top Oblique Beam2 P00060203901 G2 4
Top Beam1 P00060204001 H1 2
Top Beam2 P00060204101 H2 2
Hook P005800001 J 1
Large canopy P00110017801 K1 1
Small canopy P00110028801 K2 1
Mosquito netting P00120005901 N 1
Parts List

AA H010010010 M6×25mm screw 16pieces
BB H010010087 M6×20mm screw 20pieces
FF H010110016 M6x15 Screw 20 pieces
CC H050030001 M6 washer 56pieces
DD H070010003 Stake 8 pieces
EE P005100264 Plastic ring 52PCS
WW H090010017 M6 Wrench 1 pieces
Hardware Pack
AA H010010010 M6×25mm screw 2pieces
BB H010010087 M6×20mm screw 4pieces
CC H050030001 M6 washer 4 pieces
EE P005100264 Plastic ring 4pieces
FF H010110016 M6x15 Screw 4 pieces
Spare Hardware Pack

Fig1-1、Fig1-2：Insert the pin on the left panel (B1) into the large panel (A), pull down the left panel (B1) to fix
with the large panel (A) as Fig.1-2, then connect B1 & A by using bolt (AA) and washer (CC). Connect theright
panel (B2) to the large panel (A) in same way. Please do not tighten the bolts here.
Fig1-3．Connect the long crossbeam (C1) to assembled panels (B1 & B2) by using bolt (BB) and washer
(CC).Connect the short cross beam (C2) to assembled panels in same way. Please do not tighten the bolts
here.
Fig1-4. Connect the short netting bar (D2) to the long side of panels (B1 & B2) and Long Cross Beam (C1) by
using screw (FF) and washer (CC). Connect the long netting bar (D1) to the short side of panels (B1 & B2),
corner netting bar (D3) to the large panel (A) in same way.

Fig2-1. Screw the hook (J) to the top center connector (E).；
Fig2-2. Insert the small top support bar (F) to the top center connector (E). Please note the parts label
under the top center connector (E).
Please noted the direction of the top center connector (E), the parts label “H2” face the long Cross beam
(C1), and label “H1” face the short crossbeam (C2).
Fig.2-3. Insert one end of corner support bar (G1 & G2) into the small top support bar (F) in order.
Fig2-4. Insert another end of corner support bar (G1 & G2) into the large panel (A).
Fig2-5. Insert one end of long middle beam (H1) into the top center connector (E).
Fig2-6. Connect another end of long middle beam (H1) to the short crossbeam (C2) by using bolt (BB)
and washer (CC).
Fig2-7. Insert one end of short middle beam (H2) into the top center connector (E). Connect another
end of short middle beam (H2) to the long crossbeam (C1) by using bolt (BB) and washer (CC).

Fig.3-1. Place the large canopy (K1) onto the big top. Please do not spread it here.
Fig.3-2. Place the small Canopy (K2) to the small top along the small top support bar (F), aligning the
corners and stretching it to fit. Tie the small canopy and large canopy together. Position the Gazebo and
tighten all the screws using a (WW).
Fig3-3. Hang the mosquito netting (N) onto the netting bar (D1, D2, D3) by using plastic ring (EE).
Fig.3-4. Secure the assembled gazebo to lawn with peg (DD) through the bottom of panel.

IMPORTANT:
1. When assembling and using this product, basic safety precautions should always be followed to reduce the risk
of personal injury and damage to equipment. Please read all instructions before assembly and use.
2. Some parts may contain sharp edges, wear protective gloves if necessary. At least five or more people are
recommended for safe assembly.
3. Keep all children and pets away from assembly area.
4. At least 6 feet from any obstruction such as fence, garage, house, overhanging branches, laundry line or
electrical wires.
5. Do not use the unit during an electrical storm, as there is a remote chance of getting struck by lightening.
6. Do not leave the gazebo assembled when there is a risk of high wind, as possible damage will occur to the
structure. Remove fabric roof and secure screen & privacy panels to poles.
7. Install on level surface.
8. This package contains small items and plastic bags that should be kept away from children.
9. Check all nuts and bolts for tightness before and during usage. Ensure that all connectors and poles are firmly
secured in position fully. It is important to do so before use so as to avoid a possible collapse or damage to the item,
which could also result in injury.
10.This gazebo is intended for decorative and sunshade purposes only and is not meant to withstand extreme
weather conditions including high winds, torrential rain and snow. Gazebo fabric is water resistant, not water proof
and may leak during exposure to precipitation.