Sunricher SR-2202T1 US User manual

Wall mounted single color DMX512 Master
SR-2202T1(US)
Parameter
Installation
Remote
Part No. Operation Voltage Output Dimensions (mm)
Wiring diagram
Product Size
2 zone
Back lighting for finding in the dark
Italian/ Australian, US wall mounted size available as wel l.
Touch sensitive
Glass interface
SR-2202T1(US) 12-24VDC DMX512 Signal 75x120x29.1
D- GN D
Power Supply
12-24VDC
Vin D+
Power Supply
12-36VDC
LN
110V-230VAC
SR-2202T1(US)
GND
LN
110V-230VAC
D1 D1 D2 D 2
SR-2102 B
DMX 512 D eco de r
GND
whit e
D1 D1 D2 D 2
SR-2102 B
DMX 512 D eco de r
GND
whit e
D1 D1 D2 D 2
SR-2102 B
DMX 512 D eco de r
GND
whit e
Operation
After connect well with DMX decoders, please set the DMX
decoders address as below:
DMX decoder’s address 001 is controlled by Zone 1
DMX decoder’s address 005 is controlled by Zone 2
Zone 1 Zone 2
Short press on
Long press dim up
Short press off
Long press dim down
120.0
75.0
29.1
ISO 90 01：2 000
5

Warranty Agreement
1) We provide lifelong technical assistance with this product:
5-year warranty. We print date on every products, for example :1125 means year 2011,week 25.The
warranty is for free repair or replacement and covers manufacturing faults only.
For faults beyond the 3-year warranty we reserve the right to charge for time and parts.
2) Limited Warrenty
Any defects caused by wrong operation.
Any damages caused by unauthorized removal, maintenance, modifying, incorrect connection and
replacement of chips.
Any damages due to transportation, vibration etc. after purchase.
Any damages caused by earthquake, fire, lightning, pollution and abnormal voltage.
Any damages caused by negligence, inappropriate storing at high temperatures and humidity or near
harmful chemicals.
Product has been updated
3) Repair or replacement as provided under this warranty is the exclusive remedy to the customer.
Safety & Warnings
1) The product shall be installed and serviced by a qualified person.
2) IP20.Please avoid the sun and rain. When installed outdoors, please ensure it is mounted in a water proof
enclosure.
3) Always be sure to mount this unit in an area with proper ventilation to avoid overheating.
4) Please check if the output voltage of any LED power supplies used comply with the working voltage of the
product.
5) Never connect any cables while power is on and always assure correct connections to avoid short circuits
before switching on.
6)
7) For update information please consult your supplier.
Please ensure that the cable is secured tightly in the connector