Sunlighten Solo System User manual

1
USER MANUAL
VERSION O3.12.2O21
Solo System

2
Congratulations!
You are now the owner of a Solo® portable sauna. With Sunlighten infrared light, you are
empowered to improve your quality of life. Follow our assembly instructions and
sauna protocol to begin your wellness journey with the very best in infrared therapy.
WARNING:
READ BEFORE OPERATING
Do not use this sauna to treat any health problems without consulting your physician.
Sunlighten, Inc. does not provide medical advice, education or treatment. Our information
should not be relied on in making decisions about your health. Always consult your physician
for medical advice.
sunlighten.com/contraindications
To reduce risk associated with hazardous voltage and re:
• Always keep SoloPad® on a heat-resistant, solid surface.
Do NOT place on hardwood oors or rugs.
• Unplug the sauna from electrical outlet before storage, or when not in use.
• Do not operate the unit if any cord or plug is damaged.
• If the sauna is not working properly, or an odor persists, immediately unplug the unit.
• Do not leave the sauna unattended while turned on or in use.

3
USER MANUAL
VERSION O1.O1.2O21
TABLE OF CONTENTS
INSTALLATION
Specifications ............................................................ 4
Parts Diagram ............................................................ 5
Unboxing Parts & Pieces ........................................... 6-9
Pad & Shell ................................................................. 7
Curtain & Neck Pad ................................................... 8
Plugs & Electrical ....................................................... 8-9
OPERATING INSTRUCTIONS
Solo Controls ............................................................. 10
SoloPad Controls ....................................................... 11
Chromotherapy .......................................................... 12
Basic Usage ................................................................ 14
SAUNA PROTOCOL ........................................................ 15
FAQ ................................................................................. 16
CARE & MAINTENANCE ........................................................ 17
HEALTH & SAFETY ................................................................... 18
WARRANTY ............................................................................... 19
RETURN POLICY ....................................................................... 20
A separate packet with assembly instructions is included with your sauna.
Solo System
USER MANUAL
VERSION O3.12.2O21

4
SPECIFICATIONS
NEMA 5-15P
USA / CAN
NEMA 5-15P
USA / CAN
SAFETY
Sunlighten has quality control measures in place at every step of the production process to ensure you have
the best product possible. We subject our designs to rigorous health and safety inspections, including third-
party tests and certications.
Every element of a Sunlighten sauna is designed with quality and safety in mind. SoloCarbon® heaters are
the most effective and safe infrared heaters on the market. Sunlighten saunas have met the strictest safety
standards for more than a decade. Our patented heater design has a 95-99% emissivity rating and cancels out
EMF to ultra-low levels. SoloCarbon heaters contain a proprietary blend of FDA-approved materials and are
heat-sealed to withstand temperatures above and beyond the operating temperature to ensure no unhealthy
gases are released during heating. Plus, extensive third-party testing has been conducted to ensure all of our
materials are safe and non-toxic.
The Solo System has been thoroughly tested and granted an acceptance label by an internationally recognized
testing facility. All temperature and timing control circuits have been designed and engineered to meet the
highest standards, with safety being a demanded requirement. The Solo System is UL/CUL certied and meets
or exceeds electrical safety standards of the U.S., Canada, Australia, New Zealand, and the EU.
COMPONENT LIST
1User Manual 1Solo Lower Dome
1Bamboo Carbon Curtain 1Solo Upper Dome
1Solo Control Box 1Solo Curtain
1Solo Pillow 1SoloPad
1Chromotherapy Remote 1SoloPad Controller
SOLO
Dimensions
(W x L x H)
69” x 28” x 18”
1,752.6mm x 711.2mm x 457.2mm
Weight 46 lbs. (21 kg)
U.S. Power 120V 1260W 10.5A
U.K. Power 230V 920W 3.99A
SOLOPAD
Dimensions
(W x L x H)
74” x 23.6” x 4”
1,879.6mm x 599.4mm x 101.6mm
Weight 13 lbs (6 kg)
U.S. Power 120V 300W 2.5A
U.K. Power 230V 280W 1.2A

5
SETUP INSTRUCTIONS
The Solo is a professional piece of equipment
designed to be a personal sauna. If, for any reason,
you feel nausea, dizziness, or other discomforts, or do
not feel in control while using the Solo, immediately
turn it off at the control box. Keep control box within
reach when using the Solo. Do not use near water.
Always use a grounded electrical receptacle. Infrared
waves are most effective when they can contact bare
skin, making it most effective to get undressed before
using the Solo System.

6
UNBOXING GUIDE
PARTS & PIECES
Your Solo System will ship packaged in a
larger outer box to protect it from
damage in transit, containing a smaller box.
This will include the two dome sections, a
pillow pad and electronics, nested inside
the smaller dome.
Remove your small items and separate
them from the larger materials in
preparation for the assembly process.
To most easily extract your dome
sections, tip the box on its side and pull
them with one hand to slide both out,
creating resistance by pushing the box
with your other hand.

7
PAD & SHELL
Determine which outlet you’d like to
provide your Solo System power and its
placement in the room. If more than 8 feet
away, an extension cord may be used.
Remove your SoloPad from its plastic
wrapping, carefully also taking out the
SoloPad controller connected to the top
cushion.
When laying the pad on the ground, the
connecting fabric seam should always be
on the bottom of the cushion. You should
be able to see the lines of segmentation
from above.
Place the lower dome (the smaller of the
two) on the oor where you plan your feet
to be while lying on the pad. Insert the
narrow side of the pad into the lower Solo
dome with the upper cushions and
connected controller.
When correctly oriented, the controller
should be emerging from the pad where
your head will be when lying down.
Prepare to place your upper dome,
noting the Chromotherapy wire taped
to its side. Remove the tape from the
connector. The upper and lower domes
are attached using silver locking pins.
Align the larger, upper dome over the
lower dome to connect them, sliding it
forward as the locking pins make contact
with the base rail.
When getting in for use, you’ll want to
fully extend the upper dome, sliding it out
so that it becomes a canopy to the
upper portion of the SoloPad.

8
CURTAIN & NECK PAD
Your Solo curtain can be found rolled and taped to
the control box packaging. The label will read
‘Spungi bamboo carbon towels.’ It will attach to a
velcro strip inside the lip of the upper dome,
along its edge.
With the towel’s velcro strip facing you, start with
the middle, connecting it along the leading edge
and pressing down as you do so to secure the
attachment. Your head will lay outside the dome.
Unwrap your headrest from its bubble packaging
and place it at the head of the upper dome, gently
sliding it into the curtain.
PLUGS & ELECTRICAL
With your pad and domes positioned, unwrap the
SoloPad controller from its packaging. It will have
a Quality Control (QC) tag attached with your pad’s
number. Plug your pad controller into the outlet
and power on your SoloPad.
Unbox your control box, and nd it’s QC card
attached to the cord. Notice that the QC number
matches the QC code on the pad. The QC number
for your domes can also be found inside the
midsection of the upper dome. We recommend
placing it within reach on your right side when laying
down in the Solo System.

9
PLUGS & ELECTRICAL
(CONTINUED)
The main powering cable is 120 volts and goes
in the outlet. Unlike our cabin units, the Solo is
portable and doesn’t require a dedicated
electrical circuit.
The connector labeled ‘Upper US’ will plug into
the upper dome’s corresponding receptacle, and
‘Lower US’ will plug into the lower dome’s.
The remaining thin cord connects to the one
previously found taped to the side of the upper
dome.
Remove the tape and connect the two, aligning
the white dots painted on both ends before
sliding the black connection ring down the wire to
both and rotating fully to tighten around them.
Once properly connected, your Chromotherapy
light strip will activate, initializing on red by
default.

10
SOLO CONTROLS
Both of your Solo domes will be operated using the control box. This coconut shaped
control can control the intensity level and timer settings for each dome individually, allowing
you maximum control of your Solo experience. See the illustration below for the placement
of each feature button.
Sunlighten recommends working up to a 40-minute session once a day. Before engaging in
a longer session, please consult your physician.
1. Set the temperature setting on the control box. For your rst session, the Solo should
not be set at a temperature setting higher than ve (5). Warm up time will be from ve
to ten minutes, depending on temperature setting.
2. Time may be set for up to 12 hours at 1 hour intervals. It can also be set for up to 60
minutes at 5 minute intervals at the highest setting.
3. Temperature range is from 45-65° Celsius (113-149° Fahrenheit) and may be set at 3
levels: high, medium and low.
4. Set the timer on the control box. The maximum time that the Solo can be set for is 60
minutes.
* The number above UPPER is the level set for the upper dome.
The number above LOWER is the level set for the lower dome.

11
SOLOPAD CONTROLS
1. Unfold SoloPad onto a solid surface
2. Plug the SoloPad power cord into an outlet
3. Press the power button on the remote
4. Set the temperature intensity (0-9) by pressing the up and down arrows on the lower
half of the remote
5. Set time by pressing the time increase or decrease button until you reach the desired setting
6. Pressing the HR/MIN button will toggle the time between hours and minutes
7. Place SoloPad cover (if purchased) on the SoloPad. Alternatively, a large towel can be used.
Floor mat not included

12
SOLO CHROMOTHERAPY
Your Solo comes equipped with Chromotherapy lighting. Chromotherapy is the science
of using colors to adjust body vibrations to frequencies that result in health and harmony.
Each color possesses frequencies of a specic vibration, and each vibration is related
to different physical symptoms. Chromotherapy works on various energy points to help
your body re-establish its natural balance.
Chromotherapy Remote
Make sure your Chromotherapy remote has a battery in it. During installation of your
Solo domes, connect the Chromotherapy light strip that arches above the edge of the
upper dome to the control box. You will need to point the remote at the control box to
operate your lights.
NOTE: Make sure when using the Solo domes that the Chromotherapy wires are not
being pinched by the domes, and that the white dots on the wires are aligned.
12
4 6
12
7
8
9
10
11
3

13
COLOR GUIDE
* http://www.ncbi.nlm.nih.gov/pmc/articles/PMC1297510/

14
SOLO USAGE
It is now time to enter the Solo.
• Slide the Upper Dome back so that it is resting on top of the Lower Dome.
• Sit on the towel or SoloPad cover covering the SoloPad and gently pull the Upper
Dome back and over your body by gripping the frotal trim as you lie down.
• Be careful not to touch the heaters as they will feel hot to the touch.
• Position your head on the pillow so that you are comfortable. The pillow should be
positioned outside of the Solo domes.
• Close the drop curtain to retain the heat within the Solo. It is now time to relax
and enjoy the soothing heat.
• Do not position your head inside the Solo for prolonged periods of time.
• Remove immediately if feeling faint or dizzy.
When the session is over, the Solo heater output will stop.
• Push back the upper dome and exit the Solo.
• Turn off the controller.
• The Solo System will cause you to sweat profusely. Taking a shower after each
session will remove the perspiration from your skin and add to the cleansing
feeling that is felt when using the Solo.
• Dry with a fresh clean towel if no showering facilities are available.
• At the end of use, remove all towels from inside the Solo.
• Fully extend the domes and let them cool down.
• Do not collapse the two domes until after they are completely cool.
• After use, the SoloPad and pillow should be wiped down using damp, soapy water.
• Use a clean towel to dry all surfaces.
• Fresh towels should be used when enjoying your sessions in the Solo.

15
SAUNA PROTOCOL
Follow this quick guide for the optimal sauna experience.
PRE SAUNA SESSION
• Hydrate with at least 8 oz. of water to prepare your body for an increase in
core temperature.
• Pre-heat for approx. 30 minutes. Increase pre-heat time to reach higher
temperatures.
• Have a towel nearby to dry off after your session.
SAUNA SESSIONS
• To get your body accustomed to infrared therapy, start with 10-15 minute
sessions at 100°F every other day.
• Gradually increase towards 40-minute daily sessions.
• Don’t be surprised if you don’t sweat during the rst few sessions. Sweating will
increase with regular use, removing toxins and leaving you feeling refreshed and
rejuvenated.
• For added intensity, use Pure Sweat amplifying cream to increase sweating,
circulation and to boost results.
POST SAUNA SESSION
• Drink at least 24 oz. of water or electrolyte to rehydrate.
• Dry off with a towel.
• Cool down naturally or with a refreshing shower.

16
FREQUENTLY ASKED QUESTIONS
How long can I use it for each day?
We suggest using up to 40 minutes per day. It makes no difference whether you use during the day
or at night.
What micron does the heater put out?
The sauna puts out a micron range of 4 - 20 microns.
What is the best temperature to use my sauna?
We recommend starting at a lower temperature of 100º F and increasing temperature gradually in
later sessions, if you still feel comfortable. Everyone has different preferences and tolerances for heat.
The most important thing is to listen to your body.
What is the heater made of?
The heater is made of organic black carbon that is rst cut into pliable sheets. Then electrical heater
wiring is added.
How much will the sauna cost me to run a month?
The sauna runs on similar wattage as a blow dryer and will cost little to run monthly.
Can I use the sauna every day?
Yes. We suggest drinking increased amounts of water to keep yourself hydrated. As long as you feel
ne, use the sauna daily and enjoy.
If I do use it every day, what else do I have to do?
Just drink plenty of uids to replace what you will be loosing with everyday usage. If you like, take a
warm shower to help accelerate the sweat glands opening to be even more refreshed afterward.
Are the EMF levels safe?
Yes. SoloCarbon panels are 100% quality controlled by Sunlighten to ensure the safety and
effectiveness of each individual heater. Our proprietary heater design virtually eliminates EMF
(an average of less than 3mg) and steel conduit electrical shielding making your sauna as safe as
possible.
How long does it take for my sauna to warm up?
Set the temperature controls to 60 minutes and 150° F. Allow the sauna to warm up for 15 - 20
minutes at which time it should be approximately 100° F. If placed outside, the sauna may require
additional time to warm up, depending upon weather conditions. If you prefer the sauna hotter, let it
warm up longer. Drink plenty of water - at least 8 oz.
For more FAQ’s please visit:
sunlighten.com/customer-care/

17
CARE & MAINTENANCE
SOLO
• Unplug the sauna after each use.
• Store the sauna in a cool, dry place.
SOLOPAD
• Cover (not included). Bamboo carbon is recommended because the material
emits infrared for full exposure. It is also naturally anti-bacterial, anti-fungal and
deodorizing.
• The outer material is made from water resistant, breathable polyester. This
provides maximum comfort for the user, as the skin will not stick to the surface
when wet.
• Unplug the power cord from the wall after each use.
• When unplugged, SoloPad may be wiped down with a damp cloth or an all
natural disinfectant, being sure not to get the power cords wet. Sunlighten
Natural Cleaner is an effective, natural and non-toxic cleaner that can be used
on the SoloPad.
• The control unit may be disconnected from the pad and both may be placed in
the original packaging for storage in a cool place.

18
HEALTH & SAFETY
Our infrared saunas operate with the same efcacy in your home as in a medical
facility. Like all professional equipment, you may put yourself at risk if you do not
fully understand how to use the sauna. Infrared sauna use as creating a cure for or
treating any disease is neither implied nor should be inferred. Drinking an electrolyte-
replacing water or a sports drink is strongly recommended before and after use.
IMPORTANT SAFEGUARDS
• Never sleep inside the sauna while it is on.
• Do not use harsh cleaning agents on the interior of the sauna.
• Do not stack or store objects on top of or inside the sauna.
• Do not use during an electrical storm, as there is a remote risk of shock.
• Altering or tampering with any electrical connections on the power supply is
dangerous and will void the warranty.
• Do not attempt a repair without consulting Sunlighten rst. Unauthorized repair
attempts will void the warranty.
PRECAUTIONS
Please review sunlighten.com/contraindications. If any of the listed
contraindications apply to you, please consult your physician prior to use.

19
WARRANTY
US / CANADA
Residential:
Limited lifetime (7 years) on cabinetry and heaters; 3 years on controls & SoloPad; 1 year
on heater fabric and SoloPad memory foam.*
Commercial:
5 years on heaters; 1 year on controls, heater fabric, SoloPad cover and memory foam*
*Limited Lifetime Warranty covers normal use for the lifetime of the product which is
dened as 5-7 years. Warranty is limited to replacement parts only and does not include
costs of freight for parts shipped past 90 days from the date of receipt of goods.
The cost of labor and/or service technicians is not included.
Sunlighten warrants the sauna to be free of defects in material and workmanship.
This warranty extends only to the original retail or wholesale purchaser of the sauna and
terminated upon transfer of ownership. The sauna must be purchased and used within
one year of the manufactured date. Freight charges to and from the customer are the
responsibility of the customer. This includes freight charges for parts shipped to enable
the services of the sauna.
This warranty is void if the sauna has been altered, misused, abused or exposed to water.
Such instances shall include operation or maintenance of the sauna in deviation to the
published instructions. The warranty extends only to the manufacturing defects and does
not cover the damages resulting from mishandling of the product by the owner.
Sunlighten Corp. shall not be liable for the loss of use of the sauna or other incidental or
consequential damages. Under no circumstances shall Sunlighten Corp. or any of its
representatives be held liable for injury to any persons or damages to any properties.
Specications are subject to change without notice.
ATTENTION:
Shipping damage must be notated on the Bill of Lading (BOL). Sunlighten must be notied
of any damage to your sauna within three (3) business days of signing the BOL. Failure
to notify Sunlighten within the established time frame will result in the owner taking full
responsibility for cost of ALL REPLACEMENT PARTS including shipping and handling fees.

20
The ETL Listed Mark is proof of product compliance (electrical,
gas and other safety standards) to North American safety
standards. Authorities Having Jurisdiction (AHJ’s) in 50 states
and Canada and retailers accept the ETL Listed Mark as proof of
product safety.
ETL SAFETY CERTIFIED
RETURN POLICY
Except for custom orders, Buyer may cancel and return the Goods to Seller, subject to the terms
and conditions of this document, if Buyer provides written notice to Seller within thirty (30) days of
Buyer’s receipt of the Goods that Buyer does not accept the Goods. View our return policy online for
customers who purchase directly from Sunlighten.
SHIPPING & HANDLING FEE:
All cancelled or returned goods shall be subject to shipping costs (to and from) and handling fees in
the event a buyer cancels an order after ve (5) days of such order being placed with seller.