Sunlighten mPulse 3-in-1 Series User manual

USER MANUAL mPulse 3-in-1®INFRARED THERAPY

2
CONGRATULATIONS!
You are now the owner of an mPulse 3-in-1® sauna.
With Sunlighten infrared heat, you are empowered to improve your quality of
life. Just follow our ASSEMBLY INSTRUCTIONS and SAUNA PROTOCOL to begin
your wellness journey with the very best in infrared therapy.
PLEASE NOTE
Do not use this sauna to treat any health problems without consulting your health care practitioner.
Sunlighten does not provide medical advice, education or treatment. Our information should not be
relied on in making decisions about your health. Always consult your health care practitioner
for medical advice.
Our patented Solocarbon mPulse 3-in-1®
is the only sauna heater on the market to provide
all three infrared wavelengths in one place
and customisable to each user.

3
PRE-INSTALLATION
mPulse 3-IN-1® SERIES SPECIFICATIONS 4
PRE-INSTALLATION CHECKLIST 5
OPERATING INSTRUCTIONS
CONTROL SCREEN: INITIAL SETUP 6
SAUNA SETTINGS 7
HEALTH PROGRAMS 10
SCHEDULING SAUNA SESSIONS 13
MEDIA APPS 14
CHROMOTHERAPY 16
WARM UP TIME & USAGE GUIDELINES 18
SAUNA PROTOCOL 19
HEALTH &SAFETY 20
FAQS
ASSEMBLY 23
USAGE 23
MAINTENANCE 25
TROUBLESHOOTING 28
DIAGNOSTICS 29
WARRANTY 30
SAFETY CERTIFICATION 31
A SEPARATE PACKET WITH ASSEMBLY INSTRUCTIONS IS INCLUDED WITH YOUR SAUNA.
CONTENTS

4
PRE-INSTALLATION
mPulse 3-in-1® SERIES SPECIFICATION
DIMENSIONS 110cm x 106cm x 200cm (W x L x H)
POWER 240V, 2160 watts. Dedicated 10A circuit and 10A power socket
protected by a 16A RCBO installed in the meter box.
Minimum 1.5mm cable required for circuit;
2.5m cord exists from back left of base.
mPulse Aspire
DIMENSIONS 132cm x 121cm x 200cm (W x L x H)
POWER 240V, 2600 watts. Dedicated 15A circuit and 15A power socket
protected by a 16A RCBO installed in the meter box.
Minimum 2.5mm cable required for circuit;
2.5m cord exists from back left of base.
mPulse Believe
DIMENSIONS 179cm x 121cm x 200cm (W x L x H)
POWER 240V, 3400 watts. Dedicated 15A circuit and 15A power socket
protected by a 16A RCBO installed in the meter box.
Minimum 2.5mm cable required for circuit;
2.5m cord exists from back left of base.
mPulse Conquer
DIMENSIONS 179cm x 179cm x 200cm (W x L x H)
POWER 240V, 4600 watts. Hardwire to a 25A power supply protected
by a 25A RCBO installed in the meter box.
Minimum 4.0mm cable required for circuit;
2.5m cord exists from back left of base.
mPulse Discover
DIMENSIONS 217cm x 179cm x 200cm
POWER 240V, 4800 watts. Hardwire to a 25A power supply protected
by a 25A RCBO installed in the meter box.
Minimum 4.0mm cable required for circuit;
2.5m cord exists from back left of base.
mPulse Empower

5
PRE-INSTALLATION
PRE-INSTALLATION CHECKLIST
1. Haveacertiedelectricianinstalladedicatedoutletforthesauna.  
Failure to do so will affect the operating performance of the sauna.
2. Remember your sauna should be assembled by 2 or more people.
3. Donotplaceplumbingorplumbingxturesinthesauna.
4. Keep all liquids away from the heating panels and electronics.
5. Install sauna on a level surface.
6. Install sauna in an area that is dry and protected from the weather.
7. Keepammableobjectsandcorrosivechemicalsubstancesaway
from the sauna.
8. Installation of the sauna in an area below standard room temperature
can increase warm up time.
READ BEFORE OPERATING
To reduce risk associated with hazardous voltage:
•Unplug the sauna from electrical outlet before storage or when not in use
for expanded periods of time.
•Do not operate the sauna if its not on a dedicated electrical circuit, or has
a damaged power cord/plug.
•If the sauna is not working properly or an odor persists, immediately unplug
the sauna.
•Do not leave the sauna unattended while heating for longer than the sauna’s
pre-set time periods.
• Nevercoverholesoroorgratewithtowels,mats,garments,etc.

6
OPERATING INSTRUCTIONS
6
CONTROL SCREEN: INITIAL SET UP
POWER ON/OFF
TO TURN ON: Press and hold the power button in the lower right corner for 5 seconds,
until the screen turns on. The screen will be blank for a few seconds before
the Sunlighten logo appears. If left on, the tablet will go into sleep mode
and can be woken by touching anywhere on the screen.
TO TURN OFF: Press and hold the power button for 2 seconds and select “shutdown”
on the screen to turn off.
INITIAL SET UP
Uponrststartuporafactoryresetyouwillbepromptedtocongureinitialsettings:
•Temperature Unit Select: Fahrenheit or Celsius.
•Language preference.
•Usage Select: Residential or Commercial mode.
• SerialNumber:Locatedonthebackoftheoorpanelofsauna.
It is listed in the following format:
 (P)(ModelSize)(FirstLetterofWoodType)–(FourDigitIdentier)

7
OPERATING INSTRUCTIONS
7
SAUNA SETTINGS
In the SETTINGS tab, you will be able to adjust initial setup options.
•Change initial set-up options.
•Set up a wireless internet connection.
•Download latest software update.
•Watch basic usage tutorial.
•Adjust screen brightness.
•Select display mode
 (standardorsimplied).
•Select residential/commercial mode.
• AdjustNoticationring.
RESIDENTIAL/COMMERCIAL MODE
We recommend our commercial clients adjust the sauna settings from
Residential to Commercial mode to allow for a running time of up to 8 hours.
Please follow these steps to adjust the setting from Residential to Commercial mode:
•Go to the Settings tab
•Scroll down until you see “Choose mode of use”
•This is pre-set at Residential mode
•Press on the Residential tab 10 times to unlock this option.
•Select Commercial mode
DISPLAY MODE
The control panel is equipped with
two display modes that can be
changed in the settings tab. C
0°C
0°C 70°C

8
OPERATING INSTRUCTIONS
Wi-Fi
SRC
DURATION/TEMPERATURE SETTINGS
STANDARD: Rotate the time or temperature dials to your desired temperature.
SIMPLIFIED: Use the arrow buttons to adjust to your desired time or temperature.
ADJUST LIGHTS
•Select Adjust Lights tab.
•For exterior lights, select on/off.
•For interior lights, use the slider to adjust the light intensity.
WI-FI CONNECTION
•Select the Settings/Set-Up tab.
•Select “Set-up your wireless connection”.
•In the list of Wi-Fi Networks, select your network and enter your password if required.
•Please allow 30 seconds for the Wi-Fi to pair to your device.
•When successfully connected it should show “Connected” under the network name.
ENABLING SOUND VIA BLUETOOTH
Once the Wi-Fi connection is established, next it is vital to connect the display to the
stereo to enable sound production. This step is completed via Bluetooth.
•Turn on the radio by a quick press (or tap) of the SRC button
•Tap until F-AUX mode is displayed on the stereo
•On sauna display select Settings/Setup.
•Select Setup Your Wireless Connection.
•Select Bluetooth and press on button.
•Select Sunlighten on the screen.
•Once paired Bluetooth logo will appear on top right
corner of sauna display and also on stereo display.
•Press SRC button on Stereo until BT is displayed on screen.
•All sound from display will now be played through sauna stereo.
F-AUX mode

9
OPERATING INSTRUCTIONS
ADJUST DATE/TIME
•Select Settings/Setup tab.
•Select “Set-up your wireless connection”.
•Scroll down to Date and Time and press to select.
•Choose “Set date” or “Set time”.
UPDATE SOFTWARE
New saunas are delivered with the latest software and therefore an update is not
required.Ifyouencountertechnicaldifcultiesatanytime,pleasecontactourCustomer
Service team who will guide you through a software update.
SYSTEM RESET
The System Reset option will allow you to completely reset and erase all data on your
sauna (Full Reset,) or reset all software but keep your information (System Reset.) The
System Reboot option will restart the sauna and maintain all information and software.
CREATE NEW USER (OPTIONAL)
If you are tracking your progress with a biofeedback device, you should set up a User
prole.YourpersonaldatacanbeusedwithaBluetoothheartratemonitortoaccurately
calculate calories burned. If you do not intend to track biofeedback, you may continue
as a Guest User.
TO CREATE A NEW USER:
•Select the Health Tracking tab.
•Enter a user name, gender, date of birth, weight and height.
•Select “next” to return to home screen. User name will appear in the top left corner.

10
OPERATING INSTRUCTIONS
HEALTH PROGRAMS
The wellness programs are designed to emit the optimal blend of infrared wavelengths—
based on 56 clinical studies—to achieve the desired result.
TO BEGIN A PROGRAM:
•Select Health Program tab.
•Select the desired program from left side menu.
•Press start to begin preheating.
•When it reaches the desired temperature, press start to begin program.
PLEASE NOTE
Once you begin a program, the duration and temperature are not adjustable as they are
pre-programmed to deliver the best result. Preset programs range between 46–55°C.
The pre-heat function allows you to begin the program at your desired temperature.
To stop a program, return to home screen. Adjust the temperature for a prompt that
allows you to cancel or continue.
If you prefer an extremely hot experience, you can create a custom program,
see page 12, or use the quick mode function.

11
OPERATING INSTRUCTIONS
PROGRAM DURATION INFRARED USED
DETOXIFICATION 37 MINUTES FAR / MID
Starts at a high intensity to increases the body’s core temperature then reduces
to a low, comfortable intensity level. IR combination improves vascular access
owtoreachtoxinsatthecellularlevel.
RELAXATION 40 MINUTES FAR / MID / NEAR
Far, mid and near infrared rays induce deep relaxation as they relieve muscle tension
at a low, comfortable intensity promoting overall stress reduction with regular use.
ANTI AGEING 30 MINUTES FAR / NEAR
A low, constant intensity level penetrates tissue to help with various skin concerns.
NearIRLEDsimproveoverallskintone,elasticityandrmnesspromoting
anti-agingbenets.
CARDIOVASCULAR HEALTH 45 MINUTES FAR / MID / NEAR
Starts at a high intensity to increase heart rate and cardiac output then lowers
to sustain heart rate level. Circulation increases to promote healthy blood pressure.
WEIGHT LOSS 30 MINUTES MID / FAR
Starts at a high intensity to stimulate the cardiovascular system then reduces
to a medium level. As the body works to cool itself, there is an increase in heart rate,
cardiac output & metabolic rate similar to exercise.
PAIN RELIEF 30 MINUTES FAR / MID / NEAR
AnIRblendprovidesnaturalpainreliefbyreducinginammationandswelling
while near IR LEDs penetrate the tissue to promote cellular repair at a medium,
constant intensity level.
PRESET HEALTH PROGRAM GUIDE
Gives you full control of each heater, allowing you to maximize the IR power,
output and intensity of each sauna session.
CREATE PROGRAM YOUR CHOICE (1HR. MAX) YOUR CHOICE

12
OPERATING INSTRUCTIONS
CREATE A PROGRAM
•Select Create Program.
•Enter a name, duration and
set heaters to desired output.
•Heaters can be set individually in segments adding up to 60 minutes.
•The length of a segment indicates how long a heater setting will run.
EDIT OR DELETE A CUSTOM PROGRAM: If you have one or more custom programs,
the Delete and Edit options will be available. Select Delete or Edit, and a list of created
programs will appear with corresponding delete or edit buttons next to them.
ADJUST HEATER OUTPUT
•Select Adjust Heaters tab.
•Select the heater panel you wish to adjust (the panel being adjusted will be pink
to show which one is being adjusted).
•Press on/off to adjust Near infrared (not available on every heater panel).
•You can rotate the perspective in the sauna by swiping right or left.
•When adjustments are complete, press “Finished” to save the settings.
NEAR INFRARED
Cell Health / Immunity
Skin Purication
Pain Relief
MID INFRARED
Pain Relief
Improved Circulation
Weight Loss
FAR INFRARED
Weight Loss
Detoxication
Reduced Blood Pressure
QUICK INFRARED GUIDE FOR CUSTOMISATION
PLEASE NOTE
Adjusting the heaters during a health
program will stop the program and
switch to a Custom Program with the
applied heater settings. You will see
the custom program name in the top
right corner.

13
OPERATING INSTRUCTIONS
PLEASE NOTE THAT CUSTOM PROGRAMS CANNOT BE ADDED IN A SAUNA SCHEDULE.
SCHEDULING SAUNA SESSIONS
Use the Schedule feature to set a program to run automatically at a future time.
The Android panel can not be ‘Shutdown’ as the scheduler will not power on the tablet
to run a future program. Allow the screen to go in to low power mode, i.e., the screen
is blacked out but still has power to allow a future schedule to power on the tablet.
Select Health Program tab.
•Select Schedule Sauna Session tab
•Select the time block on calendar screen
•On the next screen, select additional days for session to run
•Select program and duration
•Please make sure your date and time is accurate on the home screen, or in settings,
in order for your scheduling to occur at the desired time.
•Please note, ‘Pre-heating’ will begin before the scheduled start time to ensure your
sauna is at the desired temperature when you enter the sauna.
To edit a Sauna Schedule, select the scheduled session. Press and hold for 3 seconds
for a prompt to modify schedule.

14
OPERATING INSTRUCTIONS
MEDIA APPS
Go to the Media/Applications tab to access Android apps.

15
OPERATING INSTRUCTIONS
•The control panel must be set to Standard Mode to access this section.
•The radio is recommended to be in Bluetooth mode to have optimal sound output
from the running application.
•With the latest Sunlighten App version on the ‘Settings and Setup Screen’
you will have the ability to download and install additional applications
as they are released for installation.
•To keep the Sunlighten App running optimally, third-party apps not included
with software updates are not available at this time.
HOW TO PLAY A MOVIE FROM USB FLASH DRIVE
UsingthefrontUSBport,pluginyourUSBashdriveandnavigatetoMedia/
Applications button. Select MXPlayer from the list.
HELP MENU
Visit this section for common FAQs for sauna use.
40°C
40°C
40°C

16
OPERATING INSTRUCTIONS
CHROMOTHERAPY
Your Solo System comes equipped with Chromotherapy lighting.
Chromotherapy is the science of using colours to adjust body vibrations to frequencies
thatresultinhealthandharmony.Eachcolourpossessesfrequenciesofaspecic
vibration, and each vibration is related to different physical symptoms. An imbalance of
any of those colours can manifest itself in physical and mental symptoms. Colour therapy
works on various energy points to help balance your body via the full spectrum of visible
light, each colour addressing a distinct need.
HOW TO USE CHROMOTHERAPY
Make sure your Chromotherapy remote has a battery in it. During installation of your
Solo domes, plug in the Chromotherapy light strip connector to the control box.
You will need to point the remote at the control box within a 90cm radius.
The lights will not operate otherwise.
NOTE: Make sure when using the Solo domes that the Chromotherapy wires are not
being pinched by the domes. This can cause the light strip to fail.
TURN LIGHTS ONTURN LIGHTS OFF
ADJUST INTENSITY OF LIGHTS
GREEN LIGHT
RED LIGHT BLUE LIGHT
WHITE LIGHT
LIGHTS TRANSITION SLOWLY
LIGHTS TRANSITION SMOOTHLY

17
OPERATING INSTRUCTIONS
COLOUR GUIDE
Activates & eliminates impurities from blood stream.
Acts as a cleanser, strengthening the veins &arteries.
Relaxes lymphatic system. Treats imammation/urinary illness.
Treats eye problems, cataracts, glaucoma, or nasal bleeds.
Lubricates joints. Treats infections, stress & nervous tension.
Stimulates muscle/skin cells, nerve & circulatory system.
Acts as a nerve relaxant.
Provides anti-infectious, anti-septic & regenerative stimulation.
Puries skin; helps with indigestion & body distress.
Strenghtens body & acts on internal tissues.
Activates the circulatory & nervous systems.
Burns fat; treats asthma & bronchitis.

18
OPERATING INSTRUCTIONS
WARM UP TIME & USAGE GUIDELINES
Our saunas are based on the infrared wavelength and not cabin temperature.
The following steps and hints are provided for your optimum usage:
STEP 1: Make sure your sauna is plugged into a dedicated circuit installed by
  yourelectrician.Whenturningsaunaonforthersttime,ensureeachheater
is active after a couple of minutes. If they are not, make sure connections are
securely paired from their initial wire feed coming from the power box under
the bench.
STEP 2: If not using a pre-set wellness program, set the desired temperature and
set time to 60 minutes.
STEP 3: Whenturningsaunaonforthersttime,ensureeachheaterisactiveaftera
couple of minutes. If they are not, make sure connections are securely paired
from their initial wire feed coming from the power box under the bench.
We recommend you enter the sauna at a lower temperature (eg: 40°C) than
your desired highest temperature (eg: 58°C). This will ensure a constant
emmission of infrared from the heaters.
STEP 4: Neverfullycovertheoorgrateandheaterwithanyobstructionthatwillnot
allow the heater to dissipate its heat.
TIPS FOR OPTIMAL USE
•Sauna requires a dedicated circuit and outlet for optimal performance.
 Thisshouldbeinstalledbyacertiedelectricianbeforeassembling.
•Use our Tri-Nature Cleaning products for periodic cleaning.
Available at https://shop.sunlighten.com.au/collections/natural-sauna-cleaners
• Ensureyoucleanyouroorheaterevery6monthsforresidentialuse,andevery
 monthforcommercialuse.Toclean,removeoorgrateandvacuumoutheaterarea.

19
OPERATING INSTRUCTIONS
SAUNA PROTOCOL
Follow this quick guide for the optimal sauna experience.
PRE SAUNA SESSION
•Hydrate with at least one glass of water to prepare your body for an increase
in core temperature.
•Pre-heat for a maximum of 30 minutes. Depending on room temperature,
your sauna will heat up a degree every 2 minutes.
•Use Bamboo Carbon Towels to absorb sweat during sessions.
SAUNA SESSION
•Begin your session when your sauna reaches 38°C.
•The optimal sauna experience occurs between 38°C and 58°C.
• HighheatisnotrequiredtoprovidethebenetsofInfrared.
The sauna is not designed to run at high heat 65°C+ for long periods.
•To get your body accustomed to infrared therapy, start with 10-15 minute
sessions at 38°C every other day.
•If comfortable with current settings, gradually increase towards 40 minute daily
sessions in the optimal temperature range.*
• Don’tbesurprisedifyoudon’tsweatduringtherstfewsessions.
•Sweating will increase with regular use, removing toxins and leaving you feeling
refreshed and rejuvenated.
•For added intensity, use Pure Sweat amplifying cream to increase sweating,
circulation and to boost results.
POST SAUNA SESSION
•Drink at least 750ml of water or electrolyte to rehydrate.
•Dry off with Bamboo Carbon Towel. Cool down naturally or with a refreshing shower.
•Every six months, clean wood and glass with our Tri-Nature Cleaning products.
Available at https://shop.sunlighten.com.au/collections/natural-sauna-cleaners

20
OPERATING INSTRUCTIONS
HEALTH & SAFETY
Ourinfraredsaunasoperatewiththesameefcacyinyourhomeasinamedical
facility. Like all professional equipment, you may put yourself at risk if you do not fully
understand how to use the sauna. Infrared sauna use as creating a cure for or treating any
disease is neither implied nor should be inferred. Drinking an electrolyte-replacing water
or a sports drink is strongly recommended before and after use.
IMPORTANT SAFEGUARDS
•Never sleep inside the sauna while it is on.
•Do not use harsh cleaning agents on the interior of the sauna.
•Do not stack or store objects on top of or inside the sauna.
•Do not use during an electrical storm, as there is a remote risk of shock.
•Altering or tampering with any electrical connections on the power supply is
dangerous and will void the warranty.
• DonotattemptarepairwithoutconsultingSunlightenrst.Unauthorisedrepair
attempts will void the warranty.
PRECAUTIONS
If any of the below apply to you, consult your physician prior to sauna use:
MEDICATIONS
Individuals who are using prescription drugs should seek the advice of their personal physician
since some medications may induce drowsiness, while others may affect heart rate, blood
pressure and circulation. Diuretics, barbiturates and beta-blockers may impair the body’s natural
heat loss mechanisms. Anticholinergics such as amitryptaline may inhibit sweating and can
predispose individuals to heat rash or to a lesser extent, heat stroke. Some over-the-counter drugs,
such as antihistamines, may also cause the body to be more prone to heat stroke.
CARDIOVASCULAR ISSUES, OBESITY OR DIABETES
Individuals suffering from obesity or with a medical history of heart disease, low or high blood
pressure, circulatory problems or diabetes should consult a physician prior to use. Heat stress
increasescardiacoutputandbloodowinanefforttotransferinternalbodyheattotheoutside
environment via the skin (perspiration) and respiratory system. This takes place primarily due to
major changes in the heart rate, which has the potential to increase by thirty (30) beats per minute
for each degree increase in core body temperature.