Sunnydaze Decor AGR-379 User manual

CRG914 01/2023
WINE CABINET WITH DRAWERS
AGR-379
Carefully review assembly and care instructions before using this product. Save this document for future reference.

Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
[e-mail], or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
HELPFUL HINTS
Sunnydaze Decor advises reviewing this manual fully, and assembling the unit soon after purchase.
Check that all parts are accounted for and familiarize yourself with the assembly before beginning.

Page 1 / 12
2-PERSON
ASSEMBLY
RECOMMENDED
SCAN THIS CODE
WITH YOUR
SMARTPHONE
TO VIEW OUR
ASSEMBLY VIDEO
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
Save the packing slip.

CRG914 01/2023
INTRODUCTION
Instrucciones
Instructions


Read the manual carefully to ensure you fully understand
all use, care, assembly, and safety information.
Read this manual carefully and
follow the assembly instructions
in the order listed. Pay close
attention to assembly drawings.
Regularly clean with a clean
microber cloth to prevent dust
accumulation.
Do not paint the unit.
Do not use abrasive materials or
cleaners to clean the furniture.
Indoor use only.
Do not expose the furniture to
heat or humidity.
When cleaning nearby the
furniture, do not allow contact
with water or cleaners as it may
deteriorate the furniture.
Do not allow metal components
to come in contact with water or
cleaners as it may cause rust and
staining.
Assemble on a soft, at, clean, and
dry surface.
Use a soft, protective barrier when
assembling the furniture.
TIP: Use the box carton as a
protective layer to separate and
protect the parts from scratches and
other damage during assembly.
Do not push or drag furniture as
doing so may damage the unit.
Only move furniture when it is empty.
Always ask for help when moving
furniture.
Avoid Accidents - Do not climb, sit
or stand on the furniture.
Do not allow children to play on or
inside the furniture.
Keep sharp objects away as they
may scratch or damage the unit.
Do not use the furniture as a writing
surface without a padded barrier.
NOTICE:
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage
or loss, whether direct or indirect, or incidental, resulting from the incorrect attachment, improper use,

Page 2 / 12

CRG914 01/2023
  
AWood Dowel 68
BM4.5x28mm Pan Screw 36
CM3.5x30mm Flat Screw 16
DHandle Set 2
EM3.5x25mm Pan Screw 14
FM3x14mm Flat Screw 12
GTack 8
HConnector 10
JDrawer Slide 4
KM4x8mm Bolt 4
YWall Anchor Kit 1
Z8x8mm Nail 26
COMPONENTS
CHOKING HAZARD — This item contains small
parts that can be swallowed. Keep children and pets
away during assembly.
WARNING
  
01 Top 1
02 Left Side Panel 1
03 Right Side Panel 1
04 Right Stile 1
05 Left Stile 1
06 Back Bottle Rail 4
07 Bottom 1
08 Front Base Bottle Rail 1
09 Front Bottle Rail 3
10 Side Trim Board (L/R) 2
11 Front Trim Board 1
12 Drawer Face 2
13 Drawer Side (L/R) 4
14 Drawer Rail Support 1
15 Horizontal Face Frame 2
16 Vertical Face Frame 1
17 Backing Board 2
18 Divider 1
20 Outside Drawer Rail (L/R) 2
21 Center Drawer Rail 1
22 Drawer Bottom 2
23 Drawer Back 2
Page 3 / 12
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
Save the packing slip.
(not included)
Phillips
Screwdriver
Regular
Screwdriver
Rubber Mallet
Hammer
Power Drill,
6mm Drill Bit,
2mm Drill Bit
(only use for installing wall anchor kit)

CRG914 01/2023
IMPORTANT: Take care not to over-tighten screws as doing so may crack the wood or strip the screw hole, causing a weak connection and reduced stability.
ASSEMBLY
Carefully review all steps and fully understand assembly before beginning.
STEP 1
02: 1
03: 1
07: 1
A: 14
STEP 2
H: 10
TIP: Install connectors by gently tapping them
into the designated holes using a rubber mallet.
Page 4 / 12
Locate and lay out
Left Side Panel (02),
Right Side Panel (03) and Bottom (07).
Install Wood Dowels (A) as noted below,
and shown in the diagrams above:
Left Side Panel (02), install ve Wood Dowels (A).
Right Side Panel (03), install ve Wood Dowels (A).
Bottom (07), install four Wood Dowels (A).
With the angled edge facing the inside of the panel, install ve
Connectors (H) into Left Side Panel (02) and Right Side Panel (03).
STEP 3
14: 1
16: 1
20: 2
21: 1
A: 14
Locate and lay out Drawer Rail Support (14), Vertical Face Frame (16), two Outside Drawer Rails (20) and Center
Drawer Rail (21).
Install Wood Dowels (A) as noted below, and shown in the diagrams above:
Drawer Rail Support (14), install two Wood Dowels (A).
Vertical Face Frame (16), install four Wood Dowels (A).
Outside Drawer Rail (20), install two Wood Dowels (A). Repeat with the remaining rail.
Center Drawer Rail (21), install four Wood Dowels (A).
Set components aside, label if necessary.

CRG914 01/2023
STEP 4
06: 4
08: 1
09: 3
15: 2
A: 40
STEP 5
E: 2
Page 5 / 12
Install four Wood Dowels (A) into four Back Bottle Rails (06), Front Base Bottle Rail (08), three Front Bottle Rails (09),
and two Horizontal Face Frames (15), as shown.
Set components aside, label if necessary.
With the angled mounting holes facing upward, align two Horizontal Face Frames (15) and Vertical Face Frame (16).
Secure using two M3.5x25mm Pan Screws (E).
NOTE: Vertical Face Frame (16) is marked with a + and - symbol to indicate there is a lesser and greater distance
between the dowel mounting holes and the edges; this will be important during Step 7.
Identify the two indents on Center Drawer Rail (21), the indent with the longer distance between the indent and the
edge of the rail must be installed toward Drawer Rail Support (14).
Ensuring the angled mounting holes face outward as shown in the diagram, align Center Drawer Rail (21) with
Drawer Rail Support (14). Secure using one M4.5x28mm Pan Screw (B).
IMPORTANT:
Ensure these components are installed exactly as shown.
These pieces must be installed in the correct direction for
drawer slide installation to be performed as intended.
STEP 6
B: 1

CRG914 01/2023
STEP 7
04: 1
05: 1
E: 12
STEP 8
B: 6
Page 6 / 12
IMPORTANT:
Ensure components are installed in the correct
direction, as shown in the diagram.
IMPORTANT:
Ensure the stiles are
installed as indicated
in the drawings.
With the angled mounting holes facing upward, lay out the assembled face frame (15,16,15), three Front Bottle Rails
(09), Front Base Bottle Rail (08), Right Stile (04), and Left Stile (05), as shown above.
NOTE: Vertical Face Frame (16) is marked with a + and - symbol to indicate there is a lesser and greater distance
between the dowel mounting holes and the edges, the minus (-) side must be on top.
NOTE: The bottom of the stiles have a gap between the dowel mounting holes and the edge.
After components are aligned as shown above, use twelve M3.5x25mm Pan Screws (E) to secure the stiles.
Set assembled front frame aside.
Ensuring the angled mounting holes face the back and the wine bottle grooves face the top, align four Back Bottle
Rails (06) with Left Side Panel (02) and secure using four M4.5x28mm Pan Screws (B).
With the angled mounting holes facing the bottom, align Bottom (07) with the side panel and secure using two
M4.5x28mm Pan Screws (B).

CRG914 01/2023
STEP 9
B: 6
STEP 10
B: 6
Page 7 / 12
Align Right Side Panel (03) with the rails and
bottom and secure using six M4.5x28mm Pan
Screws (B).
Align the assembled front frame (from Step 7)
with the front of the unit and secure using six
M4.5x28mm Pan Screws (B).
STEP 11
01: 1
B: 4
Lay Top (01) on a at, clean surface.
Align the assembled components with Top (01)
and secure using four M4.5x28mm Pan Screws
(B).
IMPORTANT: Ensure the nished edge of the top in
installed toward the front of the cabinet.

CRG914 01/2023
STEP 12
B: 6
STEP 13
10: 2
11: 1
B: 7
Page 8 / 12
IMPORTANT: Ensure the drawer rails are
installed in the correct direction, as indicated
in the diagram.
Identify the two indents on Outside Drawer Rails (20), the indent with the shortest distance between the indent and
the edge of the rail must be installed toward the front of the cabinet.
Secure one Drawer Rail (20) to each side of the cabinet using two M4.5x28mm Pan Screws (B) for each rail.
Align the center drawer rail with the vertical face frame and the top, and secure using two M4.5x28mm Pan Screws (B).
Assistance is recommended for this step.
Align two Side Trim Boards (10) with the bottom of the unit, as shown. From the inside of the side panels, secure each
trim board using two M4.5x28mm Pan Screws (B).
Align Front Trim Board (11) with the bottom, front of the unit. Secure the trim board to the bottom frame using three
M4.5x28mm Pan Screws (B).
NOTE: Have an assistant rmly hold the trim boards in place to ensure they remain ush with the unit while hardware is secured.

CRG914 01/2023
STEP 14
F: 12
J: 4
STEP 15
12: 2
13: 4
22: 2
23: 2
C: 16
D: 2
Page 9 / 12
IMPORTANT:
Ensure the drawer slide remains centered
on the drawer rail; if the slides are not
centered, the drawer will be crooked.
Push the front of one Drawer Slide (J) backward. Align the 3rd round hole on the front of the drawer slide with the
front indent on the drawer rail and secure using one M3.5x14mm Flat Screw (F).
Push the drawer slide forward to expose the holes on the back of the drawer slide, align the backside indent with the
4th round hole from the back of the slide. Ensuring the slide is centered on the rail, secure the 4th hole, then the 1st
round hole using M3.5x14mm Flat Screws (F).
Repeat this process to secure the remaining three drawer slides.
Ensuring the inside grooves align, secure two Drawer Sides (13) to Drawer Face (12) using four M3.5x30mm Flat
Screws (C).
Slide Drawer Bottom (22) into the grooves.
Align and secure Drawer Back (23) to the drawer sides using four M3.5x30mm Flat Screws (C).
Ensuring the handle and handle plate remain straight, install one Handle Set (D) onto the drawer face, as shown.
Repeat this step to assemble the remaining drawer.

CRG914 01/2023
STEP 16
G: 8
K: 4
Page 10 / 12
Extend the drawer slides
out the front of the cabinet.
Align the rst small hole on the drawer slides with the pre-drilled hole on the front of the drawer sides.
From the inside of the drawer, secure the drawer to the slides using M4x8mm Bolts (K), as shown.
NOTE: The drawer sides have a second pre-drilled hole toward the back of the drawer, this hole is a result of the manufacturing
process and is not intended for securing the drawer to the slide.
For even spacing, carefully measure and install eight Tacks (G) as indicated above.
30 mm
30 mm
30 mm
25 mm
40 mm
45 mm
HELPFUL MEASURING HACK
To help ensure tacks are evenly spaced, we developed a hack to make this step easier.
Grab a blank white piece of paper or tracing paper, a writing utensil, a ruler and scissors.
The blocks below are sized to the dimensions noted in the above diagrams.
Place the blank piece of paper over the blocks below. Use a writing utensil to mark the corner of each block.
Use a ruler to connect the dots of each block. Write the size inside the block and cut them out.
Align the cutout with the designated corner (shown above).
Use the sharp end of one of the tacks to make a small indent at inside corner of cutout.
After tack placement has been marked, install tacks using a rubber mallet.