Sunny Health & Fitness SF-RW522074 User manual

0
WOODEN WATER ROWING MACHINE
SF-RW522074
USER MANUAL
IMPORTANT! Please retain owner’s manual for maintenance and adjustment instructions. Your
satisfaction is very important to us, PLEASE DO NOT RETURN UNTIL YOU HAVE CONTACTED
US:[email protected] or 1- 877 - 90SUNNY (877-907-8669).

1
IMPORTANT SAFETY INFORMATION
We thank you for choosing our product. To ensure your safety and health, please use this equipment
correctly. It is important to read this entire manual before assembling and using the equipment. Safe and
effective use can only be achieved if the equipment is assembled, maintained and used properly. It is
your responsibility to ensure that all users of the equipment are informed of all warnings and
precautions.
1. Before starting any exercise program, you should consult your physician to determine if you have any
medical or physical conditions that could put your health and safety at risk, or prevent you from using
the equipment properly. Your physician’s advice is essential if you are taking medication that affects
your heart rate, blood pressure or cholesterol level.
2. Be aware of your body’s signals. Incorrect or excessive exercise can damage your health. Stop
exercising if you experience any of the following symptoms: pain, tightness in your chest, irregular
heartbeat, shortness of breath, lightheadedness, dizziness or feelings of nausea. If you do
experience any of these conditions, you should consult your physician before continuing with your
exercise program.
3. Keep children and pets away from the equipment. The equipment is designed for adult use only.
4. Use the equipment on a solid, flat level surface with a protective cover for your floor or carpet. To
ensure safety, the equipment should have at least 2 feet (60 cm) of free space all around it.
5. Ensure that all nuts and bolts are securely tightened before using the equipment. The safety of the
equipment can only be maintained if it is regularly examined for damage and/or wear and tear.
6. Always use the equipment as indicated. If you find any defective components while assembling or
checking the equipment, or if you hear any unusual noises coming from the equipment during
exercise, discontinue use of the equipment immediately and do not use until the problem has been
rectified.
7. Wear suitable clothing while using the equipment. Avoid wearing loose clothing that may become
entangled in the equipment.
8. Do not place fingers or objects into the moving parts of the equipment.
9. The maximum weight capacity of this unit is 300 pounds (135 kgs).
10. The equipment is not suitable for therapeutic use.
11. To avoid bodily injury and/or damage to the product or property, proper lifting and moving is required.
12. Your product is intended for use in cool, dry conditions. You should avoid storage in extreme cold, hot
or damp areas as this may lead to corrosion and other related problems.
13. This equipment is designed for indoor and home use only. It is not intended for commercial use.

2
PRE-ASSEMBLY CHECK LIST
A 54 C
D82 87
50 E
No.
Description
Spec.
Qty.
A
Main Frame
1
54
Pumping Siphon
1
C
AAA batteries
2
D
User Manual
1
82
Allen Wrench
1
87
Water Purification
1
50
Seat
1
E
Thank You Card
1

3
ASSEMBLY INSTRUCTIONS
We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at sup[email protected] or 1-877-90SUNNY (877-
907-8669).
12
12
2
3
12
2
4
3
#82 30*80*5 S5 1PC
50
60 60
4
60
4
43
43
2
3
STEP 1:
Take out the Main Frame (No. A) from
the carton and stand the product on its
front end. Lift Rear Connecting Plate
(No. 12) up, shown as Fig A.
Hold on to Rear Connecting Plate (No.
12) and slowly pull the Rear Left Rail
and Rear Right Rail (No. 3 & No. 2)
outward in the direction of arrow to
prevent hand clamping (see Fig B) until
the rower is shown as Fig C.
STEP 2:
Remove the 2 preassembled Seat
Cushion Stops (No. 43) and 2 Screws
(No. 60) at the Rear Left Rail and Rear
Right Rail (No. 3 & No. 2), slide the
Seat (No. 50) into the middle of Rear
Left Rail and Rear Right Rail (No. 3 &
No. 2), and then fix the 2 Seat Cushion
Stops (No. 43) on the Rear Left Rail
and Rear Right Rail (No. 3 & No. 2)
with 2 Screws (No. 60). Tighten with
Allen Wrench (No. 82).
The assembly is complete!
Fig.A
Fig.B
Fig.C

4
HOW TO FILL AND EMPTY THE TANK
1. Remove the Fill Plug (No. 29) from the Upper Tank Cover (No. 20).
2. To fill the tank with water, refer to Fig. A. Insert the Pumping Siphon (No. 54) into the tank, then
use the Pumping Siphon (No. 54) and a bucket to fill the tank. Use the water level gauge on the
side of the tank to measure desired water level in the tank.
3. To empty the tank, refer to Fig. B. Place a bucket next to the rower, and use the Pumping Siphon
(No. 54) to pump out the water from the tank into the bucket.
4. Insert the Fill Plug (No. 29) into the Upper Tank Cover (No. 20). Wipe excess water off the frame.
NOTE:
Fill the tank only with tap water. Add 1 water purification tablet (1 packet is included). Never use
pool chlorine or chlorine bleach. This will damage the tank and void the warranty.
Add a water purification tablet every 6 months or as needed. If water remains cloudy, replace the
water in the tank.
Do not consume the tank water. Dispose of the water after pumping it out from the tank.
WATER LEVEL
See Fig. A. The water level gauge is on the side of the tank. The maximum fill level is 6. Never
fill over this limit. Filling the tank over this limit will void the warranty.
The resistance depends on the water level in the tank. Water level 1 is the lowest resistance.
Level 6 is the highest resistance.
1
2
3
4
5
6MAX FILL
MIN. FILL
RESIS.
LEVEL
WATER LEVEL
R E S I S T A N C E
54
29
54
29
20 20
Fig.A
Fig.B

5
BATTERY INSTALLATION & REPLACEMENT
83
C
83-1
BATTERY INSTALLATION:
1. Take out 2 AAA Batteries from the PE bag.
2. Press down on the buckle of battery cover on the back of the Meter (No. 83), then remove
battery cover.
3. Install 2 AAA Batteries into the battery case on the back of the Meter (No. 83). Pay attention to
the battery + and – poles before installing.
4. Press down on the buckle of battery cover, then put the battery cover back to the back of the
Meter (No. 83).
The installation is complete!
BATTERY REPLACEMENT:
1. Press down on the buckle of battery cover on the back of the Meter (No. 83), then remove
battery cover.
2. Remove the 2 old AAA batteries in the battery case and install 2 new AAA batteries into the
battery case on the back of the Meter (No. 83). Pay attention to the battery + and – poles before
installing.
3. Press down on the buckle of battery cover, then put the battery cover back to the back of the
Meter (No. 83).
The replacement is complete!
NOTE: Always change both batteries at the same time. Do not mix battery types and do not mix old
and new batteries. Dispose batteries according to your state and regional guidelines.

6
ADJUSTMENTS GUIDE
MOVING THE ROWER
To move the rower, lift up the Rail Connecting Plate (No. 4) until the Transportation
Wheels (No. 34) on the front touch the ground. With the Transportation Wheels (No. 34)
on the ground, you can transport the rower to the desired location with ease.
You can also move the rower by push the Rear Left Rail and Rear Right Rail (No. 3 &
No. 2), when the product is folded.
WARNING! Do not stand the rowing boat or
lift the rail without folding and moving the
rowing boat to prevent the rail or rowing boat
from falling down and hurting people!
34
2/3
B
50
34
2/3

7
ADJUSTMENTS GUIDE
50
4
12
3
12
34 34 35
2
2/3
12
35
2/3
12
12
34 34
FOLDING OPERATION:
When not in use, you can save space by storing the rower vertically. Hold the Rear Connecting Plate (No. 12) and slowly lift
the Rowing Machine up in the direction of the arrow A to preve nt hands from getting caught. Push the Rear Left Rail and Rear
Right Rail (No. 3 & No. 2) in the direction of the arrow B. Press the Universal Wheel (No. 35) brake to fix. (Shown as Fig A)
If not using the rower for more than a month, empty the tank before storing.
OPEN OPERATION:
Hold on Rear Connecting Plate (No. 12) and Rear Left Rail and Rear Right Rail (No. 3 & No. 2), and slowly pull outward in the
direction of arrow C to prevent han d clamping. (Shown as Fig B)
CAUTION!
Move the Seat (No. 50) to the end of Rear Left Rail
and Rear Right Rail (No. 3 & No. 2) first or it will
glide down when raising the rower up!
48
33
A
B
B
PEDAL ADJUSTMENT
The Pedal Strap (No. 48) and Adjusting
Pedals (No. 33) is adjustable and can be
personalized to fit the user’s foot size. Secure
your feet firmly to the pedals before using the
rower.
Fig.B
Fig.A
A
B
C
2/3

8
EXERCISE METER
■KEY FUNCTIONS：
Pressing the MODE key to select and lock on a function for following sequence:
SCANTIMECOUNTDISTANCE (DIST)CALORIES (CAL)TOTAL COUNT (TOT) 
SPMT/500M SCAN
Pressing and hold the MODE key with 3 seconds to reset the value to zero (without TOT).
■SLEEP MODE：
The system turns on when the MODE key is pressed and system sensed a signal input from the
sensor.
The system turns off automatically when the sensor has no signal input or no key are pressed for
approximately 4 minutes.
■FUNCTIONS:
SCAN: Display changes according to the next diagram every 6 seconds.
COUNT: The current count with starting exercise.
DISTANCE (DIST): The current distance with starting exercise.
TIME: The total working times with starting exercise.
TOTAL COUNT (TOT): The total count which this function is refers to from battery capacity period
runs.
CALORIES (CAL): The calorie burned with starting exercise.
SPM: Number of strokes per minute, indicating the stroke speed during exercise.
T/500M: The time for 500 meters during exercise
■BATTERY INSTALLATION & REPLACEMENT
SPECIFICA
TION
SCAN
6S
TIME
0分:00 秒- 99M:59S
COUNT
0~9999
DISTANCE (DIST)
0~9999 M
TOTAL COUNT (TOT)
0~9999
CALORIES (CAL)
0.0~999.9 KCAL
SPM
0~299
BATTYERY
AAA * 2
OPERATING TEMPERATURE
0~40℃(32℉-104℉)
STORAGE TEMPERATURE
-10~60℃(14℉-140℉)

9
APP CONNECTION:
1. Scan the QR code below to download the SunnyFit app onto your mobile device.
2. If this is your first time using the SunnyFit app, follow the in-app instructions to register for your
free SunnyFit account and log in.
3. Ensure that the Bluetooth function is turned on from your mobile device.
4. To connect the equipment to the SunnyFit app:
a. From the “Workout” tab, press on the “Search” button to search for your equipment.
b. Once your equipment appears on the list, tap the “Select” button to confirm.
c. NOTE: If your equipment does not appear on the "Searching for Equipment" list, check the
EXERCISE METER on your equipment to ensure that it is not in sleep mode and your
phone's Bluetooth function is on, then tap "Retry" to search again.
d. Once your equipment shows up on the “Workout” tab as “Currently Selected”, your
equipment is now ready to display, track, and record your equipment’s workout stats on the
app!
5. If you are unable to replicate these steps, or have any other issues with the SunnyFit app,
please contact SunnyFit support at sup[email protected], or use the in-app “Contact Us” form
to request support (“Me” tab -> “Contact Us”).
Version 1.0