Sunricher SR-2820B User manual

43.58 mm
DC Version
RF Wall Panel
Controller
DC INPUT
RF RGBW Wall Mounted Controller Product Data
DC Version AC Version
Important: Read All Instructions Prior to Installation
Function introduction
Red channel:Click to turn off/on
Press and hold down to increase/
decrease light intensity
Touch color wheel, touch to
select R/G/B color
Blue channel:Click to turn off/on
Press and hold down to increase/
decrease light intensity
Click to select Warm White,
Natural White and Cool White
mixed by RGB colors
Press and hold down to
increase/decrease light
intensity
Green channel:Click to turn off/on
Press and hold down to increase/
decrease light intensity
White channel:Click to turn off/on
Press and hold down to increase/
decrease light intensity
Click to switch on/off
Click to play / pause the 10 built-in
effects, Press and hold down to
speed up/down the running effects
Press and hold down to save
color/effect; Click to recall the
•Touch sensitive
• Glass interface(white & black)
• Compatible with all universal series RF receivers
• Control RGBW color
• Control 1 zone/area
• Waterproof grade: IP20
Safety & Warnings
•DO NOT install with power applied to device.
•DO NOT expose the device to moisture.
Wiring diagram
DC Version
AC Version
saved
Front side
V-
V+
DC Power input
Back side
AC Power input
AC 100-240V
AC 100-240V
19.4 mm
RF Wall Panel
Controller
DC INPUT
12-24VDC
PSU
AC Power
50/60Hz
V+
V-
AC Version
RF Wall Panel
Controller
AC INPUT
L L N N
AC Version
RF Wall Panel
Controller
AC INPUT
AC Power
50/60Hz
N
N
L
L
83.00 mm 65.58 mm
Output Signal
RF signal
RF signal
Power Supply
12-24VDC
100-240VAC
Power consumption
200 mA
15 mA
Operating temperature
0-40°C
0-40°C
Relative humidity
8% to 80%
8% to 80%
Dimensions
75x120x29.1mm
75x120x29.1mm

Operation
Pair with RF receivers:
Click button of the
wall panel controller
Click “Learning Key”
on RF receiver
Touch the color wheel
of the wall controller
LED lights connected with the receiver
will flicker once means the receiver is
paired with the wall remote controller
How to delete the pairing:
Press and hold down “Learning Key” on the receiver for over 3 seconds until connected LED lights flicker twice,
which means the pairing is deleted successfully.
Installation