Sunjoy OXFORD A101002600 User manual

DO NOT RETURN TO RETAILER
IF YOU HAVE ANY QUESTIONS OR CONCERNS
PLEASE VISIT OUR WEBSITE AT:
www.sunjoyonline.com
OR TOLL FREE AT:
Production Number：2021200007
1-866-578-6569
OR EMAIL AT
[email protected]
8:00 AM EST to 8:00 PM PST

ASSEMBLY INSTRUCTIONS
ITEM# A101002600
SKU#236830
OXFORD 10’x12’ GAZEBO

Please read and understand this entire manual before attempting to assemble or install the product.
•When installing and assembling the item, it is recommended two or more adults are involved
•This product is intended for outdoor use only and should be placed on flat, horizontal ground
•Do not use the unit during an electrical storm, as there is a remote chance of getting struck by lightning
•Do not climb on top of the item. Falling off it can result in serious injury, possibly even death
•Do not use open-flame appliances or accessories near the gazebo
•This package contains small items and plastic bags that should be kept away from children
•Ensure all connectors and poles are firmly secured in position. It is important to do so before use to
avoid collapsing or damage to the item, which could result in injury
•Center hook’s maximum weight capacity is 26 lbs
Keep all flame and heat sources away from the tent fabric. This tent is made with fabric that meets CPAI-84
specifications for flame resistance. It is not fireproof. The fabric will burn if left in continuous contact with
any flame source. The application of any foreign substance to the tent fabric may render the flame-resistant
properties ineffective. Remove the roof canopy during severe weather conditions such as sustained strong
winds, hurricanes, tropical downpours and snow. The manufacturer or retailer is not liable for any loss of
the product or other items due to the failure to take down the item during any inclement weather. It is
critical to secure assembled gazebo to the ground with provided stakes or bolt it down to the patio/deck
with 16 appropriate bolts/screws (not included). Make sure you have required hardware prior the assembly.
Before beginning assembly ofproduct, make sure all parts arepresent. Compare parts with package
contents listandhardware contents list. If any part is missing or damaged, donot attempt to assemble
the product.
If you discovered anissue ,please call us toll free at: 1-866-578-6569.
Safety Information
W ARNING
PREPARATION
TOOLS NEED (NOT INCLUDED)

Post A P00020039801 4
Post Base B P00010029801 4
Base Protector C P00610015401 4
Short Beam (1) D P00040114101 2
Short Beam (2) E P00040114201 2
Long Beam (1) F P00040114301 2
Long Beam (2) G P00040114401 2
Slanting Bar
Connector H P00050025201 4
Support Bar I P00500035101 8
Big Top Bar J1 P00060203301 4
Connect Bar J2 P00060203401 4
Short Side Bar K P00060203501 2
Long Side Bar L P00060203601 2
Long Netting Bar M P00570001601 4
Short Netting Bar N P00570001701 4
Big Top
Connector O P00050025301 1
Pothook（M8）P P005800105 1
Small Top
Connector Q P00050025401 1
Small Top Bar R P00060203701 4
Small Canopy S P00110007001 1
Large Canopy T P00110017701 1
Wall U P00130001901 1
Mosquito Netting V P00120005201 1
Parts List

Fig.1: Fit the Base protector (C) onto the Post (A), connect the Post base (B) and post (A) by using bolt (AA)
and flat washer (BB).
Fig.2: Insert Beam E (G) to Beam D (F), and fix them by using bolt (CC) and washer (BB).
Fig.3: Attach assembled beam to Post (A) by using bolt (DD) and washer (BB).
AA H010110016 M6X15 bolt 8PCS
BB H050030001 M6 flat washer 64PCS
CC H010010003 M6X15 bolt 40PCS
DD H010010004 M6X35 bolt 16PCS
Z H090010017 M6 wrench 1 PC
Hardware Pack 1

Fig.4: Attach Netting bar N (M) to Beam D (E, F, G) by using bolt (CC) and washer (BB).
Fig.5: Fix Support bar (I) to Beam G (D, E, F) and Post (A) by using bolt (CC) and washer (BB).
BB H050030001 M6 flat washer 28 PCS
CC H010010003 M6X15 screw 4 PCS
EE H010110028 M6X40 bolt 12 PCS
FF H040010004 M6 nut 12PCS
Hardware Pack 2

Fig.6: Insert the Connect bar (J2) to the big top bar (J1), fix them by using bolt (CC) and washer (BB).
Fig.6-1: Insert Big top bar (J1) to Big top connector (O), screw Pothook (P) to Big top connector (O).
Fig.7: Attach the Connect bar (J2) to the post (A) by using screw (EE), washer (BB) and nut (FF).
Fig.8: Insert Short side bar (K) and Long side bar (L) to Big top connector (O).
Fig.9: Attach Side bar K (L) to Slanting bar connector (H) by using bolt (EE), washer (BB) and nut (FF).
Fig.10: Insert Small top bar (R) to small top connector (Q), then place the Small canopy (S) on the small
top and tighten.
Fig.11: Put Large canopy (T) on the big top; do not spread it. Attach assembled small top to Big top bar
(J1) by using bolt (EE), washer (BB) and nut (FF). Then spread the Large canopy (T) and tighten.
GG H070010003 Φ8X180 peg 16 PCS
HH P005100299 Small plastic ring 52 PCS
II P005100265 Big plastic ring 52 PCS
Hardware Pack 2

`
IMPORTANT:
1. When assembling and using this product, basic safety precautions should always be followed to reduce the risk
of personal injury and damage to equipment. Please read all instructions before assembly and use.
2. Some parts may contain sharp edges, wear protective gloves if necessary. At least five or more people are
recommended for safe assembly.
3. Keep all children and pets away from assembly area.
4. At least 6 feet from any obstruction such as fence, garage, house, overhanging branches, laundry line or
electrical wires.
5.Do not use the unit during an electrical storm, as there is a remote chance of getting struck by lightening.
6. Do not leave the gazebo assembled when there is a risk of high wind, as possible damage will occur to the
structure. Remove fabric roof and secure screen & privacy panels to poles.
7. Install on level surface.
8. This package contains small items and plastic bags that should be kept away from children.
9. Check all nuts and bolts for tightness before and during usage. Ensure that all connectors and poles are firmly
secured in position fully. It is important to do so before use so as to avoid a possible collapse or damage to the item,
which could also result in injury.
10.This gazebo is intended for decorative and sunshade purposes only and is not meant to withstand extreme
weather conditions including high winds, torrential rain and snow. Gazebo fabric is water resistant, not water proof
and may leak during exposure to precipitation.
Fig.12: Hang Mosquito netting (V) to netting bar N (M) by using
Plastic ring (HH).
Fig.13: Hang Wall (U) to beam (F, D, E, G) by using Plastic ring (II).
Fig.14: Lift Base protector (C), fix assembled gazebo with Peg (GG).
Now, your Gazebo is ready for use.