Sunricher SR-2812BS User manual

Wall mounted RGB/W DMX512 controller
Parameter
Touch sensitive
Glass interface(White & Black)
Feature
SR-2812B
Control 1 zone,save up to 4 color
Part No. Operation Voltage DIMENSIONS
ø/h (mm)
OUTPUT
SR-2812B 12-24VDC 86x86x29.1
DMX512 Signal
Product Size
29.1
86.0
86.0
Installation
12-24VDC
Power Supply
Button introduction
Wiring diagram
D- GN D
Power Supply
12-24VDC
Vin D +
Power Supply
12-36VDC
LN
110V-230VAC
SR-2812B
GND
LN
110V-230VAC
D1 D1 D 2 D2
SR-2102B
DMX512 Decode r
GND
whi te
D1 D1 D 2 D2
SR-2102B
DMX512 Decode r
GND
whi te
D1 D1 D 2 D2
SR-2102B
DMX512 Decode r
GND
whi te
Color Wheel:
Touch to choose color
Brightness Color Running Button:
Short touch to start or Pause color
running mode;
Long touch to adjust speed (10 built-in
color running mode)
Switch: Short to
switch on/off
touch
Save Color:
Long Touch S1/S2/S3/S4 to save
your favorite colors
Short touch to choose the color R.G.B.W
Long touch to dim brightness of R.G.B.W
ISO 900 1：2000
5

Safety & Warnings
Warranty Agreement
1) The product shall be installed and serviced by a qualified person.
2) IP20.Please avoid the sun and rain. When installed outdoors, please ensure it is mounted in a water proof
enclosure.
3) Always be sure to mount this unit in an area with proper ventilation to avoid overheating.
4) Please check if the output voltage of any LED power supplies used comply with the working voltage of the
product.
5) Never connect any cables while power is on and always assure correct connections to avoid short circuits
before switching on.
6)
7) For update information please consult your supplier.
Please ensure that the cable is secured tightly in the connector
1) We provide lifelong technical assistance with this product:
5-year warranty. We print date on every products, for example :1125 means year 2011,week 25.The
warranty is for free repair or replacement and covers manufacturing faults only.
For faults beyond the 3-year warranty we reserve the right to charge for time and parts.
2) Limited Warrenty
Any defects caused by wrong operation.
Any damages caused by unauthorized removal, maintenance, modifying, incorrect connection and
replacement of chips.
Any damages due to transportation, vibration etc. after purchase.
Any damages caused by earthquake, fire, lightning, pollution and abnormal voltage.
Any damages caused by negligence, inappropriate storing at high temperatures and humidity or near
harmful chemicals.
Product has been updated
3) Repair or replacement as provided under this warranty is the exclusive remedy to the customer.
Operation
How to save color or mode
buttons can save the color from mode or save color when you touch color wheel or touch
buttons.
Press button ,mode runs, see favorite mode---> press or or or button over 3 seconds until
connected light flashes. Then it saved successful ly.
Touch color wheel or touch color temperature button or touch any buttons----> see favorite color--->
press button over 3 seconds until connected light flashes. Then it saved successfully
How to recall color or mode?
Touch S1/S2/S3/S4 directly. .