Sunricher SR-1009FAWi User manual

Feature
Work with different remotes: single color, CCT, RGB/RGBW
Work with directly with iPhone, Android
Parameter
Part No. Input Voltage Remarks
Current
SR-1009FAWi 12-36VDC Constant voltage
4x(60-180)W
4x5A
Output
SR-1009EAWi 12-36VDC Constant voltage
4x(96-288)W4x8A
Control RGBW, RGB, CC-CW, Single color LED lighting.
SR-1009FA3Wi 12-36VDC Constant current
4x(4.2-12.6)W
4x350mA
SR-1009FA7Wi 12-36VDC Constant current
4x(8.4-25.2)W4x700mA
Wiring diagram
RGBW LED strip
PRI:
Uin=12-36VDC
Iin=20.5A
SEC:
Uout=4x(12-36)VDC
Iout=4x5A
Pout=4x(60-180)W
SR-1009FAWi
12-36VDC
W
TEMP RANGE:-20℃-+50℃
Learning
Switch
Reset
Switch
1. pair controller with iPhone.
1.1: download the app “Easylighting”from apple store by gongfei.
2.1: After wiring well and power on the receiver SR-1009FAWI, then open your iPhone’s WiFi setting,
choose the name EASYLIGHTING_... > password: 0123456789
RF+WiFi controller SR-1009FAWi
12-36VDC
Important: If there is no“ EASYLIGHTING_...” network found, please hold Reset Switch button on 1009FAWi for 10 seconds.
then the “ EASYCOLOR_...” network will appear 5 seconds later.
XXXXXXXXXXX
XXXXXXXXXXX XXXXXXXXXXX

3.1: then open the app on your iPhone.“EasyLighting”
touch Room button
touch the top right corner, there is a green tick, meaning to choose room (zone)
1
2
3then touch Room again back to color wheel
4then short press the Learning Switch on SR-1009FAWi,
PRI:
Uin=12-36VDC
Iin=20.5A
SEC:
Uout=4x(12-36)VDC
Iout=4x5A
Pout=4x(60-180)W
SR-1009FAWi
12-36VDC
W
TEMP RANGE:-20℃-+50℃
Learning
Switch
Reset
Switch
and then immediately touch-rotate the color wheel on app.
Now the iPhone and controller is well paired. you can do the control now.