Swegon WISE Parasol a User manual

WISE Parasol a
Instructions for Use 05/04/2023
Article 942428035
The document was originally written in Swedish.
Content
Symbol key ................................................................. 1
Application area.................................................. 2
General .................................................................... 2
Contents................................................................... 2
Protective equipment................................................ 2
Electrical safety ......................................................... 2
Handling................................................................... 2
Installation................................................................ 2
Dimensions and weights.................................... 3
Dimensions ............................................................... 3
Weight ..................................................................... 3
Installation .......................................................... 4
Suspension ............................................................... 4
Water ....................................................................... 5
Air ............................................................................ 6
Commissioning.................................................... 7
Nozzle setting........................................................... 7
ADC ......................................................................... 7
Connections......................................................... 8
LED - Explanation...................................................... 8
Use........................................................................... 9
Trouble shooting....................................................... 9
Cleaning ................................................................... 9
Service/maintenance ................................................. 9
Materials and surface treatment................................ 9
Disposal.................................................................... 9
Product warranty ...................................................... 9
Technical data......................................................... 10
Electrical data ......................................................... 10
Declaration of Conformity ............................... 10
References .............................................................. 10
Maintenance...................................................... 11
Symbol key
Symbols on the machine.
This product complies with applicable
EU directives
Symbols in this user manual
Warning/Caution!

WISE Parasol
2Swegon reserves the right to alter specications. 05/04/2023
Application area
The product is a comfort module with integrated radio
transmitter designed for demand-controlled climate
indoors within Swegon’s ventilation system WISE. The
product is used to ventilate, cool and heat premises
exactly as needed.
The product may not be used for anything other than its
intended use.
General
Read through the entire instructions for use
before you install/use the product and save
the instructions for future reference. It is not
permissible to make changes or modify this
product other than those specified in this
document.
Contents
1 x WISE Parasol
1 x Instructions for use
Protective equipment
Always use appropriate personal protective
equipment for the work in question, in the
form of gloves, respirators, protective glasses
and helmets during handling, installation,
cleaning and service/maintenance.
Electrical safety
Permitted voltage, see Electrical data.
It is not permissible to insert foreign objects
into the product’s contactor connections or
ventilation openings; risk for short circuiting.
24 V isolation transformer to be connected should comply
with the provisions of IEC 61558-1.
Cable sizing must be carried out for cabling between the
product and the power supply source.
Disconnect the power supply when working on products
that are not required to run.
Always follow the local/national rules for who shall be
permitted to carry out this type of electrical installation.
Handling
Always use appropriate transport and lifting devices when
the product is to be handled to reduce ergonomic loads.
The product must be handled with care.
Installation
• Moist, cold and aggressive environments must be
avoided.
• Assemble the product according to this instruction and
applicable industry regulations.
• Install the product for easy access during service/main-
tenance.
• Avoid installing the product near a heat source.
• Check to make sure that the product does not have
any visible defects.
• Check that the product is properly secured after it has
been installed.
• Secure cables with cable ties.
• Check that all cables are properly secured in place after
installation.

3
05/04/2023 Swegon reserves the right to alter specications.
WISE Parasol
Dimensions and weights
Weight, WISE Parasol 1200
WISE Parasol Type Dry weight Water volume
(kg) cooling (l) heating (l)
1200 1192-A 25.8 1.4
1200 1192 - B 29.8 1.4 0.9
1200 1192-A - PF 28.1 1.4
1200 1192 - B- P F 32.1 1.4 0.9
1200 1192-X1 30.2 1.4
1200 1192-X 2 30.5 1.4
These are examples of the most common sizes of WISE Parasol. For the other variants,
refer to IC Design at www.swegon.com. Excl. sensor module WISE SMB (0.1 kg).
Dimensions, WISE Parasol 600
Dimensions (mm)
A B C ØD EF ** G H I
584 584 567 125/160* 567 220/250* 75/102* 50 63
592 592 567 125/160* 567 220/250* 75/102* 50 63
598 598 567 125/160* 567 220/250* 75/102* 50 63
617 617 567 125/160* 567 220/250* 75/102* 50 63
623 623 567 125/160* 567 220/250* 75/102* 50 63
642 642 567 125/160* 567 220/250* 75/102* 50 63
667 667 567 125/160* 567 220/250* 75/102* 50 63
* Dimensions refer to WISE Parasol 600 PF; ** When the sensor module WISE SMB is
installed in the face plate the height measurement (F) increases by 12 mm
Dimensions, WISE Parasol 1200
Dimensions (mm)
A B C ØD EF ** G H I
118 4 584 567 125/160* 1157 220/250* 75/102* 50 63
1192 592 567 125/160* 1157 220/250* 75/102* 50 63
1198 598 567 125/160* 1157 220/250* 75/102* 50 63
1242 617 567 125/160* 1157 220/250* 75/102* 50 63
1248 623 567 125/160* 1157 220/250* 75/102* 50 63
1292 642 567 125/160* 1157 220/250* 75/102* 50 63
1342 667 567 125/160* 1157 220/250* 75/102* 50 63
* Dimensions refer to WISE Parasol 1200 PF; ** When the sensor module WISE SMB
is installed in the face plate the height measurement (F) increases by 12 mm
F
A
E
B
C
I
H
G
D
Weight, WISE Parasol 600
WISE Parasol Type Dry weight Water volume
(kg) cooling (l) heating (l)
600 592-A 16 1.1
600 592-B 16.5 1.1 0.2
600 592-A-PF 17.5 1.1
600 592-B-PF 18 1.1 0.2
These are examples of the most common sizes of WISE Parasol. For the other variants,
refer to IC Design at www.swegon.com. Excl. sensor module WISE SMB (0.1 kg).
Dimensions
Weight

WISE Parasol
4Swegon reserves the right to alter specications. 05/04/2023
Installation
Suspension
M8
Dimensions, c/c
WISE Parasol
Size
c/c min-max (mm) c/c (mm)
G H
600 468-547 590
1200 468-547 119 0
H
H
G
G

5
05/04/2023 Swegon reserves the right to alter specications.
WISE Parasol

Note that compression ring couplings
require support sleeves inside the pipes.
WISE Parasol 600
WISE Parasol 1200
600
Värme retur/
Heating return
Kyla tillopp/
Cooling supply
Kyla retur/
Cooling return
Värme tillopp/
Heating supply
1200
Värme retur/
Heating return
Kyla tillopp/
Cooling supply
Kyla retur/
Cooling return
Värme tillopp/
Heating supply
Water connection with factory fitted valves
(In the example a WISE Parasol 1200 is shown)
Water connection without factory fitted valves
(In the example a WISE Parasol 1200 is shown)
Water
Location water pipes
POWER
STATUS
+
-
11
10
98
7
6
12345
COM


POWER
STATUS
+
-
11
10
98
7
6
12345
COM
Connection sizes
WISE PARASOL Model: Factory fitted Connection Coupling type Connection Coupling type
A only Cooling Actuators and valves Return DN15, male thread Supply pipe Plain pipe 12x1.0 mm
B Cooling/Heating Actuators and valves Return DN15, male thread Supply pipe Plain pipe 12x1.0 mm
A only Cooling - Return Plain pipe 12x1.0 mm Supply pipe Plain pipe 12x1.0 mm
B Cooling/Heating -Return Plain pipe 12x1.0 mm Supply pipe Plain pipe 12x1.0 mm
Note that pipes are connected in such a
way to provide a clear space for service in
front of the control equipment.
192 192
32
78 35
POWER
STATUS
+
-
11
10
98
7
6
12345
COM
192 192
78 35
POWER
STATUS
+
-
11
10
98
7
6
12345
COM
Water quality
Swegon recommends water quality according to VDI
2035-2 for both the heating and cooling systems. In order
to maintain the oxygen content in the water below the
levels (<0.1mg/l) prescribed in VDI 2035-2, it is recom-
mended to install a vacuum degasser, particularly in the
cooling system where it’s more challenging to dissolved
gas. It is also important that the pre-pressure in the
expansion vessel is dimensioned according to EN-12828
for both the heating and cooling systems and that regu-
lar checks are made of the pre-pressure. The cooling and
heating systems must be designed to prevent oxygen
from entering the system, this is particularly important to
consider when selecting flex hose, pipes and expansion
vessels. When the system is filled with fresh water, it has
an oxygen content of approximately 8mg/l, however, this
oxygen is consumed quickly through corrosion processes
and within a few days the oxygen in the water should be
consumed. Nevertheless, it is important to avoid filling the
system with fresh water unnecessarily.
Automatic deaerators are often installed to facilitate filling
of the system. It is recommended that the automatic
deaerators are turned off once the system has been fully
vented to avoid these drawing in air in the system if the
pre-pressure in the expansion vessel should drop.

WISE Parasol
6Swegon reserves the right to alter specications. 05/04/2023
Connection dimensions
Unit A =
WISE Parasol 600 MF Ø 125
WISE Parasol 600 PF Ø 160
WISE Parasol 1200 HF Ø 125
WISE Parasol 1200 PF Ø 160
Ø A
Air
Air connection side on delivery Alternative air connection side
1. Unscrew four screws each from the spigot and cover
2. Change the location of the spigot and cover
3. Screw the spigot and cover in position each with four screws on
the new side.

7
05/04/2023 Swegon reserves the right to alter specications.
WISE Parasol
+40°
-40°
0°
+40°
0°
q = k · √p [l/s]
i
[pi Pa]
q [l/s]
k= k-factor
p = [Pa]
i()
k
q2
Water Air
12
4
3
Nozzle configuration
H M L
H =
M=
L=
1 x 8
T-25
Commissioning
Fan-shape
X-shape
WISE Parasol is a part of the WISE system that demand-controls both air and water on a room level and guarantees the
highest level of indoor climate with minimum energy consumption. This means that when the installation and intercon-
nection of the system is completed, no further trimming is required except for the nozzle setting and any adjustment of
ADC.
Nozzle setting
ADC
Page 1-4

WISE Parasol
8Swegon reserves the right to alter specications. 05/04/2023
b. Connection of actuator
with 0-10 V control signal
NOTE! 24 V DC supply
a. Connection of thermal
actuator
There are different types of actuator
• For connection of the thermal actuator such as Swegon’s
actuator ACTUATORc, see figure a.
• For connection of actuators with 0-10 V control signal, see
figure b.
Actuator
with 0-10 V
control signal
0-10 V DC
Ground
24 V DC
24 V DC
Ground
Thermal
actuator
WISE Parasol with factory-fitted components
1. WISE CU (Controller Unit)
2. Temp. sensor (WISE DPS Modbus)
3. Motor, air damper
Factory fitted components as an option
• Sensor Module Advanced (WISE SMA), (Optional)
• Sensor Module Basic (WISE SMB), (Optional)
• Valves and actuators for cooling
• Valves and actuators for heating
• Temp. sensor
• Condensation sensor
Connections
POWER
STATUS
+
-
11
10
98
7
6
12345
COM
POWER
6 7 8 9 10 11
1 2 3 4 5
STATUS
COM
WISE Parasol, connection
LED - Explanation
Not paired
Colour Type
Energized White Permanent
Selected in TuneWISE White Flashing, fast
Prepared to be added
to the system White Flashing, slowly
To be added to the
system White Flashing, fast for 5 s
Paired
Colour Type
Normal operation Green Permanent
Restart Blue Permanent for 10 s
Initiation Blue Flashing
Boosted max. flow Orange Permanent
Boosted min. flow Orange Permanent
Boosted water flow Violet Permanent
Boosted water flow/
air flow Violet/Orange Alternating
POWER
STATUS
+
-
11
10
98
7
6
12345
COM
1
23
24 V AC
Valve actuator
(Optional)
Temp. sensor
(Optional)
Condensation
sensor
(Optional)
Pressure tube
Ground
0-10 V DC
Motor
WISE SMB
(Optional)
WISE SMA
(Optional)
WISE DPS Modbus
24 V DC
Cooling Heating
LED

9
05/04/2023 Swegon reserves the right to alter specications.
WISE Parasol
Use
Use TuneWISE for commissioning. Commissioning must
be performed by qualified and trained WISE service
engineers.
Use SuperWISE for settings, reading alarms, etc. refer to
the documentation for SuperWISE II / SuperWISE II SC.
Trouble shooting
The product is not shown in the system:
• Make sure that the product is energized. (e.g. diode)
• Make sure that the product is paired.
• Make sure the product is in the right network.
The product shows incorrect/no air flow/pressure
• Make sure that the product is installed according to the
recommended distance.
• Check that there is air flow/pressure.
• Check that the measuring tube is mounted correctly.
• Check that the measuring tube is undamaged.
The product does not regulate the air flow/pressure
• Check that the motor has not become detached from
the damper spindle.
• Check that the motor works by turning the motor’s
release button, turn the damper spindle, release the
knob and then see whether the motor starts to move.
The product shows incorrect/no temperature
• Make sure the temperature sensor is not missing.
• Make sure that the temperature sensor does not hang
outside the product.
• Check that the temperature sensor is connected to the
right input.
The product shows incorrect/no VOC/CO2
• Make sure the VOC/CO2 sensor (WISE SMA) is not
missing.
• Check that the VOC/CO2 sensor is connected to the
right input.
Cleaning
Ideally the product should be cleaned twice a year by
vacuuming the coil to remove loose dust. In fibre dense
environments a more frequent interval is recommended.
A simple visual inspection of connections is recommended
when cleaning.
Avoid aggressive cleaning agents which may harm
painted surfaces. Normally a mild soap or alcohol solution
is fully adequate for cleaning. See also the maintenance
section in this instructions for use.
Cleaning of electrical components
• If needed, use a dry cloth to clean the components.
• Never use water, detergent and cleaning solvent or a
vacuum cleaner.
Service/maintenance
• The product does not require any maintenance.
• In connection with a service, mandatory ventilation
inspection or cleaning of the ventilation system, check
that the general condition of the products looks ok.
Pay particular attention to the suspension, cables and
that they sit firmly in place.
• It is not permissible to open or repair electrical
components.
• If you suspect that the product or a component is
defective, please contact Swegon.
• A defective product or component must be replaced by
an original spare part from Swegon.
Materials and surface treatment
Sheet parts are made of galvanised sheet steel (Z275) and
pre-painted sheet SS-EN 10143+10346 - DX52D + ZA95,
NCS S 0500-N gloss 30+/-6%.
Disposal
Waste must be handled according to local regulations.
Product warranty
The product warranty or service agreement will not be in
effect/will not be extended if: (1) The product is repaired,
modified or changed, unless such repair, modification
or change has been approved by Swegon AB; or (2) the
serial number on the product has been made illegible or
is missing.

WISE Parasol
10 Swegon reserves the right to alter specications. 05/04/2023
WISE Parasol in standard version: VA /
unit
Standard
VA total
WISE CU 2.3
WISE DPS Modbus 0.8 5.1
Damper motor (315C) 2
Option: VA /
unit
Valve actuator,
ACTUATORc
1 pcs 2 pcs 3 pcs
612 18*
WISE SMA 0.8
WISE SMB 0.6
*Applies to products with CU ver. 2, delivered from 01.10.2019
Example:
WISE Parasol in standard version with the following options:
Actuator for cooling and heating as well as WISE SMA, gives a
total power consumption of 5.1 + 6 + 0.8 = 11.9 VA
Declaration of Conformity
Swegon AB hereby affirms that
WISE Parasol with integrated radio, complies with the
essential characteristic demands and relevant regulations
specified in the following directives: 2006/42/EC (MD),
2014/53/EU (RED) and 2011/65/EU (RoHS2):
The following standards have been observed:
EN ISO 12100:2010 Safety of machinery - General principles for
design - Risk assessment and risk mitigation
EN 60204-1:2006 Safety of machinery - Electrical equipment
of machines - Part 1: Generic standards
EN 60730-1:2011 Automatic electrical control and control
unit for household use - Part 1: Generic
standards
EN 60730-2-14:2009 Automatic electrical controls for household
and similar use - Part 2 Particular require-
ments for electric actuators
IEC 60529:1992+A2:2013 Degrees of protection provided by enclo-
sures (IP code)
EN 61000-6-2:2007 Electromagnetic compatibility (EMC).
Generic standards. Immunity for industrial
environments
EN 61000-6-3:2007 Electromagnetic compatibility (EMC).
Generic standards. Emission standard for
residential, commercial and light-industrial
environments
EN 300 328 V1.9.2, V1.9.1,
V1.8.1
Electromagnetic compatibility and Radio
spectrum Matters (ERM) - Wideband
Transmission systems - Data transmission
equipment operating in the 2.4 GHz ISM
band and using spread spectrum modula-
tion techniques
EN 60335-1:2012+A11:2014
EN 60335-2-30:2009+A11
EN 62233:2008
Electric household appliances and similar
appliances - Safety - Part 1: Generic stand-
ards
Persons responsible for this declaration:
Name: Robert Andersson, RU Director
Name: Carl-Ola Danielsson, R&D Manager
Address: Fallebergsvägen 17, 671 34 Arvika, Sweden
Date: Arvika 2019-10-01
This declaration is applicable only if the product has been
installed according to the instructions in this document and if
no modifications or changes have been made on this product.
Technical data
Max. radio frequency output: 50 mW
Frequency band: 2.45 GHz, IMS band
(2400--2483 MHz)
Temperature sensor: 0 - 50 °C ± -0.5 °C
Dynamic pressure sensor: 0 - 300 Pa
With WISE SMA
VOC sensor 450 - 2000 ppm
RH sensor: 0 - 100 RH%
IP class: IP20
Running time open/close (90°): 120 s
Ambient temperature
Operation: 0 – 50 °C
Storage: -20 – +50 °C
RH: 10 - 95%
(non condensing)
CE marking: 2006/42/EC (MD)
2014/53/EU (RED)
2011/65/EU (RoHS2
Electrical data
Power supply: 24V AC ±15% 50 - 60Hz
Connections pipe dim.
Power: Screw terminal max. 2.5mm2
Valve actuator: Push-in spring force connections,
max. 1.5 mm2
Max. power consumption: See table below
References
www.swegon.com
Building Materials Declaration
WISE Parasol product data sheet
WISE System Guide
SuperWISE II / SuperWISE II SC User Manual
WISE Project Planning Guide VS & Cooling, Electric & Control and
Ventilation

11
05/04/2023 Swegon reserves the right to alter specications.
WISE Parasol
3
1
2
4
5
Air duct
OPEN THIS SIDE
OPENTHISSIDE
Opens side A or B
Maintenance
OPENTHISSIDE
(Click)
A
B

WISE Parasol
12 Swegon reserves the right to alter specications. 05/04/2023
942428035